Important compatibility info
| Piston Diameter | 38 mm |
| Function | Brake Caliper |
| Manufacturer Restriction | TRW |
| Paired article numbers | BHN1105E |
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake Caliper Type | Fist-type Caliper, Brake caliper with adjusting element for electr. handbrake |
| Material | Aluminium |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
Important compatibility info
| Piston Diameter | 38 mm |
| Material | Aluminium |
| Brake Caliper Type | Fist-type Caliper, Brake caliper with adjusting element for electr. handbrake |
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | BHN1104E |
| Manufacturer Restriction | TRW |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
Important compatibility info
| Piston Diameter | 38 mm |
| Material | Aluminium |
| Brake Caliper Type | Fist-type Caliper, Brake caliper with adjusting element for electr. handbrake |
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | BHN1104E |
| Manufacturer Restriction | TRW |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
Important compatibility info
| Additional Information | with gaskets/seals |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Material | Plastic |
Important compatibility info
| Voltage | 24 V |
| Number of Teeth | 12 |
| Rated Power | 5.5 kW |
| Type | Starter |
| Function | Starter |
| for OE number | 22602940 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Number of Teeth | 12 |
| Rated Power | 5.5 kW |
| Type | Starter |
| Function | Starter |
| for OE number | 22602940 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Ignition Coil |
| Number of Inlets / Outlets | 1 |
| Number of Poles | 3 -pin connector |
| Technical Information Number | TC-22A |
| Height | 500 mm |
| Width | 90 mm |
| Length | 165 mm |
| Type | Ignition Coil |
| Placement on Vehicle | Front |
Important compatibility info
| Function | Ignition Coil |
| Number of Inlets / Outlets | 1 |
| Number of Poles | 3 -pin connector |
| Technical Information Number | TC-22A |
| Height | 500 mm |
| Width | 90 mm |
| Length | 165 mm |
| Type | Ignition Coil |
| Placement on Vehicle | Front |
Important compatibility info
| Additional Information | with synthetic grease |
| Clutch | Conversion from dual-mass flywheel to single-mass flywheel |
| Additional Information 2 | with bolts/screws, with flywheel, with clutch release bearing |
| Multi-piece | Four-piece |
| Function | Clutch Kit |
| Number of Teeth | 28 |
| Outer diameter | 228 mm |
| Extra Description | SMARTFIT Conversion Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with synthetic grease |
| Clutch | Conversion from dual-mass flywheel to single-mass flywheel |
| Additional Information 2 | with bolts/screws, with flywheel, with clutch release bearing |
| Multi-piece | Four-piece |
| Function | Clutch Kit |
| Number of Teeth | 28 |
| Outer diameter | 228 mm |
| Extra Description | SMARTFIT Conversion Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | Approved |
| To be used with part number(s) | FK91716 |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Placement on Vehicle | Rear |
| Product met | Euro 5 |
| Material | Ceramic |
Important compatibility info
| Extra Description | Approved |
| To be used with part number(s) | FK91716 |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Placement on Vehicle | Rear |
| Product met | Euro 5 |
| Material | Ceramic |
Important compatibility info
| Material | Aluminium |
| Number of mounting bores at central releaser | 2 |
| Weight | 7.45 kg |
| Additional Information 2 | without sensor |
| Extra Description | KIT3P (CSC) |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Hub Profile | 25 x 21 |
| Number of Teeth | 21 |
| Bore Diameter | 31 mm |
| Additional Information | with central slave cylinder |
| External diameter, clutch pressure plate | 240 mm |
Additional Information
- 1x Valeo Clutch Kit (826374)
