Important compatibility info
Number of Connectors / Ports | 5 |
Housing Type | with housing |
Type | Mass Air Flow Sensor |
Resistor Type | Hot-film Sensor |
Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | after soot particulate filter |
Number of Connectors / Ports | 3 |
Type | Sensor, exhaust pressure |
Function | Sensor, exhaust pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower, Rear |
Material | Sheet Steel |
Additional Information 2 | with bearing |
Steering arm type | Trailing Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information | with rubber mounts |
Material | Steel |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Type | with right-hand thread |
Placement on Vehicle | Front Axle |
Length | 141 mm |
Additional Information 2 | with crown nut |
Type | Angled Ball Joint, steering push rod / Tie Rod End |
Function | Angled Ball Joint, steering push rod / Tie Rod End |
Extra Description | ProKit |
External Thread Size | M30 x 1,5 |
Internal Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Push Rod |
Function | Centre Rod Assembly |
Additional Information | with nuts |
Type | Centre Rod Assembly |
Length | 1030 mm |
Extra Description | ProKit |
Thread Size | M24 x 1,5 |
Placement on Vehicle | Front Axle |
Adjustable | Adjustable on both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Centre Rod Assembly |
Length | 1023 mm |
Placement on Vehicle | Front Axle |
Rod/Strut | Push Rod |
Function | Centre Rod Assembly |
Adjustable | Adjustable on both sides |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Pipe Diameter | 42 mm |
External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 13 mm |
Outer diameter | 180 mm |
Type | Protection Lid, wheel hub |
Function | Protection Lid, wheel hub |
Bolt Hole Circle Diameter | 160 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 885 mm |
Additional Information 2 | with crown nut |
Rod/Strut | Push Rod |
Cone Size | 22 mm |
Adjustable | Adjustable on one side |
Pipe Diameter | 38 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Cable Pull, manual transmission |
for OE number | 6R0 711 266 D |
Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Outer diameter | 146 mm |
Thickness | 35 mm |
Bolt Hole Circle Diameter | 105 mm |
Type | Joint, propshaft |
Function | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Inner length 1 | 881 mm |
Inner length 2 | 962 mm |
Outer length 1 | 1159 mm |
Outer length 2 | 1255 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Holder, wheel speed sensor |
Material | Aluminium |
Function | Holder, wheel speed sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides, Rear |
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Timing Chain Kit |
Extra Description | Basic Short Kit |
Type | Timing Chain Kit |
for OE number | 13506-33030 S1 |
Number of Chain Links | 106 |
Chain Type | Simplex, Closed chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (194606)
- 1x Febi Tensioner, timing chain (180601)
- 1x Febi Guide, timing chain (180871)
- 1x Febi Guide, timing chain (181069)
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 194328 |
Placement on Vehicle | Rear Axle Left, Lower, Rear |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 98 mm |
Outer diameter | 73 mm |
Additional Information 2 | with seal ring |
Inner diameter | 37 mm |
Filter type | Filter Insert |
Type | Fuel Filter |
Function | Fuel Filter |
Gasket outer diameter | 91.2 mm |
Gasket inner diameter | 84 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | without ball bearing |
Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Rubber Buffer, suspension |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Length | 134 mm |
Width | 109 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Type | Ignition Switch |
Function | Ignition Switch |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3. 4 |
Type | Ignition Switch |
Function | Ignition Switch |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 63 mm |
Width | 48 mm |
Inner diameter | 22 mm |
Placement on Vehicle | Front Axle Left, outer, Front Axle Right |
Type | Mounting, stabiliser bar |
Thickness | 53 mm |
Function | Mounting, stabiliser bar |
Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 51 mm |
Thickness | 63 mm |
Length | 60 mm |
Inner diameter | 24 mm |
Material | Rubber |
Function | Mounting, stabiliser bar |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 18.3 mm |
Material | Steel |
Outer diameter | 27 mm |
Additional Information 2 | without seal ring |
Spanner Size | 10 |
Surface | Zinc-coated |
Thread Length | 11.5 mm |
Bolt Head/Nut Design | Hexagon Socket |
Type | Screw Plug, manual transmission casing |
Function | Screw Plug, manual transmission casing |
Screw length below head | 15 mm |
External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | behind the axle, Front Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (4 pistons) |
Paired article numbers | 194737 |
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 45.34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | behind the axle, Front Axle Right |
Paired article numbers | 194736 |
