Proud to be a UK-based company
Contact us
Important compatibility info
| Engine Management | Timing Chain |
| Function | Guide, timing chain |
| Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 127.5 mm |
| Width | 49 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Replaces | 16542 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 112 mm |
| Inner diameter 1 | 34 mm |
| Material | Thermoplast |
| Length | 170 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (18575)
- 1x Febi Clamping Clip (38759)
- 1x Febi Clamping Clip (45648)
- 3x Febi Molybdenum Grease (02582)
£15.05
Important compatibility info
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Inner diameter | 14.5 mm |
| Outer diameter | 65.5 mm |
| Width | 30 mm |
| for OE number | 028 105 263 D S1 |
| Placement on Vehicle | Front |
| Engine Management | Timing Belt |
| Function | Sprocket, crankshaft |
| Number of Teeth | 22 |
| Type | Sprocket, crankshaft |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sprocket, crankshaft (25170)
- 1x Febi Pulley Bolt (09590)
£15.05
Important compatibility info
| Outer diameter | 65 mm |
| Width | 30 mm |
| for OE number | 028 105 263 E S1 |
| Inner diameter | 14.5 mm |
| Placement on Vehicle | Front |
| Engine Management | Timing Belt |
| Function | Sprocket, crankshaft |
| Type | Sprocket, crankshaft |
| Number of Teeth | 22 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sprocket, crankshaft (25166)
- 1x Febi Pulley Bolt (09590)
£15.05
Important compatibility info
| Length | 102 mm |
| Function | Intake Valve |
| Paired article numbers | 26527 |
| Type | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Length | 1930 mm |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Internal Thread Size | M10 x 1 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 585 mm |
| Spanner Size | 17 |
| Function | Brake Hose |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Height | 80 mm |
| Outer diameter | 394 mm |
| Inner diameter | 293 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | NBR (nitrile butadiene rubber) |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 1924 mm |
| Paired article numbers | 36674 |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
| Additional Information | with accessories |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Function | Seal Kit, multi-valve |
| Type | Seal Kit, multi-valve |
| Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal, air compressor (35701)
- 1x Febi Seal, air compressor (35729)
- 1x Febi Cylinder Head Gasket, air compressor (35730)
- 1x Febi Seal Kit, multi-valve (35768)
- 2x Febi Nut (35732)
- 2x Febi Seal Kit, multi-valve (35733)
- 1x Febi Seal, air compressor (35731)
£15.05
Important compatibility info
| Joint Type | Tripod Joint |
| Length | 95 mm |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Inner diameter 1 | 28 mm |
| Inner diameter 2 | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100213)
- 1x Febi Clamping Clip (29820)
- 1x Febi Clamping Clip (45645)
- 2x Febi Molybdenum Grease (02582)
£15.05
Important compatibility info
| Material | Steel |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Length | 1330 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| DIN / ISO | 7867 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Material | FPM (fluoride rubber) |
| Function | Repair Kit, shift cylinder |
| Type | Repair Kit, shift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Length | 1548 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Thickness | 20 mm |
| Function | Nut, kingpin |
| Spanner Size | 67 |
| Internal Thread Size | M52 x 1,5 |
| Bolt Head/Nut Design | Male Star |
| Type | Nut, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Material | Plastic |
| Function | Cap, coolant tank |
| Opening Pressure | 2 bar |
| for OE number | 17 11 7 639 021 |
| Type | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 462 mm |
| Spanner Size | 15 |
| Thread Length | 10 mm |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 299 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod, Suspension Rod |
| Thickness | 79.1 mm |
| Paired article numbers | 104619 |
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Length | 35.5 mm |
| Additional Information | with nuts |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,5 |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Steel |
| Paired article numbers | 104618 |
| Thickness | 79.1 mm |
| Rod/Strut | Suspension Rod, Coupling Rod |
| Thread Length | 35.5 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| Length | 299 mm |
| Extra Description | ProKit |
| External Thread Size | M10 x 1,5 |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Inner diameter | 14 mm |
| Function | Bushing, leaf spring |
| Material | Rubber/Metal |
| Outer diameter | 37 mm |
| Length | 80 mm |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Outer diameter | 50 mm |
| Function | Thermostat, coolant |
| Opening Temperature | 83 °C |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Width | 8 mm |
| Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
| Outer diameter | 50 mm |
| Inner diameter | 24 mm |
| Colour | Black |
| Function | Shaft Seal, camshaft |
| Type | Shaft Seal, camshaft |
| Placement on Vehicle | frontal sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Length | 78 mm |