- 1x Valeo Central Slave Cylinder, clutch (810067)
Important compatibility info
| Material | Aluminium |
| Number of mounting bores at central releaser | 2 |
| Weight | 7.45 kg |
| Additional Information 2 | without sensor |
| Extra Description | KIT3P (CSC) |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Hub Profile | 25 x 21 |
| Number of Teeth | 21 |
| Bore Diameter | 31 mm |
| Additional Information | with central slave cylinder |
| External diameter, clutch pressure plate | 240 mm |
Additional Information
- 1x Valeo Clutch Kit (826374)
- 1x Valeo Central Slave Cylinder, clutch (810067)
Important compatibility info
| Model | COMBO DOBLO |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Length 2 | 1035 mm |
| Manufacturer | FIAT VAUXHALL |
| Length 1 | 1325 mm |
Important compatibility info
| Model | COMBO DOBLO |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Length 2 | 1035 mm |
| Manufacturer | FIAT VAUXHALL |
| Length 1 | 1325 mm |
Important compatibility info
| Function | Fuel Pump |
| Operating Mode | Electric |
| Type | Fuel Pump |
Important compatibility info
| Function | Fuel Pump |
| Operating Mode | Electric |
| Type | Fuel Pump |
Important compatibility info
| Additional Information | with gasket/seal |
| Operating Mode | Electric |
| Valve type | Solenoid Valve |
| Function | EGR Valve |
| Type | EGR Valve |
Important compatibility info
| Additional Information | with gasket/seal |
| Operating Mode | Electric |
| Valve type | Solenoid Valve |
| Function | EGR Valve |
| Type | EGR Valve |
Important compatibility info
| Vehicle Equipment | for vehicles without air conditioning |
| Replaced by | CR866000P |
| Net Weight | 3653 g |
| Manufacturer | produced by MAHLE |
| Packaging height | 62.00 cm |
| Packaging length | 119.0 cm |
| Packaging width | 13.50 cm |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Extra Description | BEHR *** PREMIUM LINE *** |
| Radiator type | Mechanically jointed cooling fins |
| Core Length | 776 mm |
| Core Width | 480 mm |
| Core Depth | 26 mm |
| Water tank material (radiator) | Plastic |
Additional Information
General Information
PREMIUM LINE - OE Quality for customers expecting the optimum
General Information
The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
Important compatibility info
| Vehicle Equipment | for vehicles without air conditioning |
| Replaced by | CR866000P |
| Net Weight | 3653 g |
| Manufacturer | produced by MAHLE |
| Packaging height | 62.00 cm |
| Packaging length | 119.0 cm |
| Packaging width | 13.50 cm |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Extra Description | BEHR *** PREMIUM LINE *** |
| Radiator type | Mechanically jointed cooling fins |
| Core Length | 776 mm |
| Core Width | 480 mm |
| Core Depth | 26 mm |
| Water tank material (radiator) | Plastic |
Additional Information
General Information
PREMIUM LINE - OE Quality for customers expecting the optimum
General Information
The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
Important compatibility info
| Type | Drive Shaft |
| Diameter 2 | 108 mm |
| Function | Drive Shaft |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 660 mm |
| External Teeth, Wheel Side | 42 |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1280)
Important compatibility info
| Type | Drive Shaft |
| Diameter 2 | 108 mm |
| Function | Drive Shaft |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 660 mm |
| External Teeth, Wheel Side | 42 |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1280)
Important compatibility info
| Capacity | 36 l |
| Operating Pressure | 12.5 bar |
| Length | 609 mm |
| Material | Steel |
| Outer diameter | 300 mm |
| Function | Air Tank, compressed-air system |
| Number of Connectors / Ports | 7 |
| Internal Thread Size | M22 x 1,5 |
| Placement on Vehicle | Lower |
| Type | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | High-pressure Pump |
