Important compatibility info
| Current Strength | 120 A |
| Belt Pulley Diameter | 60 mm |
| Voltage | 12 V |
| Type | Alternator |
| Function | Alternator |
| Alternator Charge Current | 120 A |
| Pulleys | with belt pulley |
| Number of Ribs | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Current Strength | 120 A |
| Belt Pulley Diameter | 60 mm |
| Voltage | 12 V |
| Type | Alternator |
| Function | Alternator |
| Alternator Charge Current | 120 A |
| Pulleys | with belt pulley |
| Number of Ribs | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with seal ring, Control Unit/Software must be trained/updated |
| Fuel Type | Diesel |
| Type | Injector Nozzle |
| Function | Injector Nozzle |
| Replaces | A2C9303500080 |
Important compatibility info
| Additional Information 2 | with seal ring, Control Unit/Software must be trained/updated |
| Fuel Type | Diesel |
| Type | Injector Nozzle |
| Function | Injector Nozzle |
| Replaces | A2C9303500080 |
Important compatibility info
| Additional Information | with gears |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Important compatibility info
| Additional Information | with gears |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | with bulb, with bulb holder |
| Voltage | 12 V |
| Paired article numbers | 2SD 012 519-041 |
| Bulb Type | LED, WY21W |
| Light Function | with indicator, with stop light (LED), with taillight (LED) |
| Additionally Required Parts | 2SA 012 520-051, 2SA 012 520-071 |
| Left-hand / Right-hand Traffic | for left-hand traffic, for right-hand traffic |
| Light Design | LED |
| Number of light functions | 3 |
| Section | Outer section, Upper section |
| Lens Colour | Red |
| Registration Type | ECE approved, CCC approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GP009021-002)
Important compatibility info
| Placement on Vehicle | Left |
| Additional Information | with bulb, with bulb holder |
| Voltage | 12 V |
| Paired article numbers | 2SD 012 519-041 |
| Bulb Type | LED, WY21W |
| Light Function | with indicator, with stop light (LED), with taillight (LED) |
| Additionally Required Parts | 2SA 012 520-051, 2SA 012 520-071 |
| Left-hand / Right-hand Traffic | for left-hand traffic, for right-hand traffic |
| Light Design | LED |
| Number of light functions | 3 |
| Section | Outer section, Upper section |
| Lens Colour | Red |
| Registration Type | ECE approved, CCC approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GP009021-002)
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | with bulb, with bulb holder |
| Voltage | 12 V |
| Paired article numbers | 2SD 012 519-031 |
| Bulb Type | LED, WY21W |
| Light Function | with indicator, with stop light (LED), with taillight (LED) |
| Additionally Required Parts | 2SA 012 520-061, 2SA 012 520-081 |
| Left-hand / Right-hand Traffic | for left-hand traffic, for right-hand traffic |
| Light Design | LED |
| Number of light functions | 3 |
| Section | Outer section, Upper section |
| Lens Colour | Red |
| Registration Type | ECE approved, CCC approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GP009021-002)
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | with bulb, with bulb holder |
| Voltage | 12 V |
| Paired article numbers | 2SD 012 519-031 |
| Bulb Type | LED, WY21W |
| Light Function | with indicator, with stop light (LED), with taillight (LED) |
| Additionally Required Parts | 2SA 012 520-061, 2SA 012 520-081 |
| Left-hand / Right-hand Traffic | for left-hand traffic, for right-hand traffic |
| Light Design | LED |
| Number of light functions | 3 |
| Section | Outer section, Upper section |
| Lens Colour | Red |
| Registration Type | ECE approved, CCC approved |
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
Additional Information
Brief Information
*** Original spare part
- 1x Hella Bulb, direction indicator (8GP009021-002)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Additional Information 2 | with ABS sensor ring |
| Flange Diameter | 151.9 mm |
| Rim Hole Number | 5 -Hole |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
- 1x SKF Bearing (SKF00738)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Additional Information 2 | with ABS sensor ring |
| Flange Diameter | 151.9 mm |
| Rim Hole Number | 5 -Hole |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
- 1x SKF Bearing (SKF00738)
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Placement on Vehicle | Right |
| Additional Information 2 | with motor for headlamp levelling |
| Light Function | with low beam |
| Type | Headlight |
| Indicator Colour | transparent |
| Bulb Type | H7, W5W |
| Paired article numbers | 044947 |
| Vehicle Equipment | for vehicles with headlight levelling (electric) |
| Light Design | Halogen |
| Weight | 3.77 kg |
| Extra Description | ORIGINAL PART |
| Function | Headlight |
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Placement on Vehicle | Right |
| Additional Information 2 | with motor for headlamp levelling |
| Light Function | with low beam |
| Type | Headlight |
| Indicator Colour | transparent |
| Bulb Type | H7, W5W |
| Paired article numbers | 044947 |
| Vehicle Equipment | for vehicles with headlight levelling (electric) |
| Light Design | Halogen |
| Weight | 3.77 kg |
| Extra Description | ORIGINAL PART |
| Function | Headlight |
Important compatibility info
| Diameter | 200 mm |
| Additional Information | with central slave cylinder |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510013310)
- 1x LuK Clutch Kit (620331609)
Important compatibility info
| Diameter | 200 mm |
| Additional Information | with central slave cylinder |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510013310)
- 1x LuK Clutch Kit (620331609)
Important compatibility info
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB448)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT1071)
- 1x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT444)
- 1x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT445)
Important compatibility info
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB448)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT1071)
- 1x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT444)
- 1x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT445)
Important compatibility info
| Length | 225 mm |
| Voltage | 12 V |
| Rotation Direction | Anticlockwise rotation |
| Rated Power | 2 kW |
| Number of mounting bores | 2 |
| Pinion Rest Position | 27.4 mm |
| Type | Starter |
| Function | Starter |
| Number of Teeth | 13 |
| Bore Diameter | 13.5 mm |
| Flange Diameter | 79 mm |
| Position / Degree | links ° |
| Clamp | 30,50 |
| Connecting Angle | 45 ° |
| Bore Diameter 2 | 13.5 mm |
| Starter Type | Floating pinion |
| Fastening hole angle measurement [Degree] | 45 ° |
| Replaced by | 1986S01124 |
Important compatibility info
| Length | 225 mm |
| Voltage | 12 V |
| Rotation Direction | Anticlockwise rotation |
| Rated Power | 2 kW |
| Number of mounting bores | 2 |
| Pinion Rest Position | 27.4 mm |
| Type | Starter |
| Function | Starter |
| Number of Teeth | 13 |
| Bore Diameter | 13.5 mm |
| Flange Diameter | 79 mm |
| Position / Degree | links ° |
| Clamp | 30,50 |
| Connecting Angle | 45 ° |
| Bore Diameter 2 | 13.5 mm |
| Starter Type | Floating pinion |
| Fastening hole angle measurement [Degree] | 45 ° |
| Replaced by | 1986S01124 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023









