Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 120 A |
| Type | Alternator |
| Manufacturer Restriction | Denso |
| Function | Alternator |
Important compatibility info
| Packing Type | Barrel |
| Manufacturer Release | VW 504 00/507 00 |
| Oil - manufacturer recommendation | VW TL 52545 |
| Oil | Synthetic Oil |
| Type | Engine Oil |
| Function | Engine Oil |
| Extra Description | Carlube Triple R 0W-30 VW R-Tec 9 |
| SAE Viscosity | 0W-30 |
| Capacity | 20 l |
| Specification | ACEA C3-16, API |
Important compatibility info
| Packing Type | Barrel |
| Manufacturer Release | VW 504 00/507 00 |
| Oil - manufacturer recommendation | VW TL 52545 |
| Oil | Synthetic Oil |
| Type | Engine Oil |
| Function | Engine Oil |
| Extra Description | Carlube Triple R 0W-30 VW R-Tec 9 |
| SAE Viscosity | 0W-30 |
| Capacity | 20 l |
| Specification | ACEA C3-16, API |
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Number of Wings | 7 |
| Housing material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Number of Wings | 7 |
| Housing material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Function | Fuel Feed Unit |
| Type | Fuel Feed Unit |
| Additional Information | with fuel sender unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Function | Fuel Feed Unit |
| Type | Fuel Feed Unit |
| Additional Information | with fuel sender unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Title | M12 Sub Compact Rivet Tool Battery & Charger Not Included |
| Other Part Number | M12 BPRT-0 |
Additional Information
- Flexible battery system: works with all MILWAUKEE M12 batteries
- REDLITHIUM battery pack provides superior pack construction electronics and fade-free performance to deliver more run time and more work over pack life
- Rivets in one stroke with a 20.32 mm stroke length
- On board fuel gauge and LED light for added user convenience and illumination in low lit working conditions
- Tool-free access to easily clean jaws. On-board nose piece storage and removal tool for user convenience
- Integrated belt hook and lanyard tie off point
- Ergonomic design with 273 mm H x 66.8 mm W x 165 mm in length without mandrel collector
- Retention nose pieces hold rivets in any orientation
- Up to 325 x 4.8 mm stainless steel rivets on a single charge with a 2.0 Ah battery pack
- Supplied with 4 x retaining tips
- Suitable for all aluminium steel stainless steel and copper rivets up to 4.8 mm
Important compatibility info
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 27 |
| Function | Drive Shaft |
| Length | 810 mm |
| Inner Length | 75 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 27 |
| Function | Drive Shaft |
| Length | 810 mm |
| Inner Length | 75 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Battery Type Code | 019 AGM |
| Suitable for (starter battery) | with central degassing |
| Voltage | 12 V |
| Cold-test Current, EN | 850 A |
| Other Part Number | 595901085 |
| Terminal Layout | Positive Front Right |
| Cold Cranking Amperage (CCA) | 850 A |
| Function | Starter Battery |
| Extra Description | YBX9000 AGM Start Stop Plus Batteries |
| Hold-down Type | B03 |
| Type | Starter Battery |
| Terminal Type | T1 |
| Filled Weight | 25.6 kg |
| Battery | with handles, AGM Battery |
| Port / Connector type | T1 |
| Ampere-Hours | 95 Ah |
| Length | 353 mm |
| Height | 190 mm |
| Width | 175 mm |
| Key Words | 850A; 95Ah; 4Yr Warranty; 353x175x190 |
| Warranty | 4 year warranty |
Important compatibility info
| Battery Type Code | 019 AGM |
| Suitable for (starter battery) | with central degassing |
| Voltage | 12 V |
| Cold-test Current, EN | 850 A |
| Other Part Number | 595901085 |
| Terminal Layout | Positive Front Right |
| Cold Cranking Amperage (CCA) | 850 A |
| Function | Starter Battery |
| Extra Description | YBX9000 AGM Start Stop Plus Batteries |
| Hold-down Type | B03 |
| Type | Starter Battery |
| Terminal Type | T1 |
| Filled Weight | 25.6 kg |
| Battery | with handles, AGM Battery |
| Port / Connector type | T1 |
| Ampere-Hours | 95 Ah |
| Length | 353 mm |
| Height | 190 mm |
| Width | 175 mm |
| Key Words | 850A; 95Ah; 4Yr Warranty; 353x175x190 |
| Warranty | 4 year warranty |
Important compatibility info
| Type | Charge Air Cooler |
| Function | Charge Air Cooler |
| Radiator type | Brazed cooling fins |
| Core Length | 300 mm |
| Core Width | 161 mm |
| Core Depth | 85 mm |
| for OE number | 282712A740 |
| Cooling Type | air-cooled |
Important compatibility info
| Type | Charge Air Cooler |
| Function | Charge Air Cooler |
| Radiator type | Brazed cooling fins |
