Important compatibility info
Material | Plastic |
Function | Coolant Flange |
Type | Coolant Flange |
for OE number | 055 121 121 F |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 82 mm |
Material | Rubber |
Inner diameter 1 | 30 mm |
Inner diameter 2 | 80 mm |
Function | Bellow, drive shaft |
Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | E 14 |
External Thread Size | M10 x 1,5 |
Surface | Phosphatized |
Thread Length | 92 mm |
Bolt Head/Nut Design | Male Torx |
Material | Steel |
Length | 134 mm |
Screw length below head | 122 mm |
Function | Cylinder Head Bolt |
Type | Cylinder Head Bolt |
Number of screws | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Filter |
Internal Thread Size | 3/4" - 16 UNF |
Type | Oil Filter |
Height | 120 mm |
Outer diameter | 77 mm |
Filter type | Spin-on Filter |
Seal Diameter | 71.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Filter |
Type | Oil Filter |
Height | 89 mm |
Outer diameter | 62 mm |
Filter type | Filter Insert |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Blue |
Function | Shaft Seal, wheel bearing |
Outer diameter | 136.7 mm |
Material | NBR (nitrile butadiene rubber) |
Placement on Vehicle | Front Axle, Rear Axle |
Thickness | 8 mm |
Inner diameter | 115 mm |
Type | Shaft Seal, wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 230 mm |
Width | 105 mm |
Filter type | Pollen Filter |
Height | 20 mm |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 46 mm |
Inner diameter | 25.5 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 46 mm |
Width | 49 mm |
Material | Rubber |
Thickness | 44 mm |
Inner diameter | 18.4 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Material | Rubber |
Inner diameter | 18 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 31 mm |
Bolt Head/Nut Design | External Hexagon |
Outer diameter | 30.3 mm |
Material | Steel |
Function | Wheel Bolt |
Wheel Fastening | Conical Seat F |
Quality/ Grade | 8.8 |
Thread Length | 26 mm |
Surface | Zink flake coated |
Spanner Size | 19 |
Length | 61 mm |
Placement on Vehicle | Front Axle, Rear Axle |
External Thread Size | M14 x 1,5 |
Rims | for light alloy rims, for steel rims |
Type | Wheel Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Screw length below head | 26 mm |
Bolt Head/Nut Design | External Hexagon |
Outer diameter | 23 mm |
Material | Steel |
Function | Wheel Bolt |
Wheel Fastening | Conical Seat F |
Quality/ Grade | 10.9 |
Thread Length | 20 mm |
Spanner Size | 17 |
Length | 57 mm |
Placement on Vehicle | Front Axle, Rear Axle |
Rims | for light alloy rims, for steel rims |
Type | Wheel Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Head/Nut Design | Male Torx |
Quality/ Grade | 10.9 |
Function | Screw |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Thread Length | 33 mm |
Screw length below head | 39 mm |
External Thread Size | M12 x 1,5 |
Type | Screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | ProKit |
Function | Radiator Hose |
Wall Thickness | 4 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Hose Length | 66 mm |
Type | Radiator Hose |
Inner diameter | 9 mm |
Additional Information 2 | with clamps |
Outer diameter | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Radiator Hose (101076)
- 2x Febi Clamping Clip (48277)
Important compatibility info
Placement on Vehicle | Rear Axle, inner |
Length | 53.5 mm |
Width | 48 mm |
Material | Rubber |
Outer diameter | 48 mm |
Thickness | 41.7 mm |
Inner diameter | 23 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | MVQ (silicone rubber) |
Function | Gasket, oil cooler |
Type | Gasket, oil cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 30 mm |
Function | Radiator Hose |
Outer diameter 1 | 25 mm |
Inner diameter 1 | 17 mm |
Type | Radiator Hose |
Cooling Hose | from oil cooler to engine block |
Inner diameter | 23 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 85 mm |
Thickness | 3 mm |
Inner diameter | 79 mm |
Type | Seal Ring, coolant pipe |
Function | Seal Ring, coolant pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 50 mm |
Width | 49 mm |
Material | Rubber |
Outer diameter | 48.5 mm |
Thickness | 47 mm |
Inner diameter | 19 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Cable Length | 260 mm |
Type | Warning Contact, brake pad wear |
Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Tightening Strap, wing |
Function | Tightening Strap, wing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 593 mm |
Type | Cable Pull, door release |
Function | Cable Pull, door release |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 21 mm |
Placement on Vehicle | Front Axle |
Extra Description | ProKit |
Additional Information | with holder |
Additional Information 2 | with screw |
Type | Mounting Kit, stabiliser bar |
Function | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, stabiliser bar (14718)