| Function | High-pressure Pump |
Important compatibility info
| Type | High-pressure Pump |
| Function | High-pressure Pump |
Important compatibility info
Important compatibility info
| Piston Diameter | 43 mm |
| for brake disc diameter | 305 mm |
| Brake Disc Type | Solid |
| Brake System | VARGA |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 12 mm |
| Placement on Vehicle | Rear Axle Right |
| Type | Brake Caliper |
| Function | Brake Caliper |
Important compatibility info
| Piston Diameter | 43 mm |
| for brake disc diameter | 305 mm |
| Brake Disc Type | Solid |
| Brake System | VARGA |
| Brake Caliper Type | Brake Caliper (1 piston) |
| for brake disc thickness | 12 mm |
| Placement on Vehicle | Rear Axle Right |
| Type | Brake Caliper |
| Function | Brake Caliper |
Important compatibility info
| Outer diameter | 225 mm |
| Number of Teeth | 21 |
| Multi-piece | Three-piece |
| Additional Information | with synthetic grease |
| Additional Information 2 | with clutch release bearing |
| Type | Clutch Kit |
| Function | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Disc (ADK83125)
- 1x Blue Print Clutch Pressure Plate (ADK83216N)
- 1x Blue Print Clutch Release Bearing (ADK83310)
Important compatibility info
| Outer diameter | 225 mm |
| Number of Teeth | 21 |
| Multi-piece | Three-piece |
| Additional Information | with synthetic grease |
| Additional Information 2 | with clutch release bearing |
| Type | Clutch Kit |
| Function | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Disc (ADK83125)
- 1x Blue Print Clutch Pressure Plate (ADK83216N)
- 1x Blue Print Clutch Release Bearing (ADK83310)
Important compatibility info
| Type | Soot/Particulate Filter, exhaust system |
| Includes fitting kit | FK11188A |
| Labels & Certifications | Euro 5 |
| Guarantee | 3 years guarantee |
| Inspection Tag | E24-103R |
| Function | Soot/Particulate Filter, exhaust system |
| Extra Description | Approved |
| Material | Silicon carbide |
| To be used with part number(s) | FK11188, PP11188A |
| Product met | Euro 5 |
Important compatibility info
| Type | Soot/Particulate Filter, exhaust system |
| Includes fitting kit | FK11188A |
| Labels & Certifications | Euro 5 |
| Guarantee | 3 years guarantee |
| Inspection Tag | E24-103R |
| Function | Soot/Particulate Filter, exhaust system |
| Extra Description | Approved |
| Material | Silicon carbide |
| To be used with part number(s) | FK11188, PP11188A |
| Product met | Euro 5 |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1 kW |
| Number of mounting bores | 2 |
| Number of Thread Bores | 1 |
| Function | Starter |
| Type | Starter |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1 kW |
| Number of mounting bores | 2 |
| Number of Thread Bores | 1 |
| Function | Starter |
| Type | Starter |
Important compatibility info
| Rated Power | 1.7 kW |
| Replaces | 0986015620 |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 45 ° |
| Jaw opening angle measurement [Degree] | 135 ° |
| Starter Type | Self-supporting |
| Bore Diameter 2 | 10.5 mm |
| Pinion Rest Position | 27.5 mm |
| Connecting Angle | 45 ° |
| Clamp | 30, 50, 30h |
| Position / Degree | links ° |
| Flange Diameter | 76.2 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 10.5 mm |
| Number of Teeth | 9 |
| Length | 263 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Rated Power | 1.7 kW |
| Replaces | 0986015620 |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 45 ° |
| Jaw opening angle measurement [Degree] | 135 ° |
| Starter Type | Self-supporting |
| Bore Diameter 2 | 10.5 mm |
| Pinion Rest Position | 27.5 mm |
| Connecting Angle | 45 ° |
| Clamp | 30, 50, 30h |
| Position / Degree | links ° |
| Flange Diameter | 76.2 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 10.5 mm |
| Number of Teeth | 9 |
| Length | 263 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | Lucas Premium Blade |
