Important compatibility info
| Additional Information | without gasket/seal |
| Function | Throttle body |
| Connector Shape | Rectangular |
| Housing Colour | Black |
| Inlet Diameter | 46 mm |
| Number of Poles | 6 -pin connector |
| Weight | 1.225 kg |
| Type | Throttle body |
| Mounting Type | Bolted |
| Net weight | 1.122 kg |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Mounting Type | Bottom eye, Top yoke |
| Type | Air Suspension Strut |
| Function | Air Suspension Strut |
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Mounting Type | Bottom eye, Top yoke |
| Type | Air Suspension Strut |
| Function | Air Suspension Strut |
Important compatibility info
Important compatibility info
| Additional Information | with pilot bearing |
| Number of mounting bores | 6 |
| Transmission Type | Manual Transmission |
| Function | Flywheel |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Additional Information | with pilot bearing |
| Number of mounting bores | 6 |
| Transmission Type | Manual Transmission |
| Function | Flywheel |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Extra Description | LuK DMF |
| Type | Flywheel |
| Function | Flywheel |
| Transmission Type | Manual Transmission |
| Number of mounting bores | 8 |
| Number of Teeth | 137 |
Important compatibility info
| Extra Description | LuK DMF |
| Type | Flywheel |
| Function | Flywheel |
| Transmission Type | Manual Transmission |
| Number of mounting bores | 8 |
| Number of Teeth | 137 |
Important compatibility info
| Width | 58 mm |
| Additional Information | with accessories |
| Material | Metal |
| Outer diameter | 160 mm |
| Additional Information 2 | with damping |
| Inner diameter | 13 mm |
| Number of grooves | 6 |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | DriveAlign™ |
Additional Information
- 1x Gates Bolt and Nut Kit (SET190)
Important compatibility info
| Width | 58 mm |
| Additional Information | with accessories |
| Material | Metal |
| Outer diameter | 160 mm |
| Additional Information 2 | with damping |
| Inner diameter | 13 mm |
| Number of grooves | 6 |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | DriveAlign™ |
Additional Information
- 1x Gates Bolt and Nut Kit (SET190)
Important compatibility info
| for OE number | 55567740CA |
| Type | Fuel Pump |
| Function | Fuel Pump |
Important compatibility info
| for OE number | 55567740CA |
| Type | Fuel Pump |
| Function | Fuel Pump |
Important compatibility info
| Additional Information 2 | with exhaust manifold |
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit, motor-specific oil supply lines (feed/return) |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo NEW |
| Manufacturer | Garrett |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Replaces | 400007210 |
| Type | Mounting Tool Set, clutch/ flywheel |
| Clutch Equipment | SAC |
| Adjustment | with automatic adjustment |
| Transmission Type | for manual transmission |
| Function | Mounting Tool Set, clutch/ flywheel |
Important compatibility info
| Width | 82.8 mm |
| Additional Information | without accessories |
| Outer diameter | 192.5 mm |
| Inner diameter | 15 mm |
| Number of grooves | 6 |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | DriveAlign™ |
Important compatibility info
| Width | 82.8 mm |
| Additional Information | without accessories |
| Outer diameter | 192.5 mm |
| Inner diameter | 15 mm |
| Number of grooves | 6 |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | DriveAlign™ |
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | without LED control unit for daytime running-/position ligh, without control unit for dynamic bending light (AFS), with bulb |
| Additional Information 2 | without ballast, without glow discharge lamp, with motor for headlamp levelling |
| Voltage | 12 V |
| Vehicle Equipment | for vehicles with Xenon light, for vehicles with dynamic bending light |
| Paired article numbers | 1LL 011 150-371 |
| Bulb Type | PSY24W, D3S/H7, LED |
| Light Function | with indicator, with high beam, with position light, with daytime running light (LED), with low beam, with dynamic bending light |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Light Design | LED, Bi-Xenon |
| Number of light functions | 6 |
| Registration Type | ECE approved |
| Country Version | Europe |
| Type | Headlight |
| Function | Headlight |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb (8GH007157-121)
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | without LED control unit for daytime running-/position ligh, without control unit for dynamic bending light (AFS), with bulb |
| Additional Information 2 | without ballast, without glow discharge lamp, with motor for headlamp levelling |
| Voltage | 12 V |
| Vehicle Equipment | for vehicles with Xenon light, for vehicles with dynamic bending light |
| Paired article numbers | 1LL 011 150-371 |
| Bulb Type | PSY24W, D3S/H7, LED |
| Light Function | with indicator, with high beam, with position light, with daytime running light (LED), with low beam, with dynamic bending light |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Light Design | LED, Bi-Xenon |
| Number of light functions | 6 |
| Registration Type | ECE approved |
| Country Version | Europe |
| Type | Headlight |
| Function | Headlight |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb (8GH007157-121)
Important compatibility info
| for OE number | 33100 2A600 |
| Exhaust Emission Norm | Euro 6 |
| Type | Fuel Pump |
| Function | Fuel Pump |
| Gross Weight | 3.434 kg |
Important compatibility info
| for OE number | 33100 2A600 |
| Exhaust Emission Norm | Euro 6 |
| Type | Fuel Pump |
| Function | Fuel Pump |
| Gross Weight | 3.434 kg |
Important compatibility info
| Number of grooves | 7 |
| Type | Compressor, air conditioning |
| Manufacturer Restriction | DENSO, PORSCHE |
| for OE number | 94812601102 |
| Compressor ID | 7SEU17C |
| Refrigerant | R 134a |
| Length | 228.3 mm |
| Height | 138 mm |
| Number of Ribs | 7 |
| Belt Pulley Diameter | 120 mm |
| Quality | OE |
| Function | Compressor, air conditioning |
| Weight | 5700 g |
| Oil Fill Quantity | 110 ml |
| Compressor Oil | ND-8 |
| Mounting Type | Bolted |
| Gross Weight | 6510 g |
Important compatibility info
| Number of grooves | 7 |
| Type | Compressor, air conditioning |
| Manufacturer Restriction | DENSO, PORSCHE |
| for OE number | 94812601102 |
| Compressor ID | 7SEU17C |
| Refrigerant | R 134a |
| Length | 228.3 mm |
| Height | 138 mm |
| Number of Ribs | 7 |
| Belt Pulley Diameter | 120 mm |
| Quality | OE |
| Function | Compressor, air conditioning |
| Weight | 5700 g |
| Oil Fill Quantity | 110 ml |
| Compressor Oil | ND-8 |
| Mounting Type | Bolted |
| Gross Weight | 6510 g |
Important compatibility info
| Labels & Certifications | Euro 4 |
| Function | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Material | Cordierite |
| To be used with part number(s) | FK11245, PP11245A, PP11245B, PP11245C |
| Type | Soot/Particulate Filter, exhaust system |
| Product met | Euro 4 |
Important compatibility info
| Labels & Certifications | Euro 4 |
| Function | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Material | Cordierite |
| To be used with part number(s) | FK11245, PP11245A, PP11245B, PP11245C |
| Type | Soot/Particulate Filter, exhaust system |
| Product met | Euro 4 |
Important compatibility info
| Additional Information 2 | with screw set |
| Number of mounting bores | 3 |
| Transmission Type | Manual Transmission |
| Function | Flywheel |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Additional Information 2 | with screw set |
| Number of mounting bores | 3 |
| Transmission Type | Manual Transmission |
| Function | Flywheel |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Type | Fuel Pump |
| Function | Fuel Pump |
Important compatibility info
| Type | Fuel Pump |
| Function | Fuel Pump |
Important compatibility info
| Number of Inlets / Outlets | 3 |
| Net weight | 0.288 kg |
| Function | Nozzle and Holder Assembly |
| Manufacturer Restriction | Bosch |
| Type | Nozzle and Holder Assembly |
| Housing Colour | black/grey |
Important compatibility info
| Number of Inlets / Outlets | 3 |
| Net weight | 0.288 kg |
| Function | Nozzle and Holder Assembly |
| Manufacturer Restriction | Bosch |
| Type | Nozzle and Holder Assembly |
| Housing Colour | black/grey |
Important compatibility info
| Cold Cranking Amperage (CCA) | 1300 A |
| Type | AGM |
| Terminal Type | Threaded Post |
| Width | 125 mm |
| Height | 317 mm |
| Length | 581 mm |
| Voltage | 12 V |
| Ampere-Hours | 214 A |
| NCC Class | A |
| Marine Cranking Amperage (MCA) | 1450 A |
| PHCA (5 sec) | 1800 A |
| Terminal Layout | Terminals on End, Positive Right |
| Battery Capacity 10h (Ah) | 190 Ah |
| Warranty | 2 year warranty |
Important compatibility info
| Type | Soot/Particulate Filter, exhaust system |
| Labels & Certifications | Euro 5 |
| Function | Soot/Particulate Filter, exhaust system |
Additional Information
Important compatibility info
| Type | Soot/Particulate Filter, exhaust system |
| Labels & Certifications | Euro 5 |
| Function | Soot/Particulate Filter, exhaust system |
Additional Information
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 3. 5 |
| Function | EGR Valve |
| Additional Information | with suction pipe, with gasket/seal |
| Type | EGR Valve |
| for OE number | 1 668 595 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 3. 5 |
| Function | EGR Valve |
| Additional Information | with suction pipe, with gasket/seal |
| Type | EGR Valve |
| for OE number | 1 668 595 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Important compatibility info
| Additional Information | with oil supply line |
| Additional Information 2 | with mounting kit |
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo ProKit NEW |
| Manufacturer | Garrett |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charger, charging (supercharged/turbocharged) (186706)
- 1x Febi Mounting Kit, charger (187907)
- 1x Febi Oil Line, charger (187858)
Important compatibility info
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo NEW |
| Manufacturer | Garrett |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Labels & Certifications | Euro 4 |
| Product met | Euro 4 |
| Function | Soot/Particulate Filter, exhaust system |
| Guarantee | 3 years guarantee |
| Material | Silicon carbide |
| Type | Soot/Particulate Filter, exhaust system |
| Placement on Vehicle | Right |
| To be used with part number(s) | FK11341 |
Important compatibility info
| Labels & Certifications | Euro 4 |
| Product met | Euro 4 |
| Function | Soot/Particulate Filter, exhaust system |
| Guarantee | 3 years guarantee |
| Material | Silicon carbide |
| Type | Soot/Particulate Filter, exhaust system |
| Placement on Vehicle | Right |
| To be used with part number(s) | FK11341 |
Important compatibility info
| Net weight | 6 kg |
| Extra Description | Kerr Nelson |
| Cooling Type | Water-cooled |
| Function | Cooler, exhaust gas recirculation |
| Connector Shape | Rectangular |
| Number of Poles | 2 -pin connector |
| Operating Mode | Pneumatic |
| Material | Metal |
| Additional Information | without gasket / seal |
| Weight | 7 kg |
| Type | Cooler, exhaust gas recirculation |
Important compatibility info
| Net weight | 6 kg |
| Extra Description | Kerr Nelson |
| Cooling Type | Water-cooled |
| Function | Cooler, exhaust gas recirculation |
| Connector Shape | Rectangular |
| Number of Poles | 2 -pin connector |
| Operating Mode | Pneumatic |
| Material | Metal |
| Additional Information | without gasket / seal |
| Weight | 7 kg |
| Type | Cooler, exhaust gas recirculation |
Important compatibility info
| Additional Information 2 | with screw set |
| Outer diameter | 294 mm |
| Engine Version | for engines with dual-mass flywheel |
| Weight | 15.36 kg |
| Number of mounting bores | 6 |
| for flywheel depth | 79 mm |
| Type | Flywheel |
| Function | Flywheel |
| Extra Description | DUAL MASS FLYWHEEL |
| Tightening Torque | 105 Nm |
Important compatibility info
| Additional Information 2 | with screw set |
| Outer diameter | 294 mm |
| Engine Version | for engines with dual-mass flywheel |
| Weight | 15.36 kg |
| Number of mounting bores | 6 |
| for flywheel depth | 79 mm |
| Type | Flywheel |
| Function | Flywheel |
| Extra Description | DUAL MASS FLYWHEEL |
| Tightening Torque | 105 Nm |
Important compatibility info
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of mounting bores | 10 |
| Extra Description | LuK RepSet DMF |
| Additional Information | with central slave cylinder |
| Additional Information 2 | with flywheel, with screw set |
Additional Information
- 1x LuK Screw Set, flywheel (411012510)
- 1x LuK Flywheel (415016310)
- 1x LuK Clutch Kit (623311333)
Important compatibility info
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of mounting bores | 10 |
| Extra Description | LuK RepSet DMF |
| Additional Information | with central slave cylinder |
| Additional Information 2 | with flywheel, with screw set |
Additional Information
- 1x LuK Screw Set, flywheel (411012510)
- 1x LuK Flywheel (415016310)
- 1x LuK Clutch Kit (623311333)
Important compatibility info
| Manufacturer Restriction | Bosch |
| Function | Nozzle and Holder Assembly |
| Type | Nozzle and Holder Assembly |
| Number of Inlets / Outlets | 3 |
| Net weight | 0.522 kg |
| Housing Colour | black/grey |
Important compatibility info
| Manufacturer Restriction | Bosch |
| Function | Nozzle and Holder Assembly |
| Type | Nozzle and Holder Assembly |
| Number of Inlets / Outlets | 3 |
| Net weight | 0.522 kg |
| Housing Colour | black/grey |
Important compatibility info
Important compatibility info
| Function | Ignition Cable Kit |
| Ignition Cable | Connector Type SAE, Resistive Ignition Cable |
| for pipe diameter | 7 mm |
| Distributor/ Rotor | Connector Type DIN |
| Ignition Coil | Connector Type DIN |
| Length 2 | 630 mm |
| Cable Length | 275 mm. 385 mm. 515 mm. 525 mm. 630 mm. 635 mm. 680 mm. 790 mm |
| Quantity | 10 |
| Length 1 | 425 mm |
| Net weight | 0.756 kg |
| Type | Ignition Cable Kit |
| Extra Description | Lucas Premium Blade |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023























