Proud to be a UK-based company
Contact us
Important compatibility info
| Steering arm type | Trailing Arm |
| Rod/Strut | Push Rod |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle |
| Length | 539 mm |
| Pipe Diameter | 50 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.41
Important compatibility info
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Type | Mass Air Flow Sensor |
| for OE number | 059 906 461 Q |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.40
Important compatibility info
| Housing material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Seal Material | Paper, Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.38
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle, Rear Axle |
| External Thread Size | M16 x 1,5 |
| Shock Absorber Design | Telescopic Shock Absorber |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Piston conrod diameter | 16 mm |
| Pipe Diameter | 64 mm. 76 mm |
| Min. Length | 330 mm |
| Max. Length | 534 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.38
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
| Extra Description | febi Plus |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 722 mm |
| Function | Shock Absorber |
| Pipe Diameter | 64 mm. 75 mm |
| Mounting points diameter | 20 mm |
| Type | Shock Absorber |
| Min. Length | 476 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.37
Important compatibility info
| Placement on Vehicle | Right Front |
| Additional Information | with adjuster |
| Paired article numbers | 197194 |
| Number of Connectors / Ports | 6 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.37
Important compatibility info
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 662 mm |
| Min. Length | 402 mm |
| Pipe Diameter | 60 mm. 50 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.37
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 316 mm |
| Thickness | 56.5 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 58 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.29
Important compatibility info
| Additional Information | with piston |
| External Thread Size | M10 x 1,5, M16 x 1,5 |
| Placement on Vehicle | Front Axle |
| Outer diameter | 227 mm. 225 mm |
| Thickness | 223 mm. 531 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.26
Important compatibility info
| Function | Throttle body |
| Number of Connectors / Ports | 6 |
| Voltage | 12 V |
| Height | 84 mm |
| Operating Mode | Electric |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.25
Important compatibility info
| Length | 700 mm |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 50 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.19
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.10
Important compatibility info
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Pipe Diameter | 62 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M38 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.08
Important compatibility info
| Length | 1243 mm |
| Rod/Strut | Push Rod |
| Cone Size | 28.6 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.08
Important compatibility info
| Length | 580 mm |
| Material | Steel |
| Outer diameter | 396 mm |
| Number of Connectors / Ports | 4 |
| Capacity | 60 l |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Operating Pressure | 10 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£124.04
Important compatibility info
| Pressure side external thread size | M12 x 1,5 |
| Type | Door Lock, driver cab |
| Thickness | 35 mm |
| Width | 135.41 mm |
| Length | 87.03 mm |
| Placement on Vehicle | Rear |
| Function | Door Lock, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.98
Important compatibility info
| Width | 157 mm |
| Length | 178 mm |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Paired article numbers | 36749 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.95
Important compatibility info
| Adjustable | Adjustable on one side |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Extra Description | ProKit |
| Length | 1042 mm |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.94
Important compatibility info
| Housing material | Aluminium |
| Number of grooves | 8 |
| Number of Wings | 5 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.93
Important compatibility info
| Material | AEM (Ethylene Acrylate Rubber) |
| Type | Gasket Set, cylinder head cover |
| Function | Gasket Set, cylinder head cover |
| Number of screws | 18 |
| for OE number | 51.03905.0177 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.91
Important compatibility info
| Belts | with rounded tooth profile |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Width | 32 mm |
| Number of Teeth | 211 |
| Surface | Coated |
| for OE number | 13568-YZZ10 S2 |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (26845)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (26806)
- 1x Febi Tensioner Pulley, timing belt (26805)
- 1x Febi Tensioner, timing belt (174740)
£123.80
Important compatibility info
| Length | 110 mm |
| Width | 114 mm |
| Thickness | 100 mm |
| Type | Pump, fuel pre-supply |
| Function | Pump, fuel pre-supply |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.79
Important compatibility info
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Number of Connectors / Ports | 4 |
| Type | Mass Air Flow Sensor |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.79
Important compatibility info
| Number of Ribs | 6 |
| Function | Alternator |
| Alternator Charge Current | 75 A |
| Pulleys | with belt pulley |
| Voltage | 12 V |
| Type | Alternator |
| Belt Pulley Diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.79
Important compatibility info
| Height | 410 mm |
| Outer diameter | 325 mm |
| Inner diameter | 193 mm |
| Filter type | Filter Insert |
| Type | Air filter kit |
| Function | Air filter kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.73
Important compatibility info
| Number of Teeth | 133 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Width | 26 mm |
| Surface | Coated |
| for OE number | 82 01 038 625 S1 |
| Belts | with rounded tooth profile |
| Water pump impeller material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (43669)
- 1x Febi Water Pump, engine cooling (39459)
£123.71
Important compatibility info
| Function | Camshaft |
| Type | Camshaft |
| Placement on Vehicle | Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.71
Important compatibility info
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
| for turbocharger (art. no.) | 186669, 191913, 186706, 186767, 186892, 186785, 186789, 186876, 187114, 187017, 187242, 187234, 187322, 187414 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.70
Important compatibility info
| Function | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | Adjustable on both sides |
| Pipe Diameter | 46 mm |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.67
Important compatibility info
| Type | Oil Pump |
| Function | Oil Pump |
| for OE number | 03C 115 105 T |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£123.65
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023