Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 82 mm |
| Material | Rubber |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 75 mm |
| Function | Bellow, drive shaft |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.34
Important compatibility info
| Thread Length | 55 mm |
| Quality/ Grade | 10.9 |
| Shaft Length | 21 mm |
| Length | 92 mm |
| Material | Steel |
| Placement on Vehicle | Front Axle, Rear Axle |
| Bolt Head Diameter | 32 mm |
| Surface | Phosphatized |
| External Thread Size | M22 x 1,5 |
| Function | Wheel Stud |
| Screw length below head | 81 mm |
| Type | Wheel Stud |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.34
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Material | Steel |
| Knurl Diameter | 14.3 mm |
| Screw length below head | 42 mm |
| Function | Wheel Stud |
| Bolt Head Diameter | 18 mm |
| Quality/ Grade | 10.9 |
| Thread Length | 30 mm |
| Surface | Zinc-coated |
| Length | 47 mm |
| Type | Wheel Stud |
| Bolt / Nut Version | Knurled Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.34
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber |
| Thickness | 51 mm |
| Inner diameter | 27 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.34
Important compatibility info
| Type | Shaft Seal, differential |
| Function | Shaft Seal, differential |
| Material | ACM (Polyacrylate) |
| Outer diameter | 65 mm |
| Inner diameter | 50 mm |
| Height | 8 mm |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.34
Important compatibility info
| Height | 60 mm |
| Type | Oil Filter |
| Function | Oil Filter |
| Additional Information | with gaskets/seals |
| Inner diameter | 28 mm |
| Filter type | Filter Insert |
| Outer diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.34
Important compatibility info
| Placement on Vehicle | Left, Outer |
| Engine Management | Timing Chain |
| Function | Guide, timing chain |
| Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.34
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Clamping Bolt Set, ball joint |
| Type | Clamping Bolt Set, ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Securing Plate, ball joint (14238)
- 3x Febi Clamping Bolt, ball joint (07866)
£6.34
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Outer diameter | 58 mm. 28 mm |
| Thickness | 53 mm |
| Inner diameter | 12 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.33
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 52 mm. 32 mm |
| Thickness | 27 mm |
| Inner diameter | 18 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.33
Important compatibility info
| Material | Steel |
| Spanner Size | E14 |
| Thread Length | 85 mm |
| Bolt Head/Nut Design | Male Torx |
| Function | Cylinder Head Bolt |
| Screw length below head | 124 mm |
| Length | 136 mm |
| External Thread Size | M12 x 1,5 |
| Number of screws | 10 |
| Type | Cylinder Head Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.33
Important compatibility info
| Engine Management | Timing Chain |
| Function | Guide, timing chain |
| Type | Guide, timing chain |
| for OE number | 102 052 14 16 |
| Placement on Vehicle | Cylinder Head, Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.33
Important compatibility info
| Height | 87 mm |
| Outer diameter | 68 mm |
| Filter type | Spin-on Filter |
| Internal Thread Size | 3/4" - 16 UNF |
| Function | Oil Filter |
| Seal Diameter | 61.5 mm |
| Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.33
Important compatibility info
| Placement on Vehicle | Front Axle |
| Inner diameter | 26 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.33
Important compatibility info
| Internal Thread Size | 3/4" - 16 UNF |
| Height | 62 mm |
| Outer diameter | 76 mm |
| Filter type | Spin-on Filter |
| Type | Oil Filter |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.33
Important compatibility info
| Material | ACM (Polyacrylate) |
| Inner diameter | 13 mm |
| Function | Gasket, oil filter housing |
| Type | Gasket, oil filter housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.32
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Rubber |
| Inner diameter | 15 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.32
Important compatibility info
| Material | Rubber |
| Placement on Vehicle | Front Axle |
| Length | 48 mm |
| Width | 53 mm |
| Thickness | 48 mm |
| Inner diameter | 26 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.32
Important compatibility info
| Function | Radiator Hose |
| Cooling Hose | from heat exchanger to water pump |
| Inner diameter 2 | 16 mm |
| Inner diameter 1 | 23 mm |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.32
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | Rubber |
| Inner diameter | 21 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.32
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023