Important compatibility info
Voltage | 12 V |
Alternator Charge Current | 120 A |
for OE number | 124425087 |
Type | Alternator |
Function | Alternator |
Important compatibility info
Voltage | 12 V |
Alternator Charge Current | 120 A |
for OE number | 124425087 |
Type | Alternator |
Function | Alternator |
Important compatibility info
Function | Timing Belt Kit |
Additional Information | without water pump |
Extra Description | PowerGrip™ |
Type | Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5405XS)
- 1x Gates Tensioner Pulley, timing belt (T41183)
- 1x Gates Vibration Damper, timing belt (T43226)
Important compatibility info
Function | Timing Belt Kit |
Additional Information | without water pump |
Extra Description | PowerGrip™ |
Type | Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5405XS)
- 1x Gates Tensioner Pulley, timing belt (T41183)
- 1x Gates Vibration Damper, timing belt (T43226)
Important compatibility info
Type | Timing Chain Kit |
Number of Chain Links | 118. 56. 84 |
Function | Timing Chain Kit |
Chain Type | Simplex |
Additional Information | with gears |
Important compatibility info
Type | Timing Chain Kit |
Number of Chain Links | 118. 56. 84 |
Function | Timing Chain Kit |
Chain Type | Simplex |
Additional Information | with gears |
Important compatibility info
Ampere-Hours | 120 Ah |
Function | Starter Battery |
Terminal Layout | Positive Front Left |
Cold Cranking Amperage (CCA) | 800 A |
Width | 175 mm |
Cold-test Current, EN | 800 A |
Type | Starter Battery |
Voltage | 12 V |
Extra Description | EXIDE DUAL |
Replaces | ER650 |
Length | 350 mm |
Height | 290 mm |
Hold-down Type | B00 |
Post Positions | 1 |
Title | Exide Conventional Battery - 12 V - 120Ah - 800CCA |
Warranty | 2 year warranty |
Additional Information
- EXIDE Dual is certified by DNV-GL for your safety on board.
- The Dual battery range, with Wh* performance from 450-1500wh, is the ideal choice to cover all dual-supply needs for the most popular recreational boats.
- Dual's reinforced design, combined with a good recharging procedure, is key to providing the best result and service life. The Dual battery range, with Wh* performance from 450-1500wh, is the ideal choice to cover all dual-supply needs for the most popula
- EXIDE Dual battery range is designed for boats and caravans with one battery bank for all consumers. It is also suitable for additional batteries applied directly to electrical winches, thrusters and trolling motors. The batteries are partially discharged
- Exide DUAL battery range is designed for boats and caravans with one battery bank for all consumers. It is also suitable for additional batteries applied directly to electrical winches, thrusters and trolling motors. The batteries are partially discharged
Important compatibility info
Ampere-Hours | 120 Ah |
Function | Starter Battery |
Terminal Layout | Positive Front Left |
Cold Cranking Amperage (CCA) | 800 A |
Width | 175 mm |
Cold-test Current, EN | 800 A |
Type | Starter Battery |
Voltage | 12 V |
Extra Description | EXIDE DUAL |
Replaces | ER650 |
Length | 350 mm |
Height | 290 mm |
Hold-down Type | B00 |
Post Positions | 1 |
Title | Exide Conventional Battery - 12 V - 120Ah - 800CCA |
Warranty | 2 year warranty |
Additional Information
- EXIDE Dual is certified by DNV-GL for your safety on board.
- The Dual battery range, with Wh* performance from 450-1500wh, is the ideal choice to cover all dual-supply needs for the most popular recreational boats.