| Core Length | 300 mm |
| Core Width | 161 mm |
| Core Depth | 85 mm |
| for OE number | 282712A740 |
| Cooling Type | air-cooled |
Important compatibility info
| for OE number | 13568-39016 S6 |
| Water pump impeller material | Metal |
| Function | Water Pump & Timing Belt Kit |
| Number of Teeth | 97 |
| Type | Water Pump & Timing Belt Kit |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Timing Belt Kit (ADT37322)
- 1x Blue Print Water Pump, engine cooling (ADBP910003)
Important compatibility info
| for OE number | 13568-39016 S6 |
| Water pump impeller material | Metal |
| Function | Water Pump & Timing Belt Kit |
| Number of Teeth | 97 |
| Type | Water Pump & Timing Belt Kit |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Timing Belt Kit (ADT37322)
- 1x Blue Print Water Pump, engine cooling (ADBP910003)
Important compatibility info
| Paired article numbers | OP7174154 |
| Placement on Vehicle | Right |
| Additional Information | without bulb holder |
| Function | Tail Light Assembly |
| Type | Tail Light Assembly |
Important compatibility info
| Paired article numbers | OP7174154 |
| Placement on Vehicle | Right |
| Additional Information | without bulb holder |
| Function | Tail Light Assembly |
| Type | Tail Light Assembly |
Important compatibility info
| Diameter | 240 mm |
| Additional Information | with central slave cylinder |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510017210)
- 1x LuK Clutch Kit (624313609)
Important compatibility info
| Diameter | 240 mm |
| Additional Information | with central slave cylinder |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510017210)
- 1x LuK Clutch Kit (624313609)
Important compatibility info
| Type | Particle Sensor |
| Function | Particle Sensor |
Important compatibility info
| Type | Particle Sensor |
| Function | Particle Sensor |
Important compatibility info
| Function | Fuel Pump |
| Type | Fuel Pump |
Important compatibility info
| Function | Fuel Pump |
| Type | Fuel Pump |
Important compatibility info
| Additional Information 2 | with clutch release bearing |
| Outer diameter | 225 mm |
| Multi-piece | Three-piece |
| Function | Clutch Kit |
| Number of Teeth | 22 |
| Additional Information | with synthetic grease |
| Type | Clutch Kit |
| Replaces | ADG03067 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADG03235N)
- 1x Blue Print Clutch Disc (ADG03141)
- 1x Blue Print Clutch Release Bearing (ADG03311)
Important compatibility info
| Additional Information 2 | with clutch release bearing |
| Outer diameter | 225 mm |
| Multi-piece | Three-piece |
| Function | Clutch Kit |
| Number of Teeth | 22 |
| Additional Information | with synthetic grease |
| Type | Clutch Kit |
| Replaces | ADG03067 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADG03235N)
- 1x Blue Print Clutch Disc (ADG03141)
- 1x Blue Print Clutch Release Bearing (ADG03311)
Important compatibility info
| Number of grooves | 6 |
| Additional Information 2 | Belt Pulley pressed on |
| Operating Mode | Hydraulic |
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 120 mm |
| for steering manufacturer | TOYODA |
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
Important compatibility info
| Number of grooves | 6 |
| Additional Information 2 | Belt Pulley pressed on |
| Operating Mode | Hydraulic |
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 120 mm |
| for steering manufacturer | TOYODA |
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
Important compatibility info
| Function | Gasket Kit, cylinder head |
| Type | Gasket Kit, cylinder head |
Important compatibility info
| Function | Gasket Kit, cylinder head |
| Type | Gasket Kit, cylinder head |
Important compatibility info
| Function | Compressor, air conditioning |
| Manufacturer Restriction | GENUINE Halla HCC |
| Number of grooves | 5 |
| Compressor Oil | PAG 46 |
| Compressor ID | HS09 |
| Belt Pulley Diameter | 118 mm |
| Pulleys | with v-ribbed belt pulley |
| Additional Information 2 | with PAG compressor oil |
| Extra Description | GENUINE |
| Connector Shape | round |
| Voltage | 12 V |
| Type | Compressor, air conditioning |
| Oil Fill Quantity | 120 ml |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Function | Compressor, air conditioning |
| Manufacturer Restriction | GENUINE Halla HCC |
| Number of grooves | 5 |
| Compressor Oil | PAG 46 |
| Compressor ID | HS09 |
| Belt Pulley Diameter | 118 mm |
| Pulleys | with v-ribbed belt pulley |
| Additional Information 2 | with PAG compressor oil |
| Extra Description | GENUINE |
| Connector Shape | round |
