Important compatibility info
| Width | 43 mm |
| Placement on Vehicle | Front Axle |
| Replaces | ADN18264 |
| Function | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 29 mm |
| Outer diameter | 92 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with water pump |
| Function | Water Pump & Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5579XS)
- 1x Gates Tensioner Pulley, timing belt (T43133)
- 1x Gates Deflection Pulley/Guide Pulley, timing belt (T42141)
- 1x Gates Water Pump, engine cooling (WP0096)
Important compatibility info
| Additional Information | with water pump |
| Function | Water Pump & Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5579XS)
- 1x Gates Tensioner Pulley, timing belt (T43133)
- 1x Gates Deflection Pulley/Guide Pulley, timing belt (T42141)
- 1x Gates Water Pump, engine cooling (WP0096)
Important compatibility info
| Additional Information | with synthetic grease, with central slave cylinder |
| Outer diameter | 241 mm |
| Number of Teeth | 23 |
| Multi-piece | three-piece |
| Type | Clutch Kit |
| Function | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with synthetic grease, with central slave cylinder |
| Outer diameter | 241 mm |
| Number of Teeth | 23 |
| Multi-piece | three-piece |
| Type | Clutch Kit |
| Function | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rated Power | 1.6 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 30 ° |
| Jaw opening angle measurement [Degree] | 330 ° |
| Starter Type | Self-supporting |
| Bore Diameter 2 | 8.5 mm |
| Pinion Rest Position | 14 mm |
| Connecting Angle | 30 ° |
| Clamp | 50, 30 |
| Position / Degree | links ° |
| Flange Diameter | 70 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 8.5 mm |
| Number of Teeth | 10 |
| Length | 225 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Rated Power | 1.6 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 30 ° |
| Jaw opening angle measurement [Degree] | 330 ° |
| Starter Type | Self-supporting |
| Bore Diameter 2 | 8.5 mm |
| Pinion Rest Position | 14 mm |
| Connecting Angle | 30 ° |
| Clamp | 50, 30 |
| Position / Degree | links ° |
| Flange Diameter | 70 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 8.5 mm |
| Number of Teeth | 10 |
| Length | 225 mm |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Type | Alternator |
| Voltage | 12 V |
| Alternator Charge Current | 120 A |
| Pulleys | without belt pulley |
| Manufacturer Restriction | Denso |
| Function | Alternator |
| Number of Ribs | 5 |
Important compatibility info
| Type | Alternator |
| Voltage | 12 V |
| Alternator Charge Current | 120 A |
| Pulleys | without belt pulley |
| Manufacturer Restriction | Denso |
| Function | Alternator |
| Number of Ribs | 5 |
Important compatibility info
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 32 |
| Function | Drive Shaft |
| Length | 809 mm |
| Inner Length | 85.5 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 32 |
| Function | Drive Shaft |
| Length | 809 mm |
| Inner Length | 85.5 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
| Connector Shape | Oval |
| Operating Mode | Electric-pneumatic |
| Function | EGR Valve |
| Type | EGR Valve |
| Number of Poles | 3 -pin connector |
Important compatibility info
| Connector Shape | Oval |
| Operating Mode | Electric-pneumatic |
| Function | EGR Valve |
| Type | EGR Valve |
| Number of Poles | 3 -pin connector |
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Steering arm type | Control Arm |
| Paired article numbers | AST3341 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Steering arm type | Control Arm |
| Paired article numbers | AST3341 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Includes fitting kit | FK80334B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Product met | Euro 4 |
| To be used with part number(s) | FK80334 |
| Material | Ceramic |
Important compatibility info
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Includes fitting kit | FK80334B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Product met | Euro 4 |
| To be used with part number(s) | FK80334 |
| Material | Ceramic |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 4 | 650 mm |
| Length 2 | 831 mm |
| Length 3 | 978 mm |
| Type | Cable Pull, manual transmission |
| Length 1 | 1141 mm |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Length 4 | 650 mm |
| Length 2 | 831 mm |
| Length 3 | 978 mm |
| Type | Cable Pull, manual transmission |
| Length 1 | 1141 mm |
Important compatibility info
| Length 2 | 735 mm |
| Length 3 | 975 mm |
| Length 4 | 716 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Length 1 | 1010 mm |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023










