Important compatibility info
| Function | Ignition Cable Kit |
| Ignition Cable | Connector Type SAE, Resistive Ignition Cable |
| for pipe diameter | 7 mm |
| Distributor/ Rotor | Connector Type DIN |
| Ignition Coil | Connector Type DIN |
| Cable Length | 1020 mm. 1070 mm. 430 mm. 550 mm. 680 mm. 700 mm. 730 mm. 850 mm. 880 mm. 890 mm |
| Quantity | 13 |
| Length 1 | 520 mm |
| Technical Information Number | 1 DISTRIBUTOR |
| Type | Ignition Cable Kit |
Important compatibility info
| Function | Ignition Cable Kit |
| Ignition Cable | Connector Type SAE, Resistive Ignition Cable |
| for pipe diameter | 7 mm |
| Distributor/ Rotor | Connector Type DIN |
| Ignition Coil | Connector Type DIN |
| Cable Length | 1020 mm. 1070 mm. 430 mm. 550 mm. 680 mm. 700 mm. 730 mm. 850 mm. 880 mm. 890 mm |
| Quantity | 13 |
| Length 1 | 520 mm |
| Technical Information Number | 1 DISTRIBUTOR |
| Type | Ignition Cable Kit |
Important compatibility info
| Additional Information 2 | with screw set |
| Outer diameter | 294 mm |
| Engine Version | for engines with dual-mass flywheel |
| Weight | 15.36 kg |
| Number of mounting bores | 6 |
| for flywheel depth | 79 mm |
| Type | Flywheel |
| Function | Flywheel |
| Extra Description | DUAL MASS FLYWHEEL |
| Tightening Torque | 105 Nm |
Important compatibility info
| Additional Information 2 | with screw set |
| Outer diameter | 294 mm |
| Engine Version | for engines with dual-mass flywheel |
| Weight | 15.36 kg |
| Number of mounting bores | 6 |
| for flywheel depth | 79 mm |
| Type | Flywheel |
| Function | Flywheel |
| Extra Description | DUAL MASS FLYWHEEL |
| Tightening Torque | 105 Nm |
Important compatibility info
| Labels & Certifications | Euro 5 |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Labels & Certifications | Euro 5 |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Type | Flywheel |
| Clutch Type | for wet clutch |
| Extra Description | LuK DMF |
| Function | Flywheel |
| Number of mounting bores | 8 |
| Transmission Type | Dual-Clutch Transmission |
Important compatibility info
| Type | Flywheel |
| Clutch Type | for wet clutch |
| Extra Description | LuK DMF |
| Function | Flywheel |
| Number of mounting bores | 8 |
| Transmission Type | Dual-Clutch Transmission |
Important compatibility info
| Exhaust Emission Norm | Euro 5 |
| Additional Information | with control unit |
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit, motor-specific oil supply lines (feed/return) |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo NEW |
| Manufacturer | Garrett |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 36.1 mm |
| Outer diameter | 356 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 22 mm |
| Number of Holes | 5 |
| Minimum thickness | 20.5 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | XTRA LINE - Xtra |
| Rotor Style | perforated/vented |
Additional Information
Brief Information
PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.
General Information
The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 36.1 mm |
| Outer diameter | 356 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 22 mm |
| Number of Holes | 5 |
| Minimum thickness | 20.5 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | XTRA LINE - Xtra |
| Rotor Style | perforated/vented |
Additional Information
Brief Information
PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.
