Proud to be a UK-based company
Contact us
Important compatibility info
| Outer diameter 2 | 135 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 54 mm |
| Outer diameter | 67 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Bolt Hole Circle Diameter | 100 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 1 | 55 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.59
Important compatibility info
| Port / Connector type | Voss 232 |
| External Thread Size | M22 x 1,5 |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Rolling piston material | Plastic |
| Thickness | 660 mm. 300 mm |
| Outer diameter | 258 mm |
| Placement on Vehicle | Rear Axle |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.58
Important compatibility info
| Thread Size | M27x1,5 |
| Bore Diameter | 10.5 mm |
| Bolt Hole Circle Diameter | 86 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 100 mm |
| External Teeth, Wheel Side | 30 |
| Number of mounting bores | 6 |
| Min. Length | 617 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Additional Information 2 | with nut |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.57
Important compatibility info
| Placement on Vehicle | Front Axle |
| Stabiliser Diameter | 31 mm |
| Function | Stabiliser Bar, suspension |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (174334)
- 2x Febi Mounting, stabiliser bar (23046)
- 2x Febi Link/Coupling Rod, stabiliser bar (27867)
- 4x Febi Nut (22263)
- 2x Febi Screw (31033)
- 2x Febi Screw (31032)
£132.56
Important compatibility info
| Function | Suspension, propshaft |
| Bearing Type | Ball Bearing |
| Type | Suspension, propshaft |
| Inner diameter | 30 mm |
| Additional Information 2 | with rolling bearing |
| Additional Information | with fastening/mounting material |
| Length | 193 mm |
| Hole Spacing | 168 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.56
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 1 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.51
Important compatibility info
| Type | Interior Blower |
| Number of Connectors / Ports | 4 |
| Voltage | 12 V |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.47
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 591 mm |
| Min. Length | 364 mm |
| Pipe Diameter | 76 mm. 63.4 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.45
Important compatibility info
| Replaces | 30338 |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 148 |
| Timing Chain Size | G53HR |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29864)
- 1x Febi Tensioner, timing chain (29856)
- 1x Febi Guide, timing chain (29539)
- 1x Febi Guide, timing chain (29538)
- 1x Febi Sliding Rail Bolts, timing chain (48336)
- 1x Febi Sliding Rail Bolts, timing chain (47397)
- 2x Febi Screw (47583)
- 1x Febi Pulley Bolt (48338)
- 1x Febi Sprocket, crankshaft (30458)
- 1x Febi Screw (170620)
£132.41
Important compatibility info
| Length | 570 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.40
Important compatibility info
| Thread Type | with right-hand thread |
| Placement on Vehicle | Front Axle |
| Length | 1729 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 50 mm |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.40
Important compatibility info
| Thickness | 56 mm |
| Number of Ribs | 8 |
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.40
Important compatibility info
| Housing material | Grey Cast Iron |
| Number of grooves | 1 |
| Number of Wings | 11 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.40
Important compatibility info
| Piston conrod diameter | 12.4 mm |
| Min. Length | 287 mm |
| Mounting points diameter | 12 mm |
| Max. Length | 363 mm |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Front |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.40
Important compatibility info
| Hole Spacing | 130 mm |
| Placement on Vehicle | Rear Axle |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.40
Important compatibility info
| Colour | Black, Green |
| Number of Connectors / Ports | 3 |
| Function | Control, swirl flaps (induction pipe) |
| Extra Description | febi Plus |
| Type | Control, swirl flaps (induction pipe) |
| for OE number | 11 61 7 579 114 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.40
Important compatibility info
| Stabiliser Diameter | 18 mm |
| for OE number | 204 326 06 65 S1 |
| Additional Information 2 | with coupling rod |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Placement on Vehicle | Rear Axle |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171139)
- 1x Febi Link/Coupling Rod, stabiliser bar (29695)
- 1x Febi Link/Coupling Rod, stabiliser bar (29694)
- 2x Febi Nut (06859)
- 2x Febi Nut, stabiliser bar (44514)
£132.40
Important compatibility info
| Hole Spacing | 125 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 625 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 58 mm |
| Mounting points diameter | 14 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.40
Important compatibility info
| Placement on Vehicle | Rear Axle |
| for OE number | 1K0 511 409 CA S1 |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Additional Information 2 | with coupling rod |
| Additional Information | with rubber mounts |
| Stabiliser Diameter | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (174081)
- 4x Febi Fastening Bolt, stabiliser bar (39643)
- 2x Febi Link/Coupling Rod, stabiliser bar (29461)
£132.40
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Number of Chain Links | 96 |
| for OE number | 06H 109 158 H S3 |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (45953)
- 1x Febi Tensioner, timing chain (101796)
- 1x Febi Guide, timing chain (49533)
- 1x Febi Guide, timing chain (49534)
- 1x Febi Guide, timing chain (49690)
£132.40
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023