| Operating Mode | Electric |
| Function | Stop Light Switch |
| Type | Stop Light Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Material | Aluminium, ACM (Polyacrylate) |
| Function | Gasket, timing case cover |
| Type | Gasket, timing case cover |
| for OE number | 1 754 585 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Voltage from | 12 V |
| Voltage to | 24 V |
| Protection Type (IP Code) | IP67 |
| Function | End Outline Marker Light |
| Port / Connector type | PRS |
| Colour | White |
| Cable Length | 500 mm |
| Fulfils ECE norm | R3, R7 |
| Type | End Outline Marker Light |
| Width | 111 mm |
| Height | 50 mm |
| Depth | 24 mm |
| Light Design | LED |
| Mounting bores distance | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Function | Wire Brush, brake caliper cleaning |
| Type | Wire Brush, brake caliper cleaning |
| Additional Information 2 | with hook |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Height | 23 mm |
| Outer diameter | 90 mm |
| Spanner Size | 80 |
| Type | Nut, kingpin |
| Function | Nut, kingpin |
| Internal Thread Size | M73 x 1,5 |
| Material | Steel |
| Surface | Phosphatized |
| Bolt Head/Nut Design | External Hexagon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Thickness | 60 mm |
| Inner diameter | 14.5 mm |
| Outer diameter | 66 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 450 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| External Thread Size | M10 x 1,25, M12 x 1,25 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 74 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Colour | Silver |
| Surface | Zinc-coated |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.04
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 37354 |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Hole Spacing | 104 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.04
Important compatibility info
| Cone Size | 18 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 1,5 |
| Function | Ball Joint |
| Mounting points diameter | 10.5 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information | with fastening/mounting material |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (24847)
- 3x Febi Screw (24362)
- 3x Febi Nut (24361)
£15.04
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 37 mm |
| Outer diameter | 52 mm |
| Inner diameter | 25 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.04
Important compatibility info
| Internal Thread Size | M12 x 1,25 |
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Left |
| Length | 110 mm |
| Thickness | 71 mm |
| Spanner Size | 17 |
| Paired article numbers | 41368 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.04
Important compatibility info
| Function | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 292 mm |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.04
Important compatibility info
| Length | 229 mm |
| Height | 71 mm |
| Width | 213 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.04
Important compatibility info
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 291 mm |
| Function | Inner Tie Rod |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M16 x 1,5 |
| for OE number | 16 09 029 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.04
Important compatibility info
| for OE number | 1 692 412 |
| Function | Washer Fluid Pump, window cleaning |
| Pump Type | Dual Pump |
| Number of Connectors / Ports | 2 |
| Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.04
Important compatibility info
| Length | 85 mm |
| Height | 85 mm |
| Outer diameter | 85 mm |
| Filter type | Filter Insert |
| Seal Diameter | 79 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.04
Important compatibility info
| Material | Rubber/Metal |
| Function | Mounting, steering gear |
| Type | Mounting, steering gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.04
Important compatibility info
| Type | Brake Hose |
| Placement on Vehicle | Front Axle Right |
| Length | 700 mm |
| Spanner Size | 15 |
| Paired article numbers | 178636 |
| Thread Length | 10 mm |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.04
Important compatibility info
| Type | Brake Hose |
| Function | Brake Hose |
| Placement on Vehicle | Front Axle Left |
| Length | 700 mm |
| Spanner Size | 12 |
| Paired article numbers | 178631 |
| Thread Length | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.04
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 308 mm |
| Additional Information | with counter nut |
| Outer diameter | 40 mm |
| Spanner Size | 33 |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.04
Important compatibility info
| Additional Information | with lock nut |
| Paired article numbers | 180983 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M10 x 1,25 |
| Internal Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Right |
| Spanner Size | 19 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.04
Important compatibility info
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| Length | 65 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,25 |
| Colour | Black |
| Spanner Size | 19 |
| Rod/Strut | Coupling Rod |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.03
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023