General Information
The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
Important compatibility info
| Additional Information | with oil supply line |
| Additional Information 2 | with mounting kit |
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo ProKit REMAN |
| Manufacturer | Garrett |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charger, charging (supercharged/turbocharged) (186712)
- 1x Febi Mounting Kit, charger (187913)
- 1x Febi Oil Line, charger (187915)
Important compatibility info
| Additional Information | with oil supply line |
| Additional Information 2 | with mounting kit |
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | BorgWarner Turbo ProKit NEW |
| Manufacturer | BorgWarner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charger, charging (supercharged/turbocharged) (187109)
- 1x Febi Mounting Kit, charger (191411)
- 1x Febi Oil Line, charger (187986)
Important compatibility info
| Additional Information 2 | with radiator fan shroud |
| Voltage | 12 V |
| Rated Power | 350 W |
| Heating / Cooling | Single Fan |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Important compatibility info
| Additional Information 2 | with radiator fan shroud |
| Voltage | 12 V |
| Rated Power | 350 W |
| Heating / Cooling | Single Fan |
| Type | Fan, engine cooling |
| Function | Fan, engine cooling |
Important compatibility info
| Material | Cordierite |
| Inspection Tag | E57-103 |
| Type | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Function | Soot/Particulate Filter, exhaust system |
| Extra Description | Approved |
| Suited for engine type | Petrol Engine |
| Labels & Certifications | Euro 6 |
| Includes fitting kit | FK15088A |
| Product met | Euro 6 |
| To be used with part number(s) | FK15088 |
Important compatibility info
| Material | Cordierite |
| Inspection Tag | E57-103 |
| Type | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Function | Soot/Particulate Filter, exhaust system |
| Extra Description | Approved |
| Suited for engine type | Petrol Engine |
| Labels & Certifications | Euro 6 |
| Includes fitting kit | FK15088A |
| Product met | Euro 6 |
| To be used with part number(s) | FK15088 |
Important compatibility info
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit, motor-specific oil supply lines (feed/return) |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | BorgWarner Turbo REMAN |
| Manufacturer | BorgWarner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Specification | FULL FITKIT SUPPLIED |
| Function | Charger, charging (supercharged/turbocharged) |
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
Important compatibility info
Important compatibility info
Important compatibility info
Important compatibility info
| Material | Cordierite |
| Inspection Tag | E24-103R |
| Type | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Function | Soot/Particulate Filter, exhaust system |
| Extra Description | Approved |
| Labels & Certifications | Euro 5 |
| Includes fitting kit | FK11292B |
| Product met | Euro 5 |
| To be used with part number(s) | PP11292A |
Important compatibility info
| Material | Cordierite |
| Inspection Tag | E24-103R |
| Type | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Function | Soot/Particulate Filter, exhaust system |
| Extra Description | Approved |
| Labels & Certifications | Euro 5 |
| Includes fitting kit | FK11292B |
| Product met | Euro 5 |
| To be used with part number(s) | PP11292A |
Important compatibility info
| Specification | FULL FITKIT SUPPLIED |
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Function | Charger, charging (supercharged/turbocharged) |
Important compatibility info
| Additional Information 2 | with dryer |
| Vehicle Equipment | for vehicles with level control |
| Packaging height | 22 cm |
| Packaging width | 19 cm |
| Braking / Drive Dynamics | for vehicles with EDC, for vehicles without EDC |
| Spring Type | for vehicles with rear axle air suspension |
| Net weight | 4.1 kg |
| Manufactured in | Germany |
| Function | Compressor, compressed-air system |
| Packaging length | 30 cm |
| Extra Description | Original OES-Product |
| Type | Compressor, compressed-air system |
| Weight | 4.4 kg |
| Additional Information | Relay replacement necessary, with relay |
Important compatibility info
| Additional Information 2 | with dryer |
| Vehicle Equipment | for vehicles with level control |
| Packaging height | 22 cm |
| Packaging width | 19 cm |
| Braking / Drive Dynamics | for vehicles with EDC, for vehicles without EDC |
| Spring Type | for vehicles with rear axle air suspension |
| Net weight | 4.1 kg |
| Manufactured in | Germany |
| Function | Compressor, compressed-air system |
| Packaging length | 30 cm |
| Extra Description | Original OES-Product |
| Type | Compressor, compressed-air system |
| Weight | 4.4 kg |
| Additional Information | Relay replacement necessary, with relay |
Important compatibility info
| Hub Profile | 20.1 x 18.3 |
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
| Number of Teeth | 24 |
Important compatibility info
| Hub Profile | 20.1 x 18.3 |
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
| Number of Teeth | 24 |
Important compatibility info
| Hub Profile | 29.1 x 23 |
