Important compatibility info
| Function | Auxiliary water pump (heating water circuit) |
| Port / Connector type | 2 PIN |
| Operating Mode | Electronic |
| Type | Auxiliary water pump (heating water circuit) |
| Voltage | 12 V |
Important compatibility info
| Function | Auxiliary water pump (heating water circuit) |
| Port / Connector type | 2 PIN |
| Operating Mode | Electronic |
| Type | Auxiliary water pump (heating water circuit) |
| Voltage | 12 V |
Important compatibility info
| Extra Description | ORIGINAL PART |
| Placement on Vehicle | Front |
| Voltage | 24 V |
| Function | Wiper Motor |
| Weight | 1.88 kg |
| Type | Wiper Motor |
Important compatibility info
| Extra Description | ORIGINAL PART |
| Placement on Vehicle | Front |
| Voltage | 24 V |
| Function | Wiper Motor |
| Weight | 1.88 kg |
| Type | Wiper Motor |
Important compatibility info
| Height | 81 mm |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 7 |
| Function | Throttle body |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 81 mm |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 7 |
| Function | Throttle body |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with bearing |
| Extra Description | 3-1 Kit |
| Type | Clutch Kit |
| Hub Profile | 19,7 |
| Number of Teeth | 23 |
| Friction Lining Outer Diameter | 160 mm |
| Function | Clutch Kit |
Additional Information
- 1x Quinton Hazell Clutch Release Bearing (CCT600)
Important compatibility info
| Additional Information 2 | with bearing |
| Extra Description | 3-1 Kit |
| Type | Clutch Kit |
| Hub Profile | 19,7 |
| Number of Teeth | 23 |
| Friction Lining Outer Diameter | 160 mm |
| Function | Clutch Kit |
Additional Information
- 1x Quinton Hazell Clutch Release Bearing (CCT600)
Important compatibility info
| Operating Mode | Pneumatic |
| Function | EGR Valve |
| Type | EGR Valve |
Important compatibility info
| Operating Mode | Pneumatic |
| Function | EGR Valve |
| Type | EGR Valve |
Important compatibility info
| Outer diameter | 132 mm |
| Outer diameter 1 | 67 mm |
| Placement on Vehicle | Rear Axle |
| Additional Information | Photo corresponds to scope of supply |
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 62.5 mm |
| Width 2 | 59 mm |
| Type | Wheel Bearing Kit |
Important compatibility info
| Outer diameter | 132 mm |
| Outer diameter 1 | 67 mm |
| Placement on Vehicle | Rear Axle |
| Additional Information | Photo corresponds to scope of supply |
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 62.5 mm |
| Width 2 | 59 mm |
| Type | Wheel Bearing Kit |
Important compatibility info
| Function | Starter |
| Rated Power | 1.7 kW |
| Type | Starter |
| Manufacturer Restriction | Bosch |
| Voltage | 12 V |
Important compatibility info
| Function | Starter |
| Rated Power | 1.7 kW |
| Type | Starter |
| Manufacturer Restriction | Bosch |
| Voltage | 12 V |
Important compatibility info
| Weight | 5.076 kg |
| Number of mounting bores at central releaser | 3 |
| Material | Plastic |
| Function | Clutch Kit |
| Hub Profile | 26,5 x 23,2 |
| Bore Diameter | 32 mm |
| Number of Teeth | 23 |
| Additional Information 2 | without sensor |
| Additional Information | with central slave cylinder |
| Extra Description | KIT3P (CSC) with High Efficiency Clutch |
| External diameter, clutch pressure plate | 228 mm |
| Type | Clutch Kit |
| Replaces | 834156 |
Additional Information
- 1x Valeo Clutch Kit (826489)
- 1x Valeo Central Slave Cylinder, clutch (810080)
Important compatibility info
| Weight | 5.076 kg |
| Number of mounting bores at central releaser | 3 |
| Material | Plastic |
| Function | Clutch Kit |
| Hub Profile | 26,5 x 23,2 |
| Bore Diameter | 32 mm |
| Number of Teeth | 23 |
| Additional Information 2 | without sensor |
| Additional Information | with central slave cylinder |
| Extra Description | KIT3P (CSC) with High Efficiency Clutch |
| External diameter, clutch pressure plate | 228 mm |
| Type | Clutch Kit |
| Replaces | 834156 |
Additional Information
- 1x Valeo Clutch Kit (826489)
- 1x Valeo Central Slave Cylinder, clutch (810080)
Important compatibility info
| Function | Mass Air Flow Sensor |
| Housing Type | with housing |
| Connector Shape | Rectangular |
| Number of Poles | 6 -pin connector |
| Additional Information 2 | with integrated air temperature sensor |
| Weight | 0.300 kg |
| Type | Mass Air Flow Sensor |
| Manufacturer Restriction | Siemens |
| for OE number | 82 00 203 767 |
| Diameter 1 | 81 mm |
| Diameter 2 | 81 mm |
| Housing Colour | Black |
