Important compatibility info
| Diameter | 228 mm |
| Number of Teeth | 18 |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Extra Description | Kit plus CSC |
| Alternative Repair Kit | 3000 950 062 |
Additional Information
- 1x Sachs Central Slave Cylinder, clutch (3182654319)
- 1x Sachs Clutch Kit (3000950062)
- 1x Sachs Grease (4200080060)
Important compatibility info
| Diameter | 228 mm |
| Number of Teeth | 18 |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Extra Description | Kit plus CSC |
| Alternative Repair Kit | 3000 950 062 |
Additional Information
- 1x Sachs Central Slave Cylinder, clutch (3182654319)
- 1x Sachs Clutch Kit (3000950062)
- 1x Sachs Grease (4200080060)
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Teeth, Diff.Side | 25 |
| Length | 807 mm |
| External Teeth, Wheel Side | 27 |
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Teeth, Diff.Side | 25 |
| Length | 807 mm |
| External Teeth, Wheel Side | 27 |
Important compatibility info
| Type | Hydraulic Pump, steering |
| for steering manufacturer | SAGINAW |
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| Additional Information 2 | Belt Pulley pressed on |
| Pulleys | without belt pulley |
| Belt Pulley Diameter | 114 mm |
| Number of grooves | 6 |
Important compatibility info
| Type | Hydraulic Pump, steering |
| for steering manufacturer | SAGINAW |
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| Additional Information 2 | Belt Pulley pressed on |
| Pulleys | without belt pulley |
| Belt Pulley Diameter | 114 mm |
| Number of grooves | 6 |
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Outer diameter | 170 mm. 192 mm |
| Number of Holes | 4 |
| Number of Ribs | 8 |
| Parameter | 4PK + 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (27340)
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Outer diameter | 170 mm. 192 mm |
| Number of Holes | 4 |
| Number of Ribs | 8 |
| Parameter | 4PK + 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (27340)
Important compatibility info
| Oil Fill Quantity | 135 ml |
| Function | Compressor, air conditioning |
| Manufacturer Restriction | SANDEN-EQUIVALENT |
| Cylinder Head ID (Compressor) | VGN |
| Number of grooves | 7 |
| Compressor Oil | PAG 46 |
| Compressor ID | SD6V12 |
| Refrigerant | R 1234yf, R 134a |
| Outlet Diameter | 15.5 mm |
| Inlet Diameter | 21.4 mm |
| Belt Pulley Diameter | 125 mm |
| Pulleys | with v-ribbed belt pulley |
| Additional Information 2 | with PAG compressor oil, with seal ring |
| Connector Shape | rectangular |
| Voltage | 12 V |
| Extra Description | EASY FIT |
| Type | Compressor, air conditioning |
| Quality | OE-EQUIVALENT |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Oil Fill Quantity | 135 ml |
| Function | Compressor, air conditioning |
| Manufacturer Restriction | SANDEN-EQUIVALENT |
| Cylinder Head ID (Compressor) | VGN |
| Number of grooves | 7 |
| Compressor Oil | PAG 46 |
| Compressor ID | SD6V12 |
| Refrigerant | R 1234yf, R 134a |
| Outlet Diameter | 15.5 mm |
| Inlet Diameter | 21.4 mm |
| Belt Pulley Diameter | 125 mm |
| Pulleys | with v-ribbed belt pulley |
| Additional Information 2 | with PAG compressor oil, with seal ring |
| Connector Shape | rectangular |
| Voltage | 12 V |
| Extra Description | EASY FIT |
| Type | Compressor, air conditioning |
| Quality | OE-EQUIVALENT |
Additional Information
Technical Information
Prefilled with the correct type of oil. The amount must be appropriately chosen for the application.
