Important compatibility info
| Net weight | 1.682 kg |
| Cooling Type | Water-cooled |
| Operating Mode | Hydraulic |
| Material | Metal |
| Additional Information | without gasket / seal |
| Weight | 1.988 kg |
| Extra Description | Kerr Nelson |
| Function | Cooler, exhaust gas recirculation |
| Type | Cooler, exhaust gas recirculation |
Important compatibility info
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
Important compatibility info
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Driver Position | for right-hand drive vehicles |
| Inner length 2 | 796 mm |
| Inner length 1 | 796 mm |
| Outer length 1 | 1051 mm |
| Outer length 2 | 1073 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Driver Position | for right-hand drive vehicles |
| Inner length 2 | 796 mm |
| Inner length 1 | 796 mm |
| Outer length 1 | 1051 mm |
| Outer length 2 | 1073 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | V46-72-0187 |
| Additional Information 2 | High-pressure Side |
| Type | Sensor, fuel pressure |
| Function | Sensor, fuel pressure |
| Net weight | 0.052 kg |
Important compatibility info
| for OE number | V46-72-0187 |
| Additional Information 2 | High-pressure Side |
| Type | Sensor, fuel pressure |
| Function | Sensor, fuel pressure |
| Net weight | 0.052 kg |
Important compatibility info
| Net weight | 1.130 kg |
| Function | Fuel Feed Unit |
| Delivery Quantity | 35 l/h |
| Housing Colour | White |
| Number of Inlets / Outlets | 1 |
| Operating Mode | Electric |
| Number of Poles | 3 -pin connector |
| Additional Information | with fuel sender unit |
| Plug Type | Male |
| Weight | 1.233 kg |
| Type | Fuel Feed Unit |
Important compatibility info
| Net weight | 1.130 kg |
| Function | Fuel Feed Unit |
| Delivery Quantity | 35 l/h |
| Housing Colour | White |
| Number of Inlets / Outlets | 1 |
| Operating Mode | Electric |
| Number of Poles | 3 -pin connector |
| Additional Information | with fuel sender unit |
| Plug Type | Male |
| Weight | 1.233 kg |
| Type | Fuel Feed Unit |
Important compatibility info
| Diameter | 220 mm |
| Additional Information | with central slave cylinder |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510016410)
- 1x LuK Clutch Kit (622312709)
Important compatibility info
| Diameter | 220 mm |
| Additional Information | with central slave cylinder |
| Function | Clutch Kit |
| Extra Description | LuK RepSet Pro |
| Type | Clutch Kit |
Additional Information
- 1x LuK Central Slave Cylinder, clutch (510016410)
- 1x LuK Clutch Kit (622312709)
Important compatibility info
| Net weight | 0.450 kg |
| Extra Description | Fuel Parts |
| Function | Nozzle and Holder Assembly |
| Manufacturer Restriction | Bosch |
| Housing Colour | Black |
| Number of Inlets / Outlets | 1 |
| Weight | 0.558 kg |
| Type | Nozzle and Holder Assembly |
Important compatibility info
| Net weight | 0.450 kg |
| Extra Description | Fuel Parts |
| Function | Nozzle and Holder Assembly |
| Manufacturer Restriction | Bosch |
| Housing Colour | Black |
| Number of Inlets / Outlets | 1 |
| Weight | 0.558 kg |
| Type | Nozzle and Holder Assembly |
Important compatibility info
Important compatibility info
| Extra Description | Approved |
| Product met | Euro 4 |
| To be used with part number(s) | FK80414 |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Placement on Vehicle | Rear |
| Material | Ceramic |
Important compatibility info
| Extra Description | Approved |
| Product met | Euro 4 |
| To be used with part number(s) | FK80414 |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Placement on Vehicle | Rear |
| Material | Ceramic |
Important compatibility info
| Clamp | 30,50 |
| Position / Degree | rechts ° |
| Length | 216 mm |
| Voltage | 12 V |
| Rotation Direction | Anticlockwise rotation |
| Connecting Angle | 45 ° |
| Function | Starter |
| Rated Power | 1.8 kW |
| Flange Diameter | 76 mm |
| Fastening hole angle measurement [Degree] | 45 ° |
| Bore Diameter 2 | 13 mm |
