Important compatibility info
Function | Shaft Seal, crankshaft |
Placement on Vehicle | frontal sided |
Width | 7 mm |
Inner diameter | 31 mm |
Rotation Direction | Clockwise rotation |
Type | Shaft Seal, crankshaft |
Outer diameter | 41 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1 |
Number of Connectors / Ports | 1 |
Colour Coding | Green |
Function | Oil Pressure Switch |
Switch point to | 0.6 bar |
Switch point from | 0.3 bar |
Spanner Size | 22 |
Type | Oil Pressure Switch |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, Wheel Side, transmission sided |
Length | 81 mm |
Inner diameter 1 | 25 mm |
Inner diameter 2 | 62 mm |
Function | Bellow Kit, drive shaft |
Material | Rubber |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03312)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38757)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | Wheel Side |
Length | 83 mm |
Inner diameter 1 | 20 mm |
Inner diameter 2 | 65 mm |
Function | Bellow Kit, drive shaft |
Material | Rubber |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (12803)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (38764)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Length | 235 mm |
Height | 46 mm |
Width | 201 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 47 mm |
Width | 40 mm |
Material | Rubber |
Thickness | 40 mm |
Inner diameter | 19 mm |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | ACM (Polyacrylate) |
Thickness | 2.5 mm |
Type | Gasket, timing case |
Function | Gasket, timing case |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Width | 43 mm |
Material | Rubber/Metal |
Outer diameter | 75 mm |
Inner diameter | 11 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1 |
Length | 336 mm |
Function | Brake Hose |
Internal Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | transmission sided |
Material | FPM (fluoride rubber) |
Outer diameter | 105 mm |
Thickness | 11 mm |
Inner diameter | 85 mm |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Placement on Vehicle | Rear Axle |
Thickness | 17 mm |
Number of Knobs | 4 |
Outer diameter | 105 mm |
Inner diameter | 63 mm |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 154 mm |
Inner diameter | 42 mm |
Filter type | Filter Insert |
Function | Oil Filter |
Outer diameter | 89 mm |
Type | Oil Filter |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 69 mm |
Width | 84 mm |
Filter type | Filter Insert |
Length | 455 mm |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower |
Thickness | 23 mm |
Inner diameter | 12 mm |
Type | Mounting, radiator |
Function | Mounting, radiator |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 1 |
External Thread Size | M10 x 1 |
Shifting Points | 0.9 bar |
Function | Oil Pressure Switch |
Colour | Grey |
Spanner Size | 22 |
Type | Oil Pressure Switch |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 86 mm |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with washers |
Additional Information | with rubber mounts, with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (10516)
- 2x Febi Bushing, stabiliser coupling rod (03212)
Important compatibility info
Length | 106 mm |
Material | Plastic |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M10 x 1 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 295 mm |
Spanner Size | 14 |
Function | Brake Hose |
External Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 190 mm |
Material | Thermoplast |
Inner diameter 1 | 12 mm |
Inner diameter 2 | 47 mm |
Function | Bellow, steering |
Type | Bellow, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Length | 107 mm |
Material | Thermoplast |
Inner diameter 1 | 32 mm |
Inner diameter 2 | 82 mm |
Function | Bellow, drive shaft |
Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Filter type | Filter Insert |
Width | 175 mm |
Length | 255 mm |
Type | Air Filter |
Height | 39 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Rear, Right Rear |
Length | 670 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Length | 85 mm |
Material | Thermoplast |
Inner diameter 1 | 22 mm |
Inner diameter 2 | 78 mm |
Function | Bellow, drive shaft |
Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Length | 85 mm |
Material | Thermoplast |
Inner diameter 1 | 22 mm |
Inner diameter 2 | 74 mm |
Type | Bellow, drive shaft |
Function | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | 3/4" - 16 UNF |
Height | 120 mm |
Outer diameter | 76 mm |
Filter type | Spin-on Filter |
Type | Oil Filter |
Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Shaft Seal, drive shaft |
Material | ACM (Polyacrylate) |
Outer diameter | 52 mm |
Thickness | 11 mm |
Inner diameter | 40 mm |
Type | Shaft Seal, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 7.5 mm |
Material | Steel |
Outer diameter | 85 mm |
