Important compatibility info
| Width | 125 mm |
| Thickness | 90 mm |
| Function | Repair Kit, air compressor |
| Length | 230 mm |
| Additional Information 2 | with spacer plate |
| Type | Repair Kit, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 596 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 815 mm |
| Material | Cast Steel |
| Additional Information 2 | with crown nut |
| Spanner Size | 17 |
| Placement on Vehicle | Front Axle, Centre |
| External Thread Size | M12 x 1,25 |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 32 mm |
| Cone Size | 15.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 55 mm |
| Type | Alternator |
| Voltage | 12 V |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 479 mm |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
| Height | 169 mm |
| Width | 296 mm |
| Material | Plastic |
| Colour | Black |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Trailing Arm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | both sides |
| Length | 625 mm |
| Hole Spacing | 115 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Ring (40687)
- 1x Febi Urea Filter (100593)
- 1x Febi Fuel filter (28068)
- 1x Febi Fuel filter (47974)
- 1x Febi Air Filter (30443)
- 1x Febi Oil Filter (45320)
- 1x Febi Filter, cabin air (18759)
- 1x Febi Fuel filter (31397)
- 1x Febi Air Dryer Cartridge, compressed-air system (34322)
Important compatibility info
| Number of mounting bores | 4 |
| Bolt Hole Circle Diameter | 110.5 mm |
| Placement on Vehicle | Front Axle Right |
| Min. Length | 538 mm |
| Wheel Sided Joint Diameter | 88.90 mm |
| Transmission-side joint diameter | 79 mm |
| Bore Diameter | 10.9 mm |
| External Teeth, Wheel Side | 28 |
| Function | Drive Shaft |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 30 mm |
| Rod/Strut | Push Rod |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Thread Size | M24 x 1,5 |
| Placement on Vehicle | Front Axle |
| Pipe Diameter | 44 mm |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable on one side |
| Additional Information | with nuts |
| Brake Type | Drum Brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Alternator |
| Function | Alternator |
| Voltage | 12 V |
| Belt Pulley Diameter | 55 mm |
| Alternator Charge Current | 120 A |
| Pulleys | with belt pulley |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 52 mm |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Function | Centre Rod Assembly |
| Length | 1059 mm |
| Type | Centre Rod Assembly |
| Placement on Vehicle | Front Axle |
| Thread Size | M30 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with screw |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 113.85 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 38 |
| Number of mounting bores | 6 |
| Number of Teeth, ABS ring | 45 |
| Min. Length | 551 mm |
| ABS Ring Diameter | 81 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
| Placement on Vehicle | Front Axle |
| Length | 566 mm |
| Steering arm type | Trailing Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Automatic |
| Width of castor bearing surface | 32 mm |
| Function | Belt Tensioner, V-ribbed belt |
| Outer diameter | 75 mm |
| Material | Metal |
| Type | Belt Tensioner, V-ribbed belt |
| Quantity | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Number of Teeth | 133 |
| Surface | Coated |
| for OE number | 77 01 477 050 S3 |
| Width | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (26901)
- 1x Febi Water Pump, engine cooling (39459)
Important compatibility info
| Function | EGR valve, exhaust control |
| Internal Thread Size | M12 x 1,5, M14 x 1,5 |
| Valve type | Solenoid Valve |
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 3 |
| Type | EGR valve, exhaust control |
| Voltage | 24 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 184 |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (181686)
- 1x Febi Tensioner, timing chain (181600)
- 1x Febi Guide, timing chain (179384)
- 1x Febi Guide, timing chain (179395)
- 1x Febi Guide, timing chain (178591)
- 1x Febi Sprocket, crankshaft (181669)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Mounting points diameter | 12 mm. 14 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 659 mm |
| Min. Length | 404 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20044; 20346 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 659 mm |
| Min. Length | 430 mm |
| Pipe Diameter | 60 mm. 50 mm |
| Mounting points diameter | 24 mm. 20 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