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
| Number of Teeth | 10 |
Important compatibility info
| Hub Profile | 29.1 x 23 |
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
| Number of Teeth | 10 |
Important compatibility info
| Type | Compressor, compressed-air system |
| Function | Compressor, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Compressor, compressed-air system |
| Function | Compressor, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Packaging width | 18.50 cm |
| Type | Compressor, air conditioning |
| Number of grooves | 6 |
| Manufacturer Restriction | Sanden |
| Packaging length | 29.2 cm |
| Extra Description | BEHR *** PREMIUM LINE *** |
| Compressor Oil | PAG 46 SP-A2 |
| Refrigerant | R 1234yf, R 134a |
| Net Weight | 6118 g |
| Belt Pulley Diameter | 110 mm |
| Compressor ID | PXC16 |
| Voltage | 12 V |
| Pulleys | with v-ribbed belt pulley |
| Number of Ribs | 6 |
| Cylinder Head ID (Compressor) | PRA |
| Port / Connector type | PAD |
| Function | Compressor, air conditioning |
| Packaging height | 21.25 cm |
Additional Information
General Information
PREMIUM LINE - OE Quality for customers expecting the optimum
Important compatibility info
| Packaging width | 18.50 cm |
| Type | Compressor, air conditioning |
| Number of grooves | 6 |
| Manufacturer Restriction | Sanden |
| Packaging length | 29.2 cm |
| Extra Description | BEHR *** PREMIUM LINE *** |
| Compressor Oil | PAG 46 SP-A2 |
| Refrigerant | R 1234yf, R 134a |
| Net Weight | 6118 g |
| Belt Pulley Diameter | 110 mm |
| Compressor ID | PXC16 |
| Voltage | 12 V |
| Pulleys | with v-ribbed belt pulley |
| Number of Ribs | 6 |
| Cylinder Head ID (Compressor) | PRA |
| Port / Connector type | PAD |
| Function | Compressor, air conditioning |
| Packaging height | 21.25 cm |
Additional Information
General Information
PREMIUM LINE - OE Quality for customers expecting the optimum
Important compatibility info
| Type | EGR Valve |
| Connector Shape | D Shape |
| Operating Mode | Electric |
| Function | EGR Valve |
Important compatibility info
| Type | EGR Valve |
| Connector Shape | D Shape |
| Operating Mode | Electric |
| Function | EGR Valve |
Important compatibility info
Important compatibility info
Important compatibility info
| Includes fitting kit | FK11640A |
| Labels & Certifications | Up to Euro 4 |
| Type | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Function | Soot/Particulate Filter, exhaust system |
| Material | Cordierite |
| Product met | Euro 4 |
| Extra Description | Non-approved |
| To be used with part number(s) | FK11640, PP11640A, PP11640B, PP11640C |
Important compatibility info
| Includes fitting kit | FK11640A |
| Labels & Certifications | Up to Euro 4 |
| Type | Soot/Particulate Filter, exhaust system |
| Guarantee | 2 years guarantee |
| Function | Soot/Particulate Filter, exhaust system |
| Material | Cordierite |
| Product met | Euro 4 |
| Extra Description | Non-approved |
| To be used with part number(s) | FK11640, PP11640A, PP11640B, PP11640C |
Important compatibility info
| Guarantee | 2 years guarantee |
| Function | Soot/Particulate Filter, exhaust system |
| To be used with part number(s) | FK11640, PP11640A, PP11640B, PP11640C |
| Product met | Euro 4 |
| Type | Soot/Particulate Filter, exhaust system |
| Material | Silicon carbide |
| Extra Description | Non-approved |
| Labels & Certifications | Euro 4 |
| Includes fitting kit | FK11640A |
Important compatibility info
| Guarantee | 2 years guarantee |
| Function | Soot/Particulate Filter, exhaust system |
| To be used with part number(s) | FK11640, PP11640A, PP11640B, PP11640C |
| Product met | Euro 4 |
| Type | Soot/Particulate Filter, exhaust system |
| Material | Silicon carbide |
| Extra Description | Non-approved |
| Labels & Certifications | Euro 4 |
| Includes fitting kit | FK11640A |
Important compatibility info
| Includes fitting kit | FK91102B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E57-103R |
| Product met | Euro 3 |
| To be used with part number(s) | FK91102 |
| Material | Ceramic |
Important compatibility info
| Includes fitting kit | FK91102B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E57-103R |
| Product met | Euro 3 |
| To be used with part number(s) | FK91102 |
| Material | Ceramic |
Important compatibility info
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo NEW |
| Manufacturer | Garrett |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Net weight | 0.308 kg |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Housing length | 130 mm |
| Manufacturer Restriction | Bosch |
| Weight | 0.290 kg |
| Housing Diameter | 70 mm |
| Connector Shape | Rectangular |
| Housing Type | with housing |
| Number of Poles | 4 -pin connector |
| Extra Description | Lucas Premium Blade |
Important compatibility info
| Net weight | 0.308 kg |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Housing length | 130 mm |
| Manufacturer Restriction | Bosch |
| Weight | 0.290 kg |
| Housing Diameter | 70 mm |
| Connector Shape | Rectangular |
| Housing Type | with housing |
| Number of Poles | 4 -pin connector |
| Extra Description | Lucas Premium Blade |
Important compatibility info
Important compatibility info
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





















