Important compatibility info
| Additional Information | with electric motor |
| Voltage | 24 V |
| Operating Mode | Electric |
| Combi Switch Function | without comfort function |
| Type | Window Regulator |
| Function | Window Regulator |
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Additional Information 2 | with grooves |
| Width | 40 mm |
| Outer diameter | 71.8 mm |
| Number of grooves | 10 |
| Extra Description | FleetRunner™ |
| Type | Belt Tensioner, v-ribbed belt |
| Material | Metal |
Additional Information
- 3x Gates Bolt (Z80817)
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Additional Information 2 | with grooves |
| Width | 40 mm |
| Outer diameter | 71.8 mm |
| Number of grooves | 10 |
| Extra Description | FleetRunner™ |
| Type | Belt Tensioner, v-ribbed belt |
| Material | Metal |
Additional Information
- 3x Gates Bolt (Z80817)
Important compatibility info
| Diameter | 240 mm |
| Function | Clutch Kit |
| Extra Description | LuK RepSet |
| Type | Clutch Kit |
| Additional Information 2 | with clutch release bearing |
Additional Information
- 1x LuK Clutch Pressure Plate (124018210)
- 1x LuK Clutch Disc (324014210)
- 1x LuK Clutch Release Bearing (500063760)
Important compatibility info
| Diameter | 240 mm |
| Function | Clutch Kit |
| Extra Description | LuK RepSet |
| Type | Clutch Kit |
| Additional Information 2 | with clutch release bearing |
Additional Information
- 1x LuK Clutch Pressure Plate (124018210)
- 1x LuK Clutch Disc (324014210)
- 1x LuK Clutch Release Bearing (500063760)
Important compatibility info
| Function | Headlight |
| Placement on Vehicle | Right |
| Additional Information 2 | with motor for headlamp levelling |
| Paired article numbers | VG0364924 |
| Bulb Type | H7/H7 |
| Housing Colour | Chrome |
| Type | Headlight |
| Manufacturer Restriction | Typ A.I. |
| Extra Description | TYC |
Important compatibility info
| Function | Headlight |
| Placement on Vehicle | Right |
| Additional Information 2 | with motor for headlamp levelling |
| Paired article numbers | VG0364924 |
| Bulb Type | H7/H7 |
| Housing Colour | Chrome |
| Type | Headlight |
| Manufacturer Restriction | Typ A.I. |
| Extra Description | TYC |
Important compatibility info
| Function | Gasket Kit, cylinder head |
| Type | Gasket Kit, cylinder head |
Important compatibility info
| Function | Gasket Kit, cylinder head |
| Type | Gasket Kit, cylinder head |
Important compatibility info
| Length | 550 mm |
| External Teeth, Wheel Side | 29 |
| Number of Teeth, ABS ring | 44 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Replaces | NI191R |
| Transmission-side joint diameter | 130 mm |
| Braking / Drive Dynamics | for vehicles with ABS |
Important compatibility info
| Length | 550 mm |
| External Teeth, Wheel Side | 29 |
| Number of Teeth, ABS ring | 44 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Replaces | NI191R |
| Transmission-side joint diameter | 130 mm |
| Braking / Drive Dynamics | for vehicles with ABS |
Important compatibility info
| Includes fitting kit | FK91350B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| Placement on Vehicle | for cylinder 4-6 |
| To be used with part number(s) | FK91350 |
| Product met | Euro 4 |
| Material | Ceramic |
Important compatibility info
| Includes fitting kit | FK91350B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| Placement on Vehicle | for cylinder 4-6 |
| To be used with part number(s) | FK91350 |
| Product met | Euro 4 |
| Material | Ceramic |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 18 |
| Alternator Charge Current | 180 A |
| Belt Pulley Diameter | 62 mm |
| Clamp | B+(M8) |
| Function | Alternator |
| Type | Alternator |
| for OE number | 124625018 |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 18 |
| Alternator Charge Current | 180 A |
| Belt Pulley Diameter | 62 mm |
| Clamp | B+(M8) |
| Function | Alternator |
| Type | Alternator |
| for OE number | 124625018 |
Important compatibility info
| Operating Mode | Mechanical |
| Housing material | Plastic |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with thermostat, with coolant regulator |
| Additional Information | with gasket/seal, with temperature sensor |
| for OE number | 06H 121 026 DR |
Important compatibility info
| Operating Mode | Mechanical |
| Housing material | Plastic |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with thermostat, with coolant regulator |
| Additional Information | with gasket/seal, with temperature sensor |
| for OE number | 06H 121 026 DR |
Important compatibility info
| Number of Ribs | 6 |
| Type | Alternator |
| Belt Pulley Diameter | 53 mm |
| Alternator Charge Current | 115 A |
| Voltage | 12 V |
| Manufacturer Restriction | Mitsubishi |
| Function | Alternator |
| Pulleys | with freewheel belt pulley |
| Manufacturer | CHRYSLER DODGE JEEP |
| Model | AVENGER CALIBER PATRIOT SEBRING |
| Length | 2090 mm |
| Height | 1801 mm |
Important compatibility info
| Number of Ribs | 6 |
| Type | Alternator |
| Belt Pulley Diameter | 53 mm |