Inner diameter | 75 mm |
Number of Teeth, ABS ring | 38 |
Function | Sensor Ring, ABS |
Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Guide, timing chain |
Engine Management | Timing Chain |
Placement on Vehicle | Left, Upper |
Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Fuel filter |
External Thread Size | M26 x 2 |
Height | 83 mm |
Outer diameter | 35 mm |
Filter type | Pre-filter |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 102 mm |
Outer diameter | 92 mm |
Inner diameter | 27 mm |
Filter type | Filter Insert |
Function | Fuel filter |
Type | Fuel filter |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 38 mm |
Outer diameter | 60 mm. 46 mm |
Inner diameter | 19.8 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Placement on Vehicle | Front Axle Left, Rear, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter 2 | 50 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 197 mm |
Material | Thermoplast |
Inner diameter 1 | 12 mm |
Function | Bellow Kit, steering |
Type | Bellow Kit, steering |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (102364)
- 1x Febi Clamping Clip (38754)
- 1x Febi Clamping Clip (38762)
Important compatibility info
Placement on Vehicle | Centre |
Height | 20.5 mm. 12.5 mm |
Material | FPM (fluoride rubber) |
Outer diameter | 82 mm |
Inner diameter | 48 mm |
Function | Gasket, differential |
Type | Gasket, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 30 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Cooling Hose | from coolant regulator housing to engine cooler |
Function | Radiator Hose |
Wall Thickness | 4 mm |
Type | Radiator Hose |
for OE number | 1343.HX |
Placement on Vehicle | Upper Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 65 mm |
Width | 48 mm |
Outer diameter | 48 mm |
Thickness | 65 mm |
Inner diameter | 19 mm |
Function | Bushing, axle beam |
Material | Rubber/Metal |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 47 mm |
Width | 187 mm |
Length | 257 mm |
Function | Air Filter |
Filter type | Filter Insert |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Rear, Lower, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 53 mm |
Thickness | 50 mm |
Inner diameter | 19 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Yellow |
Function | Oil Dipstick |
Extra Description | febi Plus |
Length from grip collar to max. marking | 409 mm |
Length from grip collar to min. marking | 440 mm |
Type | Oil Dipstick |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 33 mm |
Inner diameter | 22 mm |
Cooling Hose | from expansion tank to water pipe |
Type | Radiator Hose |
Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Hose |
Type | Brake Hose |
Length | 470 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
External Thread Size | M10 x 1 |
Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 43 mm |
Thickness | 46 mm |
Inner diameter | 26.7 mm |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Material | Rubber |
Length | 54 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, differential |
Inner diameter | 12.6 mm |
Type | Mounting, differential |
Outer diameter | 56 mm |
Thickness | 55 mm |
Material | Rubber/Metal |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Length | 63 mm |
Material | Brass |
Spanner Size | 19 |
Colour | Black |
Thread Length | 12.4 mm |
Number of Connectors / Ports | 2 |
Function | Switch, reverse light |
Type | Switch, reverse light |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Function | Washer Fluid Pump, headlight cleaning |
Type | Washer Fluid Pump, headlight cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 16 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 244 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Thread Length | 23.5 mm |
Thickness | 59 mm |
Material | Steel |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,5 |
Additional Information | with nuts |
Pipe Diameter | 9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 315 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Surface | Painted |
Additional Information | with nuts |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper Front Axle, both sides |
Material | Rubber/Metal |
Outer diameter | 60 mm. 52 mm |
Thickness | 62 mm |
Inner diameter | 10 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Wheel Side |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 67 mm |
Material | Rubber |
Length | 83 mm |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (17083)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (38764)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 260 mm |
Function | Brake Hose |
Internal Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 837 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 5 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023