Important compatibility info
| Width | 39 mm |
| Outer diameter | 75 mm |
| Inner diameter | 40 mm |
| Placement on Vehicle | Front Axle |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
Important compatibility info
| Width | 39 mm |
| Outer diameter | 75 mm |
| Inner diameter | 40 mm |
| Placement on Vehicle | Front Axle |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
Important compatibility info
| Length | 26 Inch |
| Function | Wiper Blade |
| Extra Description | Traditional |
| Type | Wiper Blade |
| Length | 660 mm |
| Fastening Type | Hook fixing |
Important compatibility info
| Length | 26 Inch |
| Function | Wiper Blade |
| Extra Description | Traditional |
| Type | Wiper Blade |
| Length | 660 mm |
| Fastening Type | Hook fixing |
Important compatibility info
| Length | 16 Inch |
| Function | Wiper Blade |
| Extra Description | Traditional |
| Type | Wiper Blade |
| Length | 406 mm |
| Fastening Type | Hook fixing |
Important compatibility info
| Length | 16 Inch |
| Function | Wiper Blade |
| Extra Description | Traditional |
| Type | Wiper Blade |
| Length | 406 mm |
| Fastening Type | Hook fixing |
Important compatibility info
| Cone Size | 13.5 mm |
| Function | Ball Joint |
| Thread Measurement 1 | M12x1.25 |
| Thread Size | M12x1.25 |
| Type | Ball Joint |
| Replaces | QSJ3522S |
| Placement on Vehicle | Front Axle, Lower |
Important compatibility info
| Cone Size | 13.5 mm |
| Function | Ball Joint |
| Thread Measurement 1 | M12x1.25 |
| Thread Size | M12x1.25 |
| Type | Ball Joint |
| Replaces | QSJ3522S |
| Placement on Vehicle | Front Axle, Lower |
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | QSA2438S |
| Cone Size | 13.4 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
| Length | 400 mm |
| Width | 90 mm |
| Thread Size | M12x1,25 |
Important compatibility info
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | QSA2438S |
| Cone Size | 13.4 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
| Length | 400 mm |
| Width | 90 mm |
| Thread Size | M12x1,25 |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.2 kW |
| Type | Starter |
| Function | Starter |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.2 kW |
| Type | Starter |
| Function | Starter |
Important compatibility info
| Alternator Charge Current | 100 A |
| Type | Alternator |
| for OE number | 104210-1350 |
| Voltage | 12 V |
| Function | Alternator |
Important compatibility info
| Alternator Charge Current | 100 A |
| Type | Alternator |
| for OE number | 104210-1350 |
| Voltage | 12 V |
| Function | Alternator |
Important compatibility info
| Additional Information 2 | with fastening material |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 361 mm |
| Extra Description | Premium Kit+ |
| Type | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Additional Information 2 | with fastening material |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 361 mm |
| Extra Description | Premium Kit+ |
| Type | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Length | 465 mm |
| Width | 148 mm |
| Function | Mounting Tool, bellow |
| Weight | 2 kg |
| Extra Description | Duraboot |
| Type | Mounting Tool, bellow |
Additional Information
Safety information
Safety First Read the operating and safety instruction. Follow them carefully. Maximum safe operating pressure 9 bar (125 psi). Air lines are dangerous - use them correctly Putting into service Before use check cap-retaining screws are secure.If the Air tool is dropped check for cracked components. Check air line pressure before connecting the Air tool.The Air tool should be used only by people trained in the use of pneumatically operated tools. Use Keep hands away from moving parts. Never operate the Air tool near the face or body. Only use Air tool to fit CV boots. If air line pressure exceeds 9 bar fit a regulator. Disconnect the Air tool from the air supply after use.
Installation Information
Operation: 1. Slide boot onto arms, large end first. The arms should just protrude from the small end of the boot. To fit a boot to an inner joint, turn the boot inside out before sliding i onto the Airtools´s arm. 2. Press " + " button until arms open enough to pass over the joint. Keep hands clear of moving parts. The air line can now be disconnected. The arms will remain open until the " - " button is pressed. 3. Place Airtool over CV joint and press release button (" -"). Keep hands away from moving parts. 4. Withdraw the Airtool, leaving the boot in position. Complete the installation in the normal way.
Important compatibility info
| Function | Brake/Clutch Cleaner |
| Type | Brake/Clutch Cleaner |
| Contents | 600 ml |
Important compatibility info
| Outer diameter | 11.0 mm |
| Function | Fuel Hose |
| Hose Length | 25000 mm |
| Type | Fuel Hose |
| Inner diameter | 4.0 mm |
Important compatibility info
| Type | Fuel Hose |
| Inner diameter | 3.2 mm |
| Function | Fuel Hose |
| Hose Length | 1000 mm |
Important compatibility info
| Function | Pipe Cutter |
| Type | Pipe Cutter |
Important compatibility info
| Type | Counter Display |
| Function | Counter Display |
Additional Information
- 1x Quinton Hazell Water Hose (QFH100)
- 1x Quinton Hazell Fuel Hose (QFH101)
- 1x Quinton Hazell Fuel Hose (QFH102)
- 1x Quinton Hazell Fuel Hose (QFH103)
- 1x Quinton Hazell Fuel Hose (QFH104)
- 1x Quinton Hazell Fuel Hose (QFH105)
Important compatibility info
| Function | Wiper Blade |
| Type | Wiper Blade |
| Length | 12 Inch |
| Extra Description | Direct Fit (Rear) |
| Placement on Vehicle | Rear |
Important compatibility info
| Function | Wiper Blade |
| Type | Wiper Blade |
| Length | 12 Inch |
| Extra Description | Direct Fit (Rear) |
| Placement on Vehicle | Rear |
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Water pump impeller material | Metal |
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Water pump impeller material | Metal |
Important compatibility info
| Function | V-Ribbed Belt |
| Length | 895 mm |
| Number of Ribs | 4 |
| Type | V-Ribbed Belt |
Important compatibility info
| Function | V-Ribbed Belt |
| Length | 895 mm |
| Number of Ribs | 4 |
| Type | V-Ribbed Belt |
Important compatibility info
| Length | 1170 mm |
| Number of Ribs | 4 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Important compatibility info
| Length | 1170 mm |
| Number of Ribs | 4 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