| Alternator Charge Current | 115 A |
| Voltage | 12 V |
| Manufacturer Restriction | Mitsubishi |
| Function | Alternator |
| Pulleys | with freewheel belt pulley |
| Manufacturer | CHRYSLER DODGE JEEP |
| Model | AVENGER CALIBER PATRIOT SEBRING |
| Length | 2090 mm |
| Height | 1801 mm |
Important compatibility info
| Includes fitting kit | FK91402B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| Placement on Vehicle | Front |
| Product met | Euro 3 |
| To be used with part number(s) | FK91402 |
| Material | Ceramic |
Important compatibility info
| Includes fitting kit | FK91402B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| Placement on Vehicle | Front |
| Product met | Euro 3 |
| To be used with part number(s) | FK91402 |
| Material | Ceramic |
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Width 1 | 28 mm |
| Number of Teeth 1 | 155 |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x INA Tensioner Pulley, timing belt (531092710)
- 1x INA Deflection Pulley/Guide Pulley, timing belt (532088810)
- 1x INA Deflection Pulley/Guide Pulley, timing belt (532099910)
- 1x INA Water Pump, engine cooling (538080810)
- 1x INA Timing Belt (536044210)
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Width 1 | 28 mm |
| Number of Teeth 1 | 155 |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x INA Tensioner Pulley, timing belt (531092710)
- 1x INA Deflection Pulley/Guide Pulley, timing belt (532088810)
- 1x INA Deflection Pulley/Guide Pulley, timing belt (532099910)
- 1x INA Water Pump, engine cooling (538080810)
- 1x INA Timing Belt (536044210)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Monotube |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Function | Shock Absorber |
| Extra Description | Gas A Just |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Monotube |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Function | Shock Absorber |
| Extra Description | Gas A Just |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Important compatibility info
| Material | Aluminium |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Radiator type | Brazed cooling fins |
| Core Length | 900 mm |
| Core Width | 464 mm |
| Core Depth | 26 mm |
Important compatibility info
| Material | Aluminium |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Radiator type | Brazed cooling fins |
| Core Length | 900 mm |
| Core Width | 464 mm |
| Core Depth | 26 mm |
Important compatibility info
| Function | Drive Shaft |
| External Teeth, Wheel Side | 42 |
| Length | 504 mm |
| Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1322)
Important compatibility info
| Function | Drive Shaft |
| External Teeth, Wheel Side | 42 |
| Length | 504 mm |
| Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1322)
Important compatibility info
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 42 |
| Length | 464 mm |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1396)
Important compatibility info
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 42 |
| Length | 464 mm |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1396)
Important compatibility info
| Vehicle Equipment | for vehicles with lane changing assist |
| Type | Control Unit, lane changing assist |
| Function | Control Unit, lane changing assist |
| Additional Information 2 | Slave Control Unit, Activation required |
| Placement on Vehicle | Left Rear |
Additional Information
Brief Information
*** HELLA Electronics OE competence for over 60 years.
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Width 1 | 30 mm |
| Number of Teeth 1 | 120 |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x INA Tensioner Pulley, timing belt (531039620)
- 1x INA Deflection Pulley/Guide Pulley, timing belt (532019710)
- 1x INA Vibration Damper, timing belt (533003910)
- 1x INA Water Pump, engine cooling (538008910)
- 1x INA Timing Belt (536026210)
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Width 1 | 30 mm |
| Number of Teeth 1 | 120 |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x INA Tensioner Pulley, timing belt (531039620)
- 1x INA Deflection Pulley/Guide Pulley, timing belt (532019710)
- 1x INA Vibration Damper, timing belt (533003910)
- 1x INA Water Pump, engine cooling (538008910)
- 1x INA Timing Belt (536026210)
Important compatibility info
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Rim Hole Number | 5 -Hole |
| Flange Diameter | 154 mm |
| Additional Information 2 | with integrated ABS sensor |
| Placement on Vehicle | Front Axle Left |
| Part number of the recommended special tools | VKN 604 |
Additional Information
- 1x SKF Bearing (SKF01480)
- 1x SKF Assortment, fasteners (SKF02648)
Important compatibility info
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Rim Hole Number | 5 -Hole |
| Flange Diameter | 154 mm |
| Additional Information 2 | with integrated ABS sensor |
| Placement on Vehicle | Front Axle Left |
| Part number of the recommended special tools | VKN 604 |
Additional Information
- 1x SKF Bearing (SKF01480)
- 1x SKF Assortment, fasteners (SKF02648)