Function | Brake Caliper |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (4 pistons) |
Brake caliper piston diameter | 45.34 mm |
Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 194738 |
Extra Description | febi Plus |
Function | Control Element, parking brake caliper |
Number of Connectors / Ports | 2 |
Type | Control Element, parking brake caliper |
Number of Teeth | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 12. 4. 14 |
Type | Clock Spring, airbag |
Function | Clock Spring, airbag |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Number of Connectors / Ports | 2 |
Type | Sender Unit, fuel tank |
Function | Sender Unit, fuel tank |
Screw length below head | 533 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control Element, parking brake caliper |
Type | Control Element, parking brake caliper |
Placement on Vehicle | Rear Axle Left |
Extra Description | febi Plus |
Number of Connectors / Ports | 2 |
Paired article numbers | 194745 |
Number of Teeth | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control Element, parking brake caliper |
Number of Connectors / Ports | 2 |
Placement on Vehicle | Rear Axle Right |
Extra Description | febi Plus |
Type | Control Element, parking brake caliper |
Paired article numbers | 194744 |
Number of Teeth | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 5 |
Type | Sensor, fuel temperature |
Function | Sensor, fuel temperature |
Colour | black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Type | Sensor, exhaust pressure |
Function | Sensor, exhaust pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Right, Rear Axle Right |
Length | 87 mm |
Material | Rubber/Metal |
Outer diameter | 67 mm |
Inner diameter | 17 mm |
Type | Bushing, leaf spring |
Function | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Outer diameter | 62 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Rear |
Type | Bushing, leaf spring |
Inner diameter | 14 mm |
Length | 74 mm |
Function | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting, stabiliser bar |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Inner diameter | 21 mm |
Function | Mounting, stabiliser bar |
Material | Rubber/Metal |
Length | 48 mm |
Width | 44 mm |
Thickness | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Timing Chain Kit |
Number of Chain Links | 110 |
Timing Chain Size | G67HR-6 |
Extra Description | Standard Medium Kit |
Chain Type | Simplex, Closed chain |
Type | Timing Chain Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (186500)
- 1x Febi Tensioner, timing chain (186176)
- 1x Febi Guide, timing chain (186178)
- 1x Febi Guide, timing chain (186179)
- 1x Febi Gear/Sprocket, camshaft (186180)
- 1x Febi Sprocket, crankshaft (186380)
- 1x Febi Shaft Seal, crankshaft (194658)
Important compatibility info
Type | Urea Hose |
Hose Length | 1272 mm |
Function | Urea Hose |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Type | Ignition Coil |
Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right, Charge Air Cooler |
Material | FKM (fluorocarbon rubber), Silicone |
Inner diameter 1 | 45 mm |
Inner diameter 2 | 43 mm |
Type | Charge Air Hose |
Wall Thickness | 5.5 mm |
Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 176 mm |
Material | Thermoplastic polyester elastomer |
Additional Information 2 | with clamps |
Inner diameter 1 | 16 mm |
Inner diameter 2 | 56 mm |
Type | Bellow Kit, steering |
Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 58 mm |
Width | 68 mm |
Material | PU (Polyurethane) |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Pedal Pad, clutch pedal |
Extra Description | febi Plus |
Width | 45 mm |
Length | 97 mm |
Type | Pedal Pad, clutch pedal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 615 mm |
Height | 40 mm |
Width | 431 mm |
Filter type | Activated Carbon Filter, High efficiency air filter (HEPA) |
Paired article numbers | 194788 |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 200 mm |
Height | 36 mm |
Width | 193 mm |
Additional Information 2 | with oil sump gasket |
Filter type | Screen Filter |
Type | Hydraulic Filter Kit, automatic transmission |
Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 600 mm |
Height | 22 mm |
Width | 413 mm |
Filter type | Pollen Filter, Pre-Filter |
Paired article numbers | 194786 |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Gasket, cylinder head cover |
Material | ACM (Polyacrylate) |
Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 1900 010 |
Material | ACM (Polyacrylate) |
Type | Gasket, cylinder head cover |
Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Shoe Set |
Inspection Tag | ECE R90 |
Placement on Vehicle | Rear Axle |
Function | Brake Shoe Set |
Thickness/Strength 1 | 4.3 mm |
Width | 32 mm |
Outer diameter | 200 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control Element, parking brake caliper |
Type | Control Element, parking brake caliper |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Extra Description | febi Plus |
Number of Connectors / Ports | 3 |
Number of Teeth | 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023