- 1x Febi Bracket, stabiliser mounting (23366)
- 1x Febi Fastening Bolt, stabiliser bar (29507)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 110 mm |
Material | Rubber |
Inner diameter 1 | 21 mm |
Inner diameter 2 | 34 mm |
Function | Bellow, steering |
Type | Bellow, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Width | 46 mm |
Material | Rubber |
Outer diameter | 65 mm |
Inner diameter | 27 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Rubber |
Function | Bellow, steering |
Inner diameter 2 | 46 mm |
Inner diameter 1 | 10 mm |
Length | 168 mm |
Type | Bellow, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Length | 55 mm |
Quality/ Grade | 10.9 |
Shaft Length | 21 mm |
Length | 92 mm |
Material | Steel |
Placement on Vehicle | Front Axle, Rear Axle |
Bolt Head Diameter | 32 mm |
Surface | Phosphatized |
External Thread Size | M22 x 1,5 |
Function | Wheel Stud |
Screw length below head | 81 mm |
Type | Wheel Stud |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 223 mm |
Height | 20 mm |
Width | 150 mm |
Filter type | Pollen Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 54 mm |
Thickness | 53 mm |
Inner diameter | 15.5 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 49 mm |
Width | 52 mm |
Material | Rubber |
Outer diameter | 52 mm |
Thickness | 48 mm |
Inner diameter | 19 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Valve type | for exhaust valves |
Type | Valve Guide |
Function | Valve Guide |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 24 mm |
Placement on Vehicle | Front Axle, inner |
Material | Rubber, Rubber with fabric lining |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 29 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side |
Length | 83 mm |
Material | Rubber |
Inner diameter 1 | 20 mm |
Inner diameter 2 | 65 mm |
Function | Bellow, drive shaft |
Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 200 mm |
Height | 42 mm |
Width | 165 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 115 mm |
Inner diameter | 31 mm |
Filter type | Filter Insert |
Type | Oil Filter |
Function | Oil Filter |
Outer diameter | 65 mm |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, stabiliser bar |
Inner diameter | 23 mm |
Material | Rubber |
Placement on Vehicle | Front Axle |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic, PA (polyamide) |
Outer diameter | 79 mm |
Inner diameter | 66.5 mm |
Colour | Black |
Type | Intake Hose, air filter |
Hose Length | 30 mm |
Function | Intake Hose, air filter |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bearing, selector-/shift rod |
Type | Bearing, selector-/shift rod |
Inner diameter | 25 mm |
Outer diameter | 32 mm |
Material | Steel |
Height | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Opening Pressure | 1.4 bar |
Type | Cap, coolant tank |
Function | Cap, coolant tank |
Colour | blue |
for OE number | 46742378 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 34 mm |
Outer diameter | 37 mm |
Inner diameter | 16 mm |
Function | Bush, driver cab suspension |
Type | Bush, driver cab suspension |
Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 68 mm |
Filter type | Spin-on Filter |
Function | Oil Filter |
Internal Thread Size | 3/4" - 16 UNF |
Type | Oil Filter |
Height | 92 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 260 mm |
Height | 10 mm |
Width | 132 mm |
Filter type | Pollen Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Replaces | 22954 |
Placement on Vehicle | Lower, Front Axle Left, Rear, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 63 mm. 71 mm |
Thickness | 51 mm |
Inner diameter | 19 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 136 mm |
Spanner Size | 18 |
Bolt Head/Nut Design | External Hexagon |
Quality/ Grade | 10.9 |
DIN / ISO | 989 |
External Thread Size | M12 x 1,5 |
Surface | Oiled |
Function | Bolt, axle beam mounting |
Screw length below head | 125 mm |
Type | Bolt, axle beam mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 165 mm |
Material | Rubber |
Inner diameter 1 | 41 mm |
Inner diameter 2 | 52 mm |
Function | Bellow, steering |
Type | Bellow, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 123.6 mm |
Inner diameter | 113.3 mm |
Pipe Connector | Pipe Clamp |
Function | Pipe Connector, exhaust system |
Type | Pipe Connector, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 33 mm |
Length | 47 mm |
Placement on Vehicle | Rear Axle, Front Axle |
Function | Mounting, stabiliser bar |
Outer diameter | 62 mm |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 300 mm |
Brake Type | Disc Brake |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | ACM (Polyacrylate) |
Outer diameter | 65 mm |
Thickness | 9 mm. 13 mm |
Inner diameter | 45 mm |
Function | Shaft Seal, differential |
Placement on Vehicle | Rear Axle |
Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023