Important compatibility info
| Width | 103 mm |
| Outer diameter | 155 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 5. 6 |
| Parameter | 6PK + 7PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Headlight |
| Function | Headlight |
Important compatibility info
| Type | Headlight |
| Function | Headlight |
Important compatibility info
| Alternator Charge Current | 150 A |
| Pulleys | with freewheel belt pulley |
| Plug Type ID | 0129 |
| Number of Ribs | 6 |
| Voltage | 14 V |
| Function | Alternator |
| Belt Pulley Diameter | 55 mm |
| Vehicle Main Current | for vehicles with 12V main current |
| Clamp | M8 B+, L-DFM |
| Type | Alternator |
| Bore Diameter 1 | 9 mm |
| Net weight | 7.41 kg |
Important compatibility info
| Alternator Charge Current | 150 A |
| Pulleys | with freewheel belt pulley |
| Plug Type ID | 0129 |
| Number of Ribs | 6 |
| Voltage | 14 V |
| Function | Alternator |
| Belt Pulley Diameter | 55 mm |
| Vehicle Main Current | for vehicles with 12V main current |
| Clamp | M8 B+, L-DFM |
| Type | Alternator |
| Bore Diameter 1 | 9 mm |
| Net weight | 7.41 kg |
Important compatibility info
| Operating Mode | Mechanical |
| Housing material | Plastic |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with thermostat, with coolant regulator |
| Additional Information | with gasket/seal, with temperature sensor |
| for OE number | 06H 121 026 DR |
Important compatibility info
| Operating Mode | Mechanical |
| Housing material | Plastic |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with thermostat, with coolant regulator |
| Additional Information | with gasket/seal, with temperature sensor |
| for OE number | 06H 121 026 DR |
Important compatibility info
| Alternator Charge Current | 140 A |
| Pulleys | without belt pulley |
| Voltage | 12 V |
| Type | Alternator |
| Function | Alternator |
| Number of Ribs | 6 |
| Manufacturer Restriction | Denso |
Important compatibility info
| Alternator Charge Current | 140 A |
| Pulleys | without belt pulley |
| Voltage | 12 V |
| Type | Alternator |
| Function | Alternator |
| Number of Ribs | 6 |
| Manufacturer Restriction | Denso |
Important compatibility info
| Extra Description | 3-1 Kit |
| Number of Teeth | 14 |
| Additional Information | with central slave cylinder |
| Friction Lining Outer Diameter | 240 mm |
| Hub Profile | 25,1 |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Replaces | QKT4109AF |
Additional Information
- 1x Quinton Hazell Central Slave Cylinder, clutch (CSC014)
Important compatibility info
| Extra Description | 3-1 Kit |
| Number of Teeth | 14 |
| Additional Information | with central slave cylinder |
| Friction Lining Outer Diameter | 240 mm |
| Hub Profile | 25,1 |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Replaces | QKT4109AF |
Additional Information
- 1x Quinton Hazell Central Slave Cylinder, clutch (CSC014)
Important compatibility info
| Function | Gasket Kit, cylinder head |
| Type | Gasket Kit, cylinder head |
| for OE number | 04112-46102 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket Kit, cylinder head |
| Type | Gasket Kit, cylinder head |
| for OE number | 04112-46102 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Parts | 3 -part |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 21 |
| Additional Information | with central slave cylinder |
Important compatibility info
| Number of Parts | 3 -part |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 21 |
| Additional Information | with central slave cylinder |
Important compatibility info
Important compatibility info
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 56 mm |
| Connector Shape | D Shape |
| Function | Alternator |
| Type | Alternator |
| Connector / Clamp | B+/L/DFM |
| Number of mounting bores | 4 |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 56 mm |
| Connector Shape | D Shape |
| Function | Alternator |
| Type | Alternator |
| Connector / Clamp | B+/L/DFM |
| Number of mounting bores | 4 |
Important compatibility info
| Number of Poles | 2 -pin connector |
| Housing Colour | Dark Blue |
| Connector Shape | rectangular |
| Type | Injector |
| Function | Injector |
Important compatibility info
| Number of Poles | 2 -pin connector |
| Housing Colour | Dark Blue |
| Connector Shape | rectangular |
| Type | Injector |
| Function | Injector |
Important compatibility info
| Function | Gasket Kit, cylinder head |
| Type | Gasket Kit, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket Kit, cylinder head |
| Type | Gasket Kit, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 294 mm |
| Type | Clutch Pressure Plate |
| Function | Clutch Pressure Plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 294 mm |
| Type | Clutch Pressure Plate |
| Function | Clutch Pressure Plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 657 mm |
| Internal Teeth, wheel side | 37 |
| External Teeth, Diff.Side | 41 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 657 mm |
| Internal Teeth, wheel side | 37 |
| External Teeth, Diff.Side | 41 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 999 mm |
| Internal Teeth, wheel side | 37 |
| External Teeth, Diff.Side | 41 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 999 mm |