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Number of Teeth | 211 |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB597)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT1225)
- 1x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT486)
- 1x Quinton Hazell Water Pump, engine cooling (QCP3359)
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Number of Teeth | 211 |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB597)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT1225)
- 1x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT486)
- 1x Quinton Hazell Water Pump, engine cooling (QCP3359)
Important compatibility info
| Inspection Tag | E9-103R |
| To be used with part number(s) | FK80334 |
| Extra Description | Approved |
| Product met | Euro 4 |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Material | Ceramic |
Important compatibility info
| Inspection Tag | E9-103R |
| To be used with part number(s) | FK80334 |
| Extra Description | Approved |
| Product met | Euro 4 |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Material | Ceramic |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 67 mm |
| Outer diameter | 336 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 22 mm |
| Number of Holes | 5 |
| Minimum thickness | 20.6 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Machining | High-carbon |
| Tightening Torque | 120 Nm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | XTRA LINE - Xtra |
| Rotor Style | perforated/vented |
Additional Information
General Information
The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 67 mm |
| Outer diameter | 336 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 22 mm |
| Number of Holes | 5 |
| Minimum thickness | 20.6 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Machining | High-carbon |
| Tightening Torque | 120 Nm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | XTRA LINE - Xtra |
| Rotor Style | perforated/vented |
Additional Information
General Information
The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
| Extra Description | febi Plus |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 722 mm |
| Function | Shock Absorber |
| Pipe Diameter | 64 mm. 75 mm |
| Mounting points diameter | 20 mm |
| Type | Shock Absorber |
| Min. Length | 476 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
| Extra Description | febi Plus |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 722 mm |
| Function | Shock Absorber |
| Pipe Diameter | 64 mm. 75 mm |
| Mounting points diameter | 20 mm |
| Type | Shock Absorber |
| Min. Length | 476 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Fastening Type | Double Pivot Lever |
| Number of grooves | 1 |
| Function | Alternator |
| Alternator Charge Current | 27 A |
| Rotation Direction | Clockwise rotation |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Belt Pulley Diameter | 95 mm |
| Alternator type | excl. vacuum pump |
| Distance from pulley to alternator | 45 mm |
| Voltage | 28 V |
| Pulleys | with belt pulley |
| Length | 156 mm |
| Type | Alternator |
| Clamp | B+(M6),D+ |
| Replaces | 0986032191 |
Important compatibility info
| Fastening Type | Double Pivot Lever |
| Number of grooves | 1 |
| Function | Alternator |
| Alternator Charge Current | 27 A |
| Rotation Direction | Clockwise rotation |
| Recommended additional repairs | V-Belt/V-Ribbed Belt |
| Belt Pulley Diameter | 95 mm |
| Alternator type | excl. vacuum pump |
| Distance from pulley to alternator | 45 mm |
| Voltage | 28 V |
| Pulleys | with belt pulley |
| Length | 156 mm |
| Type | Alternator |
| Clamp | B+(M6),D+ |
| Replaces | 0986032191 |
Important compatibility info
| Function | Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5235XS)
- 1x Gates Timing Belt (5480XS)
- 1x Gates Tensioner Pulley, timing belt (T41013)
- 1x Gates Tensioner Pulley, timing belt (T41014)
Important compatibility info
| Function | Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5235XS)
- 1x Gates Timing Belt (5480XS)
- 1x Gates Tensioner Pulley, timing belt (T41013)
- 1x Gates Tensioner Pulley, timing belt (T41014)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 76 mm |
| Length 1/ Length 2 | 694/682 mm |
| Spring Design | Leaf spring, Parabolic Spring |
| Function | Spring Pack |
| Number of spring leaves | 2 |
| Type | Spring Pack |
| Part number of recommended accessories | 77831 |
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 76 mm |
| Length 1/ Length 2 | 694/682 mm |
| Spring Design | Leaf spring, Parabolic Spring |
| Function | Spring Pack |
| Number of spring leaves | 2 |
| Type | Spring Pack |
| Part number of recommended accessories | 77831 |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Alternator Charge Current | 125 A |
| Belt Pulley Diameter | 49 mm |
| Function | Alternator |
| for OE number | SG12B050 |
| Type | Alternator |
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Alternator Charge Current | 125 A |
| Belt Pulley Diameter | 49 mm |
| Function | Alternator |
| for OE number | SG12B050 |
| Type | Alternator |
Important compatibility info
| Inspection Tag | E9-103R |
| Includes fitting kit | FK91054B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| To be used with part number(s) | FK91054 |
| Product met | Euro 3 |
| Material | Ceramic |
Important compatibility info
| Inspection Tag | E9-103R |
| Includes fitting kit | FK91054B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| To be used with part number(s) | FK91054 |
| Product met | Euro 3 |
| Material | Ceramic |
Important compatibility info
| Net weight | 2.172 kg |
| Function | Cooler, exhaust gas recirculation |