- Dual's reinforced design, combined with a good recharging procedure, is key to providing the best result and service life. The Dual battery range, with Wh* performance from 450-1500wh, is the ideal choice to cover all dual-supply needs for the most popula
- EXIDE Dual battery range is designed for boats and caravans with one battery bank for all consumers. It is also suitable for additional batteries applied directly to electrical winches, thrusters and trolling motors. The batteries are partially discharged
- Exide DUAL battery range is designed for boats and caravans with one battery bank for all consumers. It is also suitable for additional batteries applied directly to electrical winches, thrusters and trolling motors. The batteries are partially discharged
Important compatibility info
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Shock Absorber Design | Suspension Strut |
Placement on Vehicle | Front Axle |
Function | Shock Absorber |
Length | 365 mm |
Extra Description | Excel-G |
Type | Shock Absorber |
Shock Absorber Mounting Type | Top pin |
Additional Information
General Information
Please refer to the technical drawing in "Documents"
Important compatibility info
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Shock Absorber Design | Suspension Strut |
Placement on Vehicle | Front Axle |
Function | Shock Absorber |
Length | 365 mm |
Extra Description | Excel-G |
Type | Shock Absorber |
Shock Absorber Mounting Type | Top pin |
Additional Information
General Information
Please refer to the technical drawing in "Documents"
Important compatibility info
Material | Aluminium |
Type | Radiator, engine cooling |
Function | Radiator, engine cooling |
Radiator type | Brazed cooling fins |
Core Length | 680 mm |
Core Width | 378 mm |
Core Depth | 26 mm |
Important compatibility info
Material | Aluminium |
Type | Radiator, engine cooling |
Function | Radiator, engine cooling |
Radiator type | Brazed cooling fins |
Core Length | 680 mm |
Core Width | 378 mm |
Core Depth | 26 mm |
Important compatibility info
Type | Catalytic Converter |
Guarantee | 2 years guarantee |
Includes fitting kit | FK80265B |
Function | Catalytic Converter |
Extra Description | Approved |
Inspection Tag | E9-103R |
Product met | Euro 3 |
To be used with part number(s) | FK80265 |
Material | Ceramic |
Important compatibility info
Type | Catalytic Converter |
Guarantee | 2 years guarantee |
Includes fitting kit | FK80265B |
Function | Catalytic Converter |
Extra Description | Approved |
Inspection Tag | E9-103R |
Product met | Euro 3 |
To be used with part number(s) | FK80265 |
Material | Ceramic |
Important compatibility info
Placement on Vehicle | Front Axle |
Height | 59 mm |
Outer diameter | 347 mm |
Additional Information 2 | with bolts/screws |
Brake Disc Thickness | 30 mm |
Number of Holes | 5 |
Minimum thickness | 28.5 mm |
Centering Diameter | 68 mm |
Surface | Coated |
Machining | High-carbon |
Tightening Torque | 120 Nm |
Type | Brake Disc Rotor |
Function | Brake Disc |
Extra Description | XTRA LINE - Xtra |
Rotor Style | perforated/vented |
Additional Information
Brief Information
PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.
General Information
The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
Important compatibility info
Placement on Vehicle | Front Axle |
Height | 59 mm |
Outer diameter | 347 mm |
Additional Information 2 | with bolts/screws |
Brake Disc Thickness | 30 mm |
Number of Holes | 5 |
Minimum thickness | 28.5 mm |
Centering Diameter | 68 mm |
Surface | Coated |
Machining | High-carbon |
Tightening Torque | 120 Nm |
Type | Brake Disc Rotor |
Function | Brake Disc |
Extra Description | XTRA LINE - Xtra |
Rotor Style | perforated/vented |
Additional Information
Brief Information
PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.