| Starter Type | Floating pinion |
| Pinion Rest Position | 62 mm |
| Type | Starter |
| Number of mounting bores | 2 |
| Bore Diameter | 12.5 mm |
Important compatibility info
| Clamp | 30,50 |
| Position / Degree | rechts ° |
| Length | 216 mm |
| Voltage | 12 V |
| Rotation Direction | Anticlockwise rotation |
| Connecting Angle | 45 ° |
| Function | Starter |
| Rated Power | 1.8 kW |
| Flange Diameter | 76 mm |
| Fastening hole angle measurement [Degree] | 45 ° |
| Bore Diameter 2 | 13 mm |
| Starter Type | Floating pinion |
| Pinion Rest Position | 62 mm |
| Type | Starter |
| Number of mounting bores | 2 |
| Bore Diameter | 12.5 mm |
Important compatibility info
| Number of Ribs | 8 |
| Voltage | 12 V |
| Pulleys | without belt pulley |
| Function | Alternator |
| Belt Pulley Diameter | 57 mm |
| Alternator Charge Current | 150 A |
| Manufacturer Restriction | Denso |
| Type | Alternator |
Important compatibility info
| Number of Ribs | 8 |
| Voltage | 12 V |
| Pulleys | without belt pulley |
| Function | Alternator |
| Belt Pulley Diameter | 57 mm |
| Alternator Charge Current | 150 A |
| Manufacturer Restriction | Denso |
| Type | Alternator |
Important compatibility info
| Inspection Tag | E9-103R |
| Material | Ceramic |
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Product met | Euro 4 |
| Placement on Vehicle | Front |
| To be used with part number(s) | FK80424 |
Important compatibility info
| Inspection Tag | E9-103R |
| Material | Ceramic |
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Product met | Euro 4 |
| Placement on Vehicle | Front |
| To be used with part number(s) | FK80424 |
Important compatibility info
| Net weight | 0.036 kg |
| Function | Injector Nozzle |
| Connector Shape | Rectangular |
| Housing Colour | Black |
| Colour | Black |
| Number of Poles | 2 -pin connector |
| Type | Injector Nozzle |
| Weight | 0.150 kg |
Important compatibility info
| Net weight | 0.036 kg |
| Function | Injector Nozzle |
| Connector Shape | Rectangular |
| Housing Colour | Black |
| Colour | Black |
| Number of Poles | 2 -pin connector |
| Type | Injector Nozzle |
| Weight | 0.150 kg |
Important compatibility info
| Voltage | 12 V |
| Alternator Charge Current | 140 A |
| Type | Alternator |
| Function | Alternator |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
Important compatibility info
| Voltage | 12 V |
| Alternator Charge Current | 140 A |
| Type | Alternator |
| Function | Alternator |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
Important compatibility info
| Rated Power | 1.7 kW |
| Fastening hole angle measurement [Degree] | 44 ° |
| Starter Type | Floating pinion |
| Bore Diameter 3 | 12.5 mm |
| Bore Diameter 2 | 12.5 mm |
| Pinion Rest Position | 52.4 mm |
| Connecting Angle | 44 ° |
| Clamp | 50, 30 |
| Position / Degree | links ° |
| Flange Diameter | 76.2 mm |
| Number of mounting bores | 3 |
| Rotation Direction | Anticlockwise rotation |
| Bore Diameter | 12.5 mm |
| Length | 246 mm |
| Voltage | 12 V |
| Function | Starter |
| Type | Starter |
| Number of Teeth | 12. 11 |
Important compatibility info
| Rated Power | 1.7 kW |
| Fastening hole angle measurement [Degree] | 44 ° |
| Starter Type | Floating pinion |
| Bore Diameter 3 | 12.5 mm |
| Bore Diameter 2 | 12.5 mm |
| Pinion Rest Position | 52.4 mm |
| Connecting Angle | 44 ° |
| Clamp | 50, 30 |
| Position / Degree | links ° |
| Flange Diameter | 76.2 mm |
| Number of mounting bores | 3 |
| Rotation Direction | Anticlockwise rotation |
| Bore Diameter | 12.5 mm |
| Length | 246 mm |
| Voltage | 12 V |
| Function | Starter |
| Type | Starter |
| Number of Teeth | 12. 11 |
Important compatibility info
| Function | NOx Sensor, urea injection |
| Type | NOx Sensor, urea injection |
| Cable Length | 590 mm |
| Number of Connectors / Ports | 4 |
| Placement on Vehicle | before catalytic converter |
| Voltage | 24 V |
| for OE number | 008 153 98 28 |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