Important compatibility info
| Diameter | 240 mm |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Extra Description | LuK SAC |
| Type | Clutch Kit |
Additional Information
- 1x LuK Clutch Pressure Plate (124057610)
- 1x LuK Clutch Disc (324063010)
Important compatibility info
| Diameter | 240 mm |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Extra Description | LuK SAC |
| Type | Clutch Kit |
Additional Information
- 1x LuK Clutch Pressure Plate (124057610)
- 1x LuK Clutch Disc (324063010)
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information 2 | with motor for headlamp levelling, with bulbs |
| Voltage | 12 V |
| Paired article numbers | 1LG 010 741-101 |
| Bulb Type | H6W, PY21W, W21W, H7/H7 |
| Light Function | with position light, with high beam, with low beam, with daytime running light, with indicator |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Light Design | Halogen, FF |
| Number of light functions | 5 |
| Registration Type | ECE approved |
| Country Version | Europe |
| Type | Headlight |
| Function | Headlight |
| without lettering | BMW |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GA006841-121)
- 2x Hella Bulb (8GH007157-121)
- 1x Hella Bulb (8GH007643-121)
- 1x Hella Bulb (8GA008892-002)
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information 2 | with motor for headlamp levelling, with bulbs |
| Voltage | 12 V |
| Paired article numbers | 1LG 010 741-101 |
| Bulb Type | H6W, PY21W, W21W, H7/H7 |
| Light Function | with position light, with high beam, with low beam, with daytime running light, with indicator |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Light Design | Halogen, FF |
| Number of light functions | 5 |
| Registration Type | ECE approved |
| Country Version | Europe |
| Type | Headlight |
| Function | Headlight |
| without lettering | BMW |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GA006841-121)
- 2x Hella Bulb (8GH007157-121)
- 1x Hella Bulb (8GH007643-121)
- 1x Hella Bulb (8GA008892-002)
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Additional Information | with water pump |
| Extra Description | PowerGrip™ |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5645XS)
- 1x Gates Tensioner Pulley, timing belt (T43218)
- 1x Gates Water Pump, engine cooling (WP0205)
- 1x Gates Plug, rocker arm shaft mounting bore (Z80706)
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Additional Information | with water pump |
| Extra Description | PowerGrip™ |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5645XS)
- 1x Gates Tensioner Pulley, timing belt (T43218)
- 1x Gates Water Pump, engine cooling (WP0205)
- 1x Gates Plug, rocker arm shaft mounting bore (Z80706)
Important compatibility info
| Weight | 0.986 kg |
| Net weight | 0.836 kg |
| Plug Type | Female |
| Function | High-pressure Pump |
| Housing Colour | Grey |
| Number of Poles | 2 -pin connector |
| Number of Inlets / Outlets | 2 |
| Type | High-pressure Pump |
Important compatibility info
| Weight | 0.986 kg |
| Net weight | 0.836 kg |
| Plug Type | Female |
| Function | High-pressure Pump |
| Housing Colour | Grey |
| Number of Poles | 2 -pin connector |
| Number of Inlets / Outlets | 2 |
| Type | High-pressure Pump |
Important compatibility info
| Manufacturer Restriction | Bosch |
| Function | Nozzle and Holder Assembly |
| Additional Information 2 | without sensor |
| Net weight | 0.254 kg |
| Number of Inlets / Outlets | 2 |
| Type | Nozzle and Holder Assembly |
Important compatibility info
| Manufacturer Restriction | Bosch |
| Function | Nozzle and Holder Assembly |
| Additional Information 2 | without sensor |
| Net weight | 0.254 kg |
| Number of Inlets / Outlets | 2 |
| Type | Nozzle and Holder Assembly |
Important compatibility info
| Diameter | 240 mm |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Additional Information 2 | with clutch release bearing |
| Extra Description | LuK SAC |
| Type | Clutch Kit |
Additional Information
- 1x LuK Clutch Pressure Plate (124050910)
- 1x LuK Clutch Disc (324037110)
- 1x LuK Clutch Release Bearing (500105010)
Important compatibility info
| Diameter | 240 mm |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Additional Information 2 | with clutch release bearing |
| Extra Description | LuK SAC |
| Type | Clutch Kit |
Additional Information
- 1x LuK Clutch Pressure Plate (124050910)
- 1x LuK Clutch Disc (324037110)
- 1x LuK Clutch Release Bearing (500105010)
Important compatibility info
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Inspection Tag | E57-103R |
| To be used with part number(s) | FK91990 |
| Product met | Euro 5 |
| Type | Catalytic Converter |
| Placement on Vehicle | Front |
| Material | Ceramic |
Important compatibility info
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Inspection Tag | E57-103R |
| To be used with part number(s) | FK91990 |
| Product met | Euro 5 |
| Type | Catalytic Converter |
| Placement on Vehicle | Front |
| Material | Ceramic |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
