| Cooling Type | Water-cooled |
| Material | Metal |
| Additional Information | without gasket/seal |
| Weight | 2.384 kg |
| Type | Cooler, exhaust gas recirculation |
Important compatibility info
| Net weight | 2.172 kg |
| Function | Cooler, exhaust gas recirculation |
| Cooling Type | Water-cooled |
| Material | Metal |
| Additional Information | without gasket/seal |
| Weight | 2.384 kg |
| Type | Cooler, exhaust gas recirculation |
Important compatibility info
Important compatibility info
| Function | Fuel Feed Unit |
| Housing Colour | White |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Additional Information | with fuel sender unit |
| Weight | 0.5 kg |
| Type | Fuel Feed Unit |
| Net weight | 0.754 kg |
Important compatibility info
| Function | Fuel Feed Unit |
| Housing Colour | White |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Additional Information | with fuel sender unit |
| Weight | 0.5 kg |
| Type | Fuel Feed Unit |
| Net weight | 0.754 kg |
Important compatibility info
| Operating Mode | Electric |
| Plug Type | Male |
| Number of Pins | 4 |
| Function | Water Pump, engine cooling |
| Extra Description | ThermalPro™ |
| Pin Shape | Flat |
| Type | Water Pump, engine cooling |
| Number of Inlets / Outlets | 2 |
Important compatibility info
| Operating Mode | Electric |
| Plug Type | Male |
| Number of Pins | 4 |
| Function | Water Pump, engine cooling |
| Extra Description | ThermalPro™ |
| Pin Shape | Flat |
| Type | Water Pump, engine cooling |
| Number of Inlets / Outlets | 2 |
Important compatibility info
| Type | Front Fog Light |
| Function | Front Fog Light |
Important compatibility info
| Type | Front Fog Light |
| Function | Front Fog Light |
Important compatibility info
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Exhaust Side |
| Inner diameter | 13 mm |
| Number of Teeth | 38 |
| Function | Camshaft Adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Exhaust Side |
| Inner diameter | 13 mm |
| Number of Teeth | 38 |
| Function | Camshaft Adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | EGR Valve |
| Net weight | 0.678 kg |
| Operating Mode | Pneumatic |
| Material | Metal |
| Additional Information | without gasket/seal |
| Weight | 0.818 kg |
| for OE number | 7 792 077 |
| Manufacturer Restriction | Pierburg |
| Type | EGR Valve |
Important compatibility info
| Function | EGR Valve |
| Net weight | 0.678 kg |
| Operating Mode | Pneumatic |
| Material | Metal |
| Additional Information | without gasket/seal |
| Weight | 0.818 kg |
| for OE number | 7 792 077 |
| Manufacturer Restriction | Pierburg |
| Type | EGR Valve |
Important compatibility info
| Core Width | 449 mm |
| Core Depth | 16 mm |
| Net Weight | 2300 g |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Additional Information 2 | with dryer |
| Radiator type | Parallel cooling pipes |
| Extra Description | BEHR *** PREMIUM LINE *** |
| Core Length | 490 mm |
| Manufacturer | MAHLE |
| Packaging width | 12.00 cm |
| Packaging height | 48.00 cm |
| Packaging length | 83.5 cm |
Additional Information
General Information
PREMIUM LINE - OE Quality for customers expecting the optimum
General Information
The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
Important compatibility info
| Core Width | 449 mm |
| Core Depth | 16 mm |
| Net Weight | 2300 g |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Additional Information 2 | with dryer |
| Radiator type | Parallel cooling pipes |
| Extra Description | BEHR *** PREMIUM LINE *** |
| Core Length | 490 mm |
| Manufacturer | MAHLE |
| Packaging width | 12.00 cm |
| Packaging height | 48.00 cm |
| Packaging length | 83.5 cm |
Additional Information
General Information
PREMIUM LINE - OE Quality for customers expecting the optimum
General Information
The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
Important compatibility info
| Additional Information | without water pump |
| Function | Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5556XS)
- 1x Gates Timing Belt (5570XS)
- 1x Gates Tensioner Pulley, timing belt (T41087)
- 1x Gates Tensioner Pulley, timing belt (T41038)
- 1x Gates Deflection Pulley/Guide Pulley, timing belt (T42017)
- 1x Gates Vibration Damper, timing belt (T43178)
Important compatibility info
| Additional Information | without water pump |
| Function | Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5556XS)
- 1x Gates Timing Belt (5570XS)
- 1x Gates Tensioner Pulley, timing belt (T41087)
- 1x Gates Tensioner Pulley, timing belt (T41038)
- 1x Gates Deflection Pulley/Guide Pulley, timing belt (T42017)
- 1x Gates Vibration Damper, timing belt (T43178)
Important compatibility info
| Placement on Vehicle | behind the axle, Rear Axle Right |
| Material | Grey Cast Iron |
| Brake Disc Thickness | 12 mm |
| Brake System | BREMBO |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | F BR 082 |
| for brake disc diameter | 305 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Extra Description | PRIME LINE |
| Piston Diameter | 48 mm |
Important compatibility info
| Placement on Vehicle | behind the axle, Rear Axle Right |
| Material | Grey Cast Iron |
| Brake Disc Thickness | 12 mm |
| Brake System | BREMBO |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | F BR 082 |
| for brake disc diameter | 305 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Extra Description | PRIME LINE |
| Piston Diameter | 48 mm |
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 4 |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 4 |
| Type | Catalytic Converter |
Additional Information
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























