Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 29 |
| External Teeth, Diff.Side | 25 |
| Min. Length | 761 mm |
| Wheel Sided Joint Diameter | 84.8 mm |
| Transmission-side joint diameter | 80.8 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.95
Important compatibility info
| Function | Throttle body |
| Number of Connectors / Ports | 6 |
| Operating Mode | Electric |
| Voltage | 12 V |
| Additional Information | with gasket/seal |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Throttle Body (100992)
- 1x Febi Seal Ring, throttle body (39736)
£111.89
Important compatibility info
| Length | 620 mm |
| Material | Steel |
| Outer diameter | 310 mm |
| Number of Connectors / Ports | 5 |
| Capacity | 40 l |
| Operating Pressure | 12.5 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.70
Important compatibility info
| Thickness | 355 mm. 84 mm |
| External Thread Size | M14 x 1,5, M10 x 1,5 |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Outer diameter | 228 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.69
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| Bolt Hole Circle Diameter | 131.3 mm |
| Bore Diameter | 10.8 mm |
| External Teeth, Wheel Side | 29 |
| Number of mounting bores | 2 |
| External Teeth, Diff.Side | 29 |
| Min. Length | 1006 mm |
| Wheel Sided Joint Diameter | 100.4 mm |
| Transmission-side joint diameter | 94 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.64
Important compatibility info
| Thickness | 62.5 mm |
| Width | 196 mm |
| Outer diameter | 196 mm |
| Inner diameter | 19 mm |
| Number of Ribs | 2 |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| Number of Holes | 4 |
Additional Information
Technical Information
The diamond-coated washer included in this kit has to be used to replace the formerly fitted washer.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (29896)
- 1x Febi Washer, crankshaft pulley (31815)
£111.62
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 710 mm |
| Min. Length | 445 mm |
| Pipe Diameter | 60 mm. 70 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20260 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.62
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Left |
| Paired article numbers | 183939, 184874 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.62
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 30 |
| Bore Diameter | 10.5 mm |
| Bolt Hole Circle Diameter | 85.95 mm |
| Thread Size | M27x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Rear Axle |
| Transmission-side joint diameter | 99.9 mm |
| Wheel Sided Joