Important compatibility info
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Type | Camshaft Adjuster |
| Number of Teeth | 42. 70 |
| Placement on Vehicle | Intake Side, Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Water Pump, engine cooling |
| Operating Mode | Electric |
| Number of Inlets / Outlets | 2 |
| Plug Type | Male |
| Function | Water Pump, engine cooling |
| Number of Pins | 3 |
| Pin Shape | Flat |
| Additional Information 2 | with clip |
| Extra Description | ThermalPro™ |
Important compatibility info
| Type | Water Pump, engine cooling |
| Operating Mode | Electric |
| Number of Inlets / Outlets | 2 |
| Plug Type | Male |
| Function | Water Pump, engine cooling |
| Number of Pins | 3 |
| Pin Shape | Flat |
| Additional Information 2 | with clip |
| Extra Description | ThermalPro™ |
Important compatibility info
| Number of Inlets / Outlets | 3 |
| Bolt Hole Circle Diameter | 90 mm |
| Number of Wings | 12 |
| Height | 90 mm |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
Important compatibility info
| Additional Information 2 | with seal ring |
| Fuel Mixture Formation | Common Rail (CR) |
| Function | Injector Nozzle |
| Type | Injector Nozzle |
Important compatibility info
| Additional Information 2 | with seal ring |
| Fuel Mixture Formation | Common Rail (CR) |
| Function | Injector Nozzle |
| Type | Injector Nozzle |
Important compatibility info
| Replaced by | RO205L |
| Function | Drive Shaft |
| Type | Drive Shaft |
Important compatibility info
| Replaced by | RO205L |
| Function | Drive Shaft |
| Type | Drive Shaft |
Important compatibility info
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Width | 47 mm |
| Outer diameter | 166 mm |
| Number of grooves | 7 |
Important compatibility info
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Width | 47 mm |
| Outer diameter | 166 mm |
| Number of grooves | 7 |
Important compatibility info
| Voltage | 14 V |
| Alternator Charge Current | 140 A |
| Belt Pulley Diameter | 52.2 mm |
| Number of grooves | 6 |
| Alternator type | excl. vacuum pump |
| Fastening Type | Double Pivot Lever |
| Function | Alternator |
| Rotation Direction | Clockwise rotation |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Distance from pulley to alternator | 30 mm |
| Type | Alternator |
| Clamp | B+(M8) |
| Length | 202 mm |
| Pulleys | with multi-belt pulley |
| Plug Type ID | 125 |
Important compatibility info
| Voltage | 14 V |
| Alternator Charge Current | 140 A |
| Belt Pulley Diameter | 52.2 mm |
| Number of grooves | 6 |
| Alternator type | excl. vacuum pump |
| Fastening Type | Double Pivot Lever |
| Function | Alternator |
| Rotation Direction | Clockwise rotation |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Distance from pulley to alternator | 30 mm |
| Type | Alternator |
| Clamp | B+(M8) |
| Length | 202 mm |
| Pulleys | with multi-belt pulley |
| Plug Type ID | 125 |
Important compatibility info
| Housing Colour | Black |
| Weight | 0.059 kg |
| Number of Poles | 3 -pin connector |
| Number of Inlets / Outlets | 1 |
| Type | Sensor, fuel pressure |
| Function | Sensor, fuel pressure |
| Net weight | 0.052 kg |
Important compatibility info
| Housing Colour | Black |
| Weight | 0.059 kg |
| Number of Poles | 3 -pin connector |
| Number of Inlets / Outlets | 1 |
| Type | Sensor, fuel pressure |
| Function | Sensor, fuel pressure |
| Net weight | 0.052 kg |
Important compatibility info
| Placement on Vehicle | for cylinder 4-6 |
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| To be used with part number(s) | FK91628 |
| Inspection Tag | E9-103R |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Product met | Euro 3 |
| Material | Ceramic |
Important compatibility info
| Placement on Vehicle | for cylinder 4-6 |
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| To be used with part number(s) | FK91628 |
| Inspection Tag | E9-103R |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Product met | Euro 3 |
| Material | Ceramic |
Important compatibility info
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 105 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Function | Alternator |
| Distance from pulley to alternator | 113 mm |
| Clamp | B+(M8),D+(M5) |
| Fastening Type | Single pivoted lever |
| Number of grooves | 6 |
| Belt Pulley Diameter | 61.5 mm |
| Rotation Direction | Clockwise rotation |
| Length | 185 mm |
| Voltage | 14 V |
| Type | Alternator |
Important compatibility info
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 105 A |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Alternator type | excl. vacuum pump |
| Function | Alternator |
| Distance from pulley to alternator | 113 mm |
| Clamp | B+(M8),D+(M5) |
| Fastening Type | Single pivoted lever |
| Number of grooves | 6 |
| Belt Pulley Diameter | 61.5 mm |
| Rotation Direction | Clockwise rotation |
| Length | 185 mm |
| Voltage | 14 V |
| Type | Alternator |
Important compatibility info
| Extra Description | Non-approved |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Placement on Vehicle | for cylinder 4-6 |
| Material | Ceramic |
| To be used with part number(s) | FK91628 |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Extra Description | Non-approved |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Placement on Vehicle | for cylinder 4-6 |
| Material | Ceramic |
| To be used with part number(s) | FK91628 |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Type | Starter |
| Bore Diameter | 8.5 mm |
| Voltage | 12 V |
| Position / Degree | rechts ° |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.2 kW |
| Length | 210 mm |
| Flange Diameter | 66 mm |
| Number of mounting bores | 3 |
| Bore Diameter 2 | 8.5 mm |
| Jaw opening angle measurement [Degree] | 143 ° |
| Fastening hole angle measurement [Degree] | 41 ° |
| Function | Starter |
| Bore Diameter 3 | 8.5 mm |
| Starter Type | Self-supporting |
| Pinion Rest Position | 0.5 mm |
| Connecting Angle | 41 ° |
| Clamp | 30,50 |
Important compatibility info
| Type | Starter |
| Bore Diameter | 8.5 mm |
| Voltage | 12 V |
| Position / Degree | rechts ° |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.2 kW |
| Length | 210 mm |
| Flange Diameter | 66 mm |
| Number of mounting bores | 3 |
| Bore Diameter 2 | 8.5 mm |
| Jaw opening angle measurement [Degree] | 143 ° |
| Fastening hole angle measurement [Degree] | 41 ° |
| Function | Starter |
| Bore Diameter 3 | 8.5 mm |
| Starter Type | Self-supporting |
| Pinion Rest Position | 0.5 mm |
| Connecting Angle | 41 ° |
| Clamp | 30,50 |
Important compatibility info
| Voltage | 12 V |
| Fastening hole angle measurement [Degree] | 47 ° |
| Starter Type | Floating pinion |
| Bore Diameter 2 | 12.5 mm |
| Pinion Rest Position | 52.1 mm |
| Connecting Angle | 47 ° |
| Clamp | 30,50 |
| Position / Degree | links ° |
| Flange Diameter | 79 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Anticlockwise rotation |
| Bore Diameter | 12.5 mm |
| Number of Teeth | 13 |
| Length | 254 mm |
| Rated Power | 2 kW |
| Function | Starter |
| Type | Starter |
Important compatibility info
| Voltage | 12 V |
| Fastening hole angle measurement [Degree] | 47 ° |
| Starter Type | Floating pinion |
| Bore Diameter 2 | 12.5 mm |
| Pinion Rest Position | 52.1 mm |
| Connecting Angle | 47 ° |
| Clamp | 30,50 |
| Position / Degree | links ° |
| Flange Diameter | 79 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Anticlockwise rotation |
| Bore Diameter | 12.5 mm |
| Number of Teeth | 13 |
| Length | 254 mm |
| Rated Power | 2 kW |
| Function | Starter |
| Type | Starter |
Important compatibility info
| Friction Lining Outer Diameter | 240 mm |
| Number of Teeth | 23 |
| Hub Profile | 23,3x26,3 |
| Function | Clutch Kit |
| Extra Description | 3-1 Kit |
| Additional Information | without central slave cylinder |
| Type | Clutch Kit |
Additional Information
- 1x Quinton Hazell Clutch Kit (QKT2848AF)
Important compatibility info
| Friction Lining Outer Diameter | 240 mm |
| Number of Teeth | 23 |
| Hub Profile | 23,3x26,3 |
| Function | Clutch Kit |
| Extra Description | 3-1 Kit |
| Additional Information | without central slave cylinder |
| Type | Clutch Kit |
Additional Information
- 1x Quinton Hazell Clutch Kit (QKT2848AF)
Important compatibility info
| Additional Information | with gasket/seal |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Fuel Type | Diesel |
| Type | Injector Nozzle |
| Part number of recommended accessories | A2C59514036 |
| Function | Injector Nozzle |
Important compatibility info
| Additional Information | with gasket/seal |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Fuel Type | Diesel |
| Type | Injector Nozzle |
| Part number of recommended accessories | A2C59514036 |
| Function | Injector Nozzle |
Important compatibility info
| PHCA (5 sec) | 1200 A |
| Length | 198 mm |
| BCI Group | 26R |
| Marine Cranking Amperage (MCA) | 725 A |
| Voltage | 12 V |
| Battery Type Code | PC1200 |
| Battery Capacity 100h (Ah) | 48 Ah |
| Type | AGM |
| Height | 180 mm |
| Ampere-Hours | 44 A |
| Terminal Type | Female Thread |
| Battery Capacity 5h (Ah) | 35 Ah |
| Cold Cranking Amperage (CCA) | 560 A |
| Terminal Layout | Positive Front Right |
| Width | 166 mm |
| Weight | 15100 |
| Warranty | 2 year warranty |
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138. 62 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| for OE number | L3K9-12-201A S2 |
| Extra Description | Standard Medium Kit |
| Chain pitch | 8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49713)
- 1x Febi Tensioner, timing chain (170098)
- 1x Febi Guide, timing chain (170101)
- 1x Febi Guide, timing chain (170103)
- 1x Febi Chain, oil pump drive (49777)
- 1x Febi Gear/Sprocket, camshaft (170108)
- 1x Febi Gear Set, oil pump (170113)
- 1x Febi Shaft Seal, crankshaft (107668)
- 1x Febi Chain Tensioner, oil pump drive (170121)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















