Important compatibility info
| Type | Mounting, stabiliser bar |
| Inner diameter | 17 mm |
| Thickness | 46 mm |
| Material | Rubber |
| Width | 48 mm |
| Length | 40 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 40 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
| Inner diameter | 20 mm |
| Thickness | 46 mm |
| Width | 48 mm |
| Material | Rubber |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided |
| Width | 11 mm |
| Material | FPM (fluoride rubber) |
| Outer diameter | 104 mm |
| Inner diameter | 90 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Fuel filter |
| Function | Fuel filter |
| Inner diameter | 60 mm |
| Internal Thread Size | M16 x 1,5 |
| Filter type | Spin-on Filter |
| Height | 158 mm |
| Outer diameter | 84 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Gasket outer diameter | 124.3 mm |
| Gasket inner diameter | 114.5 mm |
| Type | Oil Filter |
| Function | Oil Filter |
| Height | 196 mm |
| Outer diameter | 114 mm |
| Inner diameter | 57 mm |
| Filter type | Filter Insert |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Number of Ribs | 8 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1075 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1018 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 54 mm |
| Sealing lip material | FPM (fluoride rubber) |
| Width | 8 mm |
| Outer diameter | 68 mm |
| Placement on Vehicle | frontal sided |
| Type | Shaft Seal, crankshaft |
| Function | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (10823)
- 1x Febi Rolling Bearing, suspension strut support mount (10089)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 386 mm |
| Spanner Size | 14, 17 |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| External Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Paired article numbers | 19408 |
| Function | Ball Joint |
| Additional Information | with lock nut |
| Cone Size | 15 mm |
| Mounting points diameter | 8.5 mm |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with lock nut |
| Mounting points diameter | 8.5 mm |
| Paired article numbers | 19406 |
| Function | Ball Joint |
| Cone Size | 15.8 mm |
| External Thread Size | M12 x 1,5 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 210 mm |
| Material | Rubber |
| Inner diameter 1 | 13 mm |
| Inner diameter 2 | 62 mm |
| Function | Bellow Kit, steering |
| Additional Information 2 | with clamps |
| Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (23841)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (23842)
- 1x Febi Gasket, steering gear (23843)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 126 mm |
| Inner diameter | 11 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Suspension Strut Support Mount |
| Material | Rubber/Metal |
| Type | Suspension Strut Support Mount |
| Height | 57 mm |
| Outer diameter | 63 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston Diameter | 19 mm |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Paired article numbers | 09595 |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston Diameter | 19 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Paired article numbers | 09594 |
| Function | Wheel Brake Cylinder |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | Pollen Filter |
| Type | Filter Set, cabin air |
| Width | 196 mm |
| Length | 257.5 mm |
| Height | 37.5 mm |
| Function | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Wheel Brake Cylinder |
| Piston Diameter | 19.1 mm |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, only fitted on one side |
| Length | 1020 mm |
| Number of Connectors / Ports | 2 |
| Brake Type | Disc Brake |
| Function | Warning Contact, brake pad wear |
| Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Rear |
| Length | 1283 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