General Information
The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
Important compatibility info
Extra Description | Approved |
To be used with part number(s) | FK80519 |
Inspection Tag | E9-103R |
Guarantee | 2 years guarantee |
Function | Catalytic Converter |
Type | Catalytic Converter |
Product met | Euro 4 |
Placement on Vehicle | Rear |
Material | Ceramic |
Important compatibility info
Extra Description | Approved |
To be used with part number(s) | FK80519 |
Inspection Tag | E9-103R |
Guarantee | 2 years guarantee |
Function | Catalytic Converter |
Type | Catalytic Converter |
Product met | Euro 4 |
Placement on Vehicle | Rear |
Material | Ceramic |
Important compatibility info
Voltage | 12 V |
Number of Teeth | 9 |
Plug Type ID | 0268 |
Rotation Direction | Clockwise rotation |
Rated Power | 2 kW |
Number of mounting bores | 2 |
Flange Diameter | 75 mm |
Clamp | Pin "30" M8 B+, Pin "50" Plug |
Type | Starter |
Function | Starter |
Net weight | 4.61 kg |
Important compatibility info
Voltage | 12 V |
Number of Teeth | 9 |
Plug Type ID | 0268 |
Rotation Direction | Clockwise rotation |
Rated Power | 2 kW |
Number of mounting bores | 2 |
Flange Diameter | 75 mm |
Clamp | Pin "30" M8 B+, Pin "50" Plug |
Type | Starter |
Function | Starter |
Net weight | 4.61 kg |
Important compatibility info
Number of Teeth | 21 |
Additional Information 2 | with bearing |
Function | Clutch Kit |
Extra Description | 3-1 Kit |
Hub Profile | 29,8 |
Friction Lining Outer Diameter | 236 mm |
Type | Clutch Kit |
Important compatibility info
Number of Teeth | 21 |
Additional Information 2 | with bearing |
Function | Clutch Kit |
Extra Description | 3-1 Kit |
Hub Profile | 29,8 |
Friction Lining Outer Diameter | 236 mm |
Type | Clutch Kit |
Important compatibility info
Type | Timing Chain Kit |
Additional Information | with gears |
Function | Timing Chain Kit |
Number of Chain Links | 162. 66 |
Chain Type | Silent Chain |
Important compatibility info
Type | Timing Chain Kit |
Additional Information | with gears |
Function | Timing Chain Kit |
Number of Chain Links | 162. 66 |
Chain Type | Silent Chain |
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 196231 |
Additional Information | with rubber-metal mounts |
Placement on Vehicle | Lower, Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Material | Steel |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 18.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 196231 |
Additional Information | with rubber-metal mounts |
Placement on Vehicle | Lower, Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Material | Steel |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 18.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Net weight | 6.51 kg |
Function | Alternator |
Bore Diameter 1 | 8.5 mm |
Type | Alternator |
Clamp | M8 B+, COM |
Vehicle Main Current | for vehicles with 12V main current |
Belt Pulley Diameter | 55 mm |
Alternator Charge Current | 110 A |
Plug Type ID | 0182 |
Voltage | 14 V |
Number of Ribs | 6 |
Pulleys | with multi-belt pulley |
Important compatibility info
Net weight | 6.51 kg |
Function | Alternator |
Bore Diameter 1 | 8.5 mm |
Type | Alternator |
Clamp | M8 B+, COM |
Vehicle Main Current | for vehicles with 12V main current |
Belt Pulley Diameter | 55 mm |
Alternator Charge Current | 110 A |
Plug Type ID | 0182 |
Voltage | 14 V |
Number of Ribs | 6 |
Pulleys | with multi-belt pulley |
Important compatibility info
Length | 600 mm |
External Teeth, Wheel Side | 31 |
Type | Drive Shaft |
External Teeth, Diff.Side | 31 |
Function | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Important compatibility info
Length | 600 mm |
External Teeth, Wheel Side | 31 |
Type | Drive Shaft |
External Teeth, Diff.Side | 31 |
Function | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Important compatibility info
Function | Injector |
Housing Colour | Black |
Type | Injector |
Connector Shape | oval |
Number of Poles | 2 -pin connector |
Important compatibility info
Function | Injector |
Housing Colour | Black |
Type | Injector |
Connector Shape | oval |
Number of Poles | 2 -pin connector |
Important compatibility info
Placement on Vehicle | Cylinder Head, Outlet |
Plug Type | Male |
Type | Control Valve, camshaft adjustment |
Function | Control Valve, camshaft adjustment |
Number of Pins | 2 |