| Voltage | 12 V |
| Type | Compressor, air conditioning |
| Oil Fill Quantity | 120 ml |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information 2 | with motor for headlamp levelling, without bulbs |
| Voltage | 12 V |
| Paired article numbers | 1LL 012 644-041 |
| Bulb Type | H4, PY21W |
| Light Function | with high beam, with low beam, with indicator, with position light (LED), with daytime running light (LED) |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Light Design | FF, Halogen |
| Number of light functions | 5 |
| Registration Type | ECE approved |
| Country Version | Europe |
| Type | Headlight |
| Function | Headlight |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Actuator, headlight levelling (6NM007878-541)
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information 2 | with motor for headlamp levelling, without bulbs |
| Voltage | 12 V |
| Paired article numbers | 1LL 012 644-041 |
| Bulb Type | H4, PY21W |
| Light Function | with high beam, with low beam, with indicator, with position light (LED), with daytime running light (LED) |
| Left-hand / Right-hand Traffic | for left-hand traffic |
| Light Design | FF, Halogen |
| Number of light functions | 5 |
| Registration Type | ECE approved |
| Country Version | Europe |
| Type | Headlight |
| Function | Headlight |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Actuator, headlight levelling (6NM007878-541)
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Function | Clutch Kit |
| Extra Description | 3-1 Kit |
| Additional Information 2 | with clutch release bearing |
| Number of Teeth | 10 |
| Hub Profile | 23,1x29,2 |
| Friction Lining Outer Diameter | 260 mm |
| Type | Clutch Kit |
Important compatibility info
| Function | Clutch Kit |
| Extra Description | 3-1 Kit |
| Additional Information 2 | with clutch release bearing |
| Number of Teeth | 10 |
| Hub Profile | 23,1x29,2 |
| Friction Lining Outer Diameter | 260 mm |
| Type | Clutch Kit |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 28 |
| Inner Length | 67 mm |
| Length | 635 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 28 |
| Inner Length | 67 mm |
| Length | 635 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
Important compatibility info
| To be used with part number(s) | FK91272 |
| Includes fitting kit | FK91272B |
| Extra Description | Non-approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| To be used with part number(s) | FK91272 |
| Includes fitting kit | FK91272B |
| Extra Description | Non-approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Additional Information 2 | with seal ring |
| Fuel Mixture Formation | Common Rail (CR) |
| Function | Injector Nozzle |
| Type | Injector Nozzle |
Important compatibility info
| Additional Information 2 | with seal ring |
| Fuel Mixture Formation | Common Rail (CR) |
| Function | Injector Nozzle |
| Type | Injector Nozzle |
Important compatibility info
| Quality | OE-EQUIVALENT |
| Function | Compressor, air conditioning |
| Manufacturer Restriction | VISTEON-EQUIVALENT |
| Number of grooves | 6 |
| Compressor Oil | PAG 46 YF |
| Compressor ID | VS16 |
| Outlet Diameter | 18 mm |
| Inlet Diameter | 20.5 mm |
| Belt Pulley Diameter | 108 mm |
| Additional Information 2 | with PAG compressor oil, with seal ring |
| Voltage | 12 V |
| Connector Shape | rectangular |
| Extra Description | EASY FIT |
| Oil Fill Quantity | 200 ml |
| Type | Compressor, air conditioning |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Quality | OE-EQUIVALENT |
| Function | Compressor, air conditioning |
| Manufacturer Restriction | VISTEON-EQUIVALENT |
| Number of grooves | 6 |
| Compressor Oil | PAG 46 YF |
| Compressor ID | VS16 |
| Outlet Diameter | 18 mm |
| Inlet Diameter | 20.5 mm |
| Belt Pulley Diameter | 108 mm |
| Additional Information 2 | with PAG compressor oil, with seal ring |
| Voltage | 12 V |
| Connector Shape | rectangular |
| Extra Description | EASY FIT |
| Oil Fill Quantity | 200 ml |
| Type | Compressor, air conditioning |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Function | Alternator |
| Alternator Charge Current | 145 A |
| Belt Pulley Diameter | 49 mm |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Type | Alternator |
| for OE number | 124525042 |
Important compatibility info
| Function | Alternator |
| Alternator Charge Current | 145 A |
| Belt Pulley Diameter | 49 mm |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Type | Alternator |
| for OE number | 124525042 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
