| Internal Teeth, wheel side | 37 |
| External Teeth, Diff.Side | 41 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 642 mm |
| Internal Teeth, wheel side | 37 |
| External Teeth, Diff.Side | 42 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 642 mm |
| Internal Teeth, wheel side | 37 |
| External Teeth, Diff.Side | 42 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 985 mm |
| Internal Teeth, wheel side | 37 |
| External Teeth, Diff.Side | 42 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 985 mm |
| Internal Teeth, wheel side | 37 |
| External Teeth, Diff.Side | 42 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Number of Wings | 9 |
| Number of Seals | 3 |
| Type | Water Pump, engine cooling |
| Water Pump Pulley Diameter | 113 mm |
| Height | 122 mm |
| Number of Holes | 7 |
| Impeller Diameter | 112 mm |
| Function | Water Pump, engine cooling |
Important compatibility info
| Voltage | 24 V |
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 135 mm |
| Oil Fill Quantity | 200 ml |
| Number of grooves | 1 |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 135 mm |
| Oil Fill Quantity | 200 ml |
| Number of grooves | 1 |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Manufacturer Restriction | Bosch |
| Weight | 0.076 kg |
| Function | Mass Air Flow Sensor |
| Housing Type | without housing |
| Connector Shape | Rectangular |
| Number of Poles | 5 -pin connector |
| Additional Information 2 | with integrated air temperature sensor, Can only be fitted with original mounting |
| Replaces | 19477; 19476 |
| Type | Mass Air Flow Sensor |
| Net weight | 0.052 kg |
| Housing Colour | Black |
Important compatibility info
| Manufacturer Restriction | Bosch |
| Weight | 0.076 kg |
| Function | Mass Air Flow Sensor |
| Housing Type | without housing |
| Connector Shape | Rectangular |
| Number of Poles | 5 -pin connector |
| Additional Information 2 | with integrated air temperature sensor, Can only be fitted with original mounting |
| Replaces | 19477; 19476 |
| Type | Mass Air Flow Sensor |
| Net weight | 0.052 kg |
| Housing Colour | Black |
Important compatibility info
| Housing Colour | black/grey |
| Function | Nozzle and Holder Assembly |
| Manufacturer Restriction | Lucas |
| Type | Nozzle and Holder Assembly |
| Number of Inlets / Outlets | 3 |
| Net weight | 0.538 kg |
Important compatibility info
| Housing Colour | black/grey |
| Function | Nozzle and Holder Assembly |
| Manufacturer Restriction | Lucas |
| Type | Nozzle and Holder Assembly |
| Number of Inlets / Outlets | 3 |
| Net weight | 0.538 kg |
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Air Mass Sensor |
| Housing Type | without housing |
| Connector Shape | Rectangular |
| Number of Poles | 5 -pin connector |
| Additional Information 2 | with integrated air temperature sensor, Can only be fitted with original mounting |
| Weight | 0.4 kg |
| Type | Air Mass Sensor |
Important compatibility info
| Extra Description | Kerr Nelson |
| Function | Air Mass Sensor |
| Housing Type | without housing |
| Connector Shape | Rectangular |
| Number of Poles | 5 -pin connector |
| Additional Information 2 | with integrated air temperature sensor, Can only be fitted with original mounting |
| Weight | 0.4 kg |
| Type | Air Mass Sensor |
Important compatibility info
| Type | Hydraulic Pump, steering |
| Additional Information | without reservoir |
| Pressure | 90 bar |
| for steering manufacturer | Unisia |
| Rotation Direction | Clockwise rotation |
| Function | Hydraulic Pump, steering |
| Number of Ribs | 4 |
| Operating Mode | Hydraulic |
| Pulleys | without belt pulley |
| Belt Pulley Diameter | 112 mm |
| Number of grooves | 4 |
Important compatibility info
| Type | Hydraulic Pump, steering |
| Additional Information | without reservoir |
| Pressure | 90 bar |
| for steering manufacturer | Unisia |
| Rotation Direction | Clockwise rotation |
| Function | Hydraulic Pump, steering |
| Number of Ribs | 4 |
| Operating Mode | Hydraulic |
| Pulleys | without belt pulley |
| Belt Pulley Diameter | 112 mm |
| Number of grooves | 4 |
Important compatibility info
| Number of Teeth | 21 |
| Additional Information | without central slave cylinder |
| Extra Description | 2-1 Kit |
| Function | Clutch Kit |
| Hub Profile | 22,5 |
| Friction Lining Outer Diameter | 240 mm |
| Type | Clutch Kit |
Important compatibility info
| Number of Teeth | 21 |
| Additional Information | without central slave cylinder |
| Extra Description | 2-1 Kit |
| Function | Clutch Kit |
| Hub Profile | 22,5 |
| Friction Lining Outer Diameter | 240 mm |
| Type | Clutch Kit |
Important compatibility info
| Voltage | 12 V |
| Alternator Charge Current | 120 A |
| for OE number | 101210-1670 |
| Type | Alternator |
| Function | Alternator |
Important compatibility info
| Voltage | 12 V |
| Alternator Charge Current | 120 A |
| for OE number | 101210-1670 |
| Type | Alternator |
| Function | Alternator |
Important compatibility info
| for OE number | 0379.62 S1 |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 0379.62 S1 |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