| Function | NOx Sensor, NOx catalytic converter |
| Type | NOx Sensor, NOx catalytic converter |
| Placement on Vehicle | after SCR catalytic converter |
| Thread Size | M18 x 1.5 |
| Number of Poles | 6 -pin connector |
| Spanner Size | 22 |
| Weight | 0.395 kg |
| Housing Colour | grey |
| Connector Shape | oval |
| Cable Length | 100 mm |
| Net weight | 0.292 kg |
Important compatibility info
| Extra Description | Lucas Premium Blade |
| Function | NOx Sensor, NOx catalytic converter |
| Type | NOx Sensor, NOx catalytic converter |
| Placement on Vehicle | after SCR catalytic converter |
| Thread Size | M18 x 1.5 |
| Number of Poles | 6 -pin connector |
| Spanner Size | 22 |
| Weight | 0.395 kg |
| Housing Colour | grey |
| Connector Shape | oval |
| Cable Length | 100 mm |
| Net weight | 0.292 kg |
Important compatibility info
| Function | NOx Sensor, NOx catalytic converter |
| Type | NOx Sensor, NOx catalytic converter |
| Extra Description | Lucas Premium Blade |
| Thread Size | M18 x 1.5 |
| Number of Poles | 5 -pin connector |
| Spanner Size | 22 |
| Weight | 0.387 kg |
| Housing Colour | black |
| Connector Shape | oval |
| Cable Length | 895 mm |
| Net weight | 0.284 kg |
Important compatibility info
| Function | NOx Sensor, NOx catalytic converter |
| Type | NOx Sensor, NOx catalytic converter |
| Extra Description | Lucas Premium Blade |
| Thread Size | M18 x 1.5 |
| Number of Poles | 5 -pin connector |
| Spanner Size | 22 |
| Weight | 0.387 kg |
| Housing Colour | black |
| Connector Shape | oval |
| Cable Length | 895 mm |
| Net weight | 0.284 kg |
Important compatibility info
| Extra Description | Lucas Premium Blade |
| Function | NOx Sensor, NOx catalytic converter |
| Type | NOx Sensor, NOx catalytic converter |
| Thread Size | M18 x 1.5 |
| Number of Poles | 5 -pin connector |
| Spanner Size | 22 |
| Weight | 0.363 kg |
| Housing Colour | black |
| Connector Shape | oval |
| Cable Length | 595 mm |
| Net weight | 0.26 kg |
Important compatibility info
| Extra Description | Lucas Premium Blade |
| Function | NOx Sensor, NOx catalytic converter |
| Type | NOx Sensor, NOx catalytic converter |
| Thread Size | M18 x 1.5 |
| Number of Poles | 5 -pin connector |
| Spanner Size | 22 |
| Weight | 0.363 kg |
| Housing Colour | black |
| Connector Shape | oval |
| Cable Length | 595 mm |
| Net weight | 0.26 kg |
Important compatibility info
| Extra Description | Lucas Premium Blade |
| Type | NOx Sensor, NOx catalytic converter |
| Function | NOx Sensor, NOx catalytic converter |
| Thread Size | M18 x 1.5 |
| Number of Poles | 5 -pin connector |
| Spanner Size | 22 |
| Weight | 0.355 kg |
| Housing Colour | black |
| Connector Shape | oval |
| Cable Length | 844 mm |
| Net weight | 0.252 kg |
Important compatibility info
| Extra Description | Lucas Premium Blade |
| Type | NOx Sensor, NOx catalytic converter |
| Function | NOx Sensor, NOx catalytic converter |
| Thread Size | M18 x 1.5 |
| Number of Poles | 5 -pin connector |
| Spanner Size | 22 |
| Weight | 0.355 kg |
| Housing Colour | black |
| Connector Shape | oval |
| Cable Length | 844 mm |
| Net weight | 0.252 kg |
Important compatibility info
| Operating Mode | Hydraulic |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Pulleys | without belt pulley |
| Belt Pulley Diameter | 124 mm |
| Number of grooves | 7 |
Important compatibility info
| Operating Mode | Hydraulic |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| Pulleys | without belt pulley |
| Belt Pulley Diameter | 124 mm |
| Number of grooves | 7 |
Important compatibility info
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 25 |
| Number of Teeth, ABS ring | 46 |
| ABS Ring Diameter | 82 mm |
| Multi-piece | One-piece |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Length | 660 mm |
| Replaces | KI133L; KI172L |
| Inner Length | 63 mm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


























