Important compatibility info
| Diameter | 228.6 mm |
| Function | Brake Booster |
| Type | Brake Booster |
Important compatibility info
| Diameter | 228.6 mm |
| Function | Brake Booster |
| Type | Brake Booster |
Important compatibility info
| Net Weight | 5070 g |
| Radiator type | Brazed cooling fins |
| Core Length | 620 mm |
| Transmission Type | Automatic Transmission, Manual Transmission |
| Packaging height | 59.00 cm |
| Additional Information | with accessories |
| Packaging length | 105.0 cm |
| Packaging width | 11.50 cm |
| Extra Description | BEHR |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Core Depth | 32 mm |
| Core Width | 405 mm |
| Water tank material (radiator) | Plastic |
Additional Information
General Information
SIMPLE FIT - Installation accessories, such as O-rings, seals, screws, nuts, bolts, and hose clips, are included with the product.
General Information
The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
Important compatibility info
| Net Weight | 5070 g |
| Radiator type | Brazed cooling fins |
| Core Length | 620 mm |
| Transmission Type | Automatic Transmission, Manual Transmission |
| Packaging height | 59.00 cm |
| Additional Information | with accessories |
| Packaging length | 105.0 cm |
| Packaging width | 11.50 cm |
| Extra Description | BEHR |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Core Depth | 32 mm |
| Core Width | 405 mm |
| Water tank material (radiator) | Plastic |
Additional Information
General Information
SIMPLE FIT - Installation accessories, such as O-rings, seals, screws, nuts, bolts, and hose clips, are included with the product.
General Information
The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
Important compatibility info
| Housing material | Cast Aluminium |
| Additional Information 2 | with seal ring, with bolts/screws |
| Pulleys | with belt pulley |
| Water pump impeller material | Metal |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Cast Aluminium |
| Additional Information 2 | with seal ring, with bolts/screws |
| Pulleys | with belt pulley |
| Water pump impeller material | Metal |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Inspection Tag | E9-103R |
| To be used with part number(s) | FK80349 |
| Extra Description | Approved |
| Type | Catalytic Converter |
| Product met | Euro 3 |
| Material | Ceramic |
Important compatibility info
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Inspection Tag | E9-103R |
| To be used with part number(s) | FK80349 |
| Extra Description | Approved |
| Type | Catalytic Converter |
| Product met | Euro 3 |
| Material | Ceramic |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Alternator Charge Current | 75 A |
| Belt Pulley Diameter | 55 mm |
| Function | Alternator |
| Type | Alternator |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Alternator Charge Current | 75 A |
| Belt Pulley Diameter | 55 mm |
| Function | Alternator |
| Type | Alternator |
Important compatibility info
| Function | Alternator |
| Belt Pulley Diameter | 52 mm |
| Alternator Charge Current | 70 A |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Type | Alternator |
Important compatibility info
| Function | Alternator |
| Belt Pulley Diameter | 52 mm |
| Alternator Charge Current | 70 A |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Type | Alternator |
Important compatibility info
| Diameter | 240 mm |
| Additional Information | with central slave cylinder |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Adjustment | with automatic adjustment |
Important compatibility info
| Diameter | 240 mm |
| Additional Information | with central slave cylinder |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Adjustment | with automatic adjustment |
Important compatibility info
| Wishbone Angle Measurement | 49 ° |
| Function | Control/Trailing Arm, wheel suspension |
| Bolt Hole Circle Diameter | 25 mm |
| Steering arm type | Triangular Control Arm (CV) |
| Outer diameter | 48 mm |
| Placement on Vehicle | Rear Axle |
| Type | Control/Trailing Arm, wheel suspension |
| for OE number | 942 350 18 05 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wishbone Angle Measurement | 49 ° |
| Function | Control/Trailing Arm, wheel suspension |
| Bolt Hole Circle Diameter | 25 mm |
| Steering arm type | Triangular Control Arm (CV) |
| Outer diameter | 48 mm |
| Placement on Vehicle | Rear Axle |
| Type | Control/Trailing Arm, wheel suspension |
| for OE number | 942 350 18 05 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
| Placement on Vehicle | Right |
| Additional Information | with bulb holder |
| Bulb Type | LED |
| Registration Type | ECE approved |
Important compatibility info
| Type | Tail Light Assembly |
| Function | Tail Light Assembly |
| Placement on Vehicle | Right |
| Additional Information | with bulb holder |
| Bulb Type | LED |
| Registration Type | ECE approved |
Important compatibility info
| Weight | 0.5 kg |
| Type | Fuel Feed Unit |
| Extra Description | Kerr Nelson |
| Function | Fuel Feed Unit |
| Delivery Quantity | 55 l/h |
| Housing Colour | Yellow |
| Number of Inlets / Outlets | 1 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Additional Information | with fuel sender unit |
| Placement on Vehicle | in fuel tank |
Important compatibility info
| Weight | 0.5 kg |
| Type | Fuel Feed Unit |
| Extra Description | Kerr Nelson |
| Function | Fuel Feed Unit |
| Delivery Quantity | 55 l/h |
| Housing Colour | Yellow |
| Number of Inlets / Outlets | 1 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Additional Information | with fuel sender unit |
| Placement on Vehicle | in fuel tank |
Important compatibility info
Important compatibility info
| Voltage | 12 V |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.9 kW |
| Number of Teeth | 11 |
| Quality | OE |
| Type | Starter |
| Function | Starter |
| Gross Weight | 4710 g |
Important compatibility info
| Voltage | 12 V |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.9 kW |
| Number of Teeth | 11 |
| Quality | OE |
| Type | Starter |
| Function | Starter |
| Gross Weight | 4710 g |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Bearing/Mounting Type | Molecular Bearing |
| Steering arm type | Triangular Control Arm (CV) |
| Additional Information 2 | with rubber mount |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle, outer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Bearing/Mounting Type | Molecular Bearing |
| Steering arm type | Triangular Control Arm (CV) |
| Additional Information 2 | with rubber mount |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle, outer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Weight | 0.801 kg |
| Inlet Diameter | 40 mm |
| Additional Information | without gasket/seal |
| Net weight | 0.698 kg |
| Function | Throttle body |
| Mounting Type | Bolted |
| Connector Shape | Rectangular |
| Housing Colour | Black |
| Number of Poles | 6 -pin connector |
| Type | Throttle body |
| Extra Description | Lucas Premium Blade |
Important compatibility info
| Weight | 0.801 kg |
| Inlet Diameter | 40 mm |
| Additional Information | without gasket/seal |
| Net weight | 0.698 kg |
| Function | Throttle body |
| Mounting Type | Bolted |
| Connector Shape | Rectangular |
| Housing Colour | Black |
| Number of Poles | 6 -pin connector |
| Type | Throttle body |
| Extra Description | Lucas Premium Blade |
Important compatibility info
| Product met | Euro 3 |
| Extra Description | Approved |
| To be used with part number(s) | FK80265 |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Material | Ceramic |
Important compatibility info
| Product met | Euro 3 |
| Extra Description | Approved |
| To be used with part number(s) | FK80265 |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Material | Ceramic |
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Steering arm type | Control Arm |
| Paired article numbers | NST3341 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023