| Housing Diameter | 76 mm |
| Housing length | 104 mm |
| Net weight | 0.196 kg |
Important compatibility info
| Function | Mass Air Flow Sensor |
| Housing Type | with housing |
| Connector Shape | Rectangular |
| Number of Poles | 6 -pin connector |
| Additional Information 2 | with integrated air temperature sensor |
| Weight | 0.300 kg |
| Type | Mass Air Flow Sensor |
| Manufacturer Restriction | Siemens |
| for OE number | 82 00 203 767 |
| Diameter 1 | 81 mm |
| Diameter 2 | 81 mm |
| Housing Colour | Black |
| Housing Diameter | 76 mm |
| Housing length | 104 mm |
| Net weight | 0.196 kg |
Important compatibility info
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
| Function | Wheel Bearing Kit |
| Extra Description | PROformer |
Important compatibility info
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle |
| Function | Wheel Bearing Kit |
| Extra Description | PROformer |
Important compatibility info
| Operating Mode | Electric |
| Valve type | Control Valve |
| Replaces | 7.03196.02.0; 7.03196.01.0 |
| Additional Information | with gasket/seal |
| Function | EGR Valve |
| Type | EGR Valve |
Important compatibility info
| Operating Mode | Electric |
| Valve type | Control Valve |
| Replaces | 7.03196.02.0; 7.03196.01.0 |
| Additional Information | with gasket/seal |
| Function | EGR Valve |
| Type | EGR Valve |
Important compatibility info
| Articles contained in addition to the OE set | Sprocket/Gear, oil pump |
| Number of belts | 1 |
| Function | Timing Belt Kit |
| Additional Information | with camshaft sprocket |
| Type | Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB643)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT1000)
- 1x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT1023)
- 1x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT879)
- 1x Quinton Hazell Gear/Sprocket, camshaft (QTT1095)
Important compatibility info
| Articles contained in addition to the OE set | Sprocket/Gear, oil pump |
| Number of belts | 1 |
| Function | Timing Belt Kit |
| Additional Information | with camshaft sprocket |
| Type | Timing Belt Kit |
Additional Information
- 1x Quinton Hazell Timing Belt (QTB643)
- 1x Quinton Hazell Tensioner Pulley, timing belt (QTT1000)
- 1x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT1023)
- 1x Quinton Hazell Deflection Pulley/Guide Pulley, timing belt (QTT879)
- 1x Quinton Hazell Gear/Sprocket, camshaft (QTT1095)
Important compatibility info
| Function | EGR Valve |
| Type | EGR Valve |
| Additional Information | with gaskets/seals |
| for OE number | 28410-27410 |
| Number of Connectors / Ports | 2 |
| Connector Shape | oval |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | EGR Valve |
| Type | EGR Valve |
| Additional Information | with gaskets/seals |
| for OE number | 28410-27410 |
| Number of Connectors / Ports | 2 |
| Connector Shape | oval |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Belt Pulley Diameter | 120 mm |
| Refrigerant | R 134a |
| Oil Fill Quantity | 200 ml |
| Number of grooves | 7 |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Belt Pulley Diameter | 120 mm |
| Refrigerant | R 134a |
| Oil Fill Quantity | 200 ml |
| Number of grooves | 7 |
| Type | Compressor, air conditioning |
| Function | Compressor, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Rated Power | 2.5 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 37 ° |
| Jaw opening angle measurement [Degree] | 60 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | 1 mm |
| Connecting Angle | 37 ° |
| Clamp | 30,50 |
| Position / Degree | links ° |
| Number of Thread Bores | 3 |
| Flange Diameter | 82 mm |
| Rotation Direction | Clockwise rotation |
| Thread Measurement 2 | M8x1.25 |
| Thread Measurement 1 | M8x1.25 |
| Number of Teeth | 9 |
| Thread Size | M8x1.25 |
| Length | 246 mm |
| Type | Starter |
Important compatibility info
| Voltage | 12 V |
| Rated Power | 2.5 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 37 ° |
| Jaw opening angle measurement [Degree] | 60 ° |
| Starter Type | Self-supporting |
| Pinion Rest Position | 1 mm |
| Connecting Angle | 37 ° |
| Clamp | 30,50 |
| Position / Degree | links ° |
| Number of Thread Bores | 3 |
| Flange Diameter | 82 mm |
| Rotation Direction | Clockwise rotation |
| Thread Measurement 2 | M8x1.25 |
| Thread Measurement 1 | M8x1.25 |
| Number of Teeth | 9 |
| Thread Size | M8x1.25 |
| Length | 246 mm |
| Type | Starter |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023