Pin Shape | Flat |
Important compatibility info
Placement on Vehicle | Cylinder Head, Outlet |
Plug Type | Male |
Type | Control Valve, camshaft adjustment |
Function | Control Valve, camshaft adjustment |
Number of Pins | 2 |
Pin Shape | Flat |
Important compatibility info
Placement on Vehicle | Rear Axle Left, Upper |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Length | 450 mm |
Height | 130 mm |
Width | 450 mm |
Material | Sheet Steel |
Additional Information 2 | without ball joint |
Paired article numbers | TC4907 |
Important compatibility info
Placement on Vehicle | Rear Axle Left, Upper |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Length | 450 mm |
Height | 130 mm |
Width | 450 mm |
Material | Sheet Steel |
Additional Information 2 | without ball joint |
Paired article numbers | TC4907 |
Important compatibility info
Placement on Vehicle | Front Axle |
Additional Information | Photo corresponds to scope of supply |
Outer diameter | 164.5 mm |
Outer diameter 1 | 100 mm |
Outer diameter 2 | 71.9 mm |
Width 2 | 52 mm |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Important compatibility info
Placement on Vehicle | Front Axle |
Additional Information | Photo corresponds to scope of supply |
Outer diameter | 164.5 mm |
Outer diameter 1 | 100 mm |
Outer diameter 2 | 71.9 mm |
Width 2 | 52 mm |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Important compatibility info
Function | Mass Air Flow Sensor |
Housing Type | without housing |
Connector Shape | Rectangular |
Number of Poles | 4 -pin connector |
for OE number | 13 62 8 583 496 |
Type | Mass Air Flow Sensor |
Net weight | 0.030 kg |
Manufacturer Restriction | Bosch |
Important compatibility info
Function | Mass Air Flow Sensor |
Housing Type | without housing |
Connector Shape | Rectangular |
Number of Poles | 4 -pin connector |
for OE number | 13 62 8 583 496 |
Type | Mass Air Flow Sensor |
Net weight | 0.030 kg |
Manufacturer Restriction | Bosch |
Important compatibility info
Function | Pressure Control Valve, common rail system |
Type | Pressure Control Valve, common rail system |
Number of Inlets / Outlets | 1 |
Housing Colour | Black |
Net weight | 0.194 kg |
Important compatibility info
Function | Pressure Control Valve, common rail system |
Type | Pressure Control Valve, common rail system |
Number of Inlets / Outlets | 1 |
Housing Colour | Black |
Net weight | 0.194 kg |
Important compatibility info
Extra Description | Kerr Nelson |
Function | Air Mass Sensor |
Housing Type | without housing |
Connector Shape | Rectangular |
Number of Poles | 4 -pin connector |
Type | Air Mass Sensor |
Important compatibility info
Extra Description | Kerr Nelson |
Function | Air Mass Sensor |
Housing Type | without housing |
Connector Shape | Rectangular |
Number of Poles | 4 -pin connector |
Type | Air Mass Sensor |
Important compatibility info
Diameter | 240 mm |
for flywheel depth | 11.9 mm |
Adjustment | with automatic adjustment |
Function | Clutch Kit |
Extra Description | LuK SAC |
Type | Clutch Kit |
Additional Information
- 1x LuK Clutch Pressure Plate (124035510)
- 1x LuK Clutch Disc (324025510)
Important compatibility info
Diameter | 240 mm |
for flywheel depth | 11.9 mm |
Adjustment | with automatic adjustment |
Function | Clutch Kit |
Extra Description | LuK SAC |
Type | Clutch Kit |
Additional Information
- 1x LuK Clutch Pressure Plate (124035510)
- 1x LuK Clutch Disc (324025510)
Important compatibility info
Function | Alternator |
Alternator Charge Current | 140 A |
Pulleys | with freewheel belt pulley |
Number of Ribs | 6 |
Voltage | 12 V |
Type | Alternator |
Manufacturer Restriction | Bosch |
Weight | 7.4 kg |
Length | 26.01 cm |
Height | 19.99 cm |
Width | 22.5 cm |
Important compatibility info
Function | Alternator |
Alternator Charge Current | 140 A |
Pulleys | with freewheel belt pulley |
Number of Ribs | 6 |
Voltage | 12 V |
Type | Alternator |
Manufacturer Restriction | Bosch |
Weight | 7.4 kg |
Length | 26.01 cm |
Height | 19.99 cm |
Width | 22.5 cm |
Important compatibility info
Type | Interior Blower |
Function | Interior Blower |
Driver Position | for right-hand drive vehicles |
Important compatibility info
Type | Interior Blower |
Function | Interior Blower |
Driver Position | for right-hand drive vehicles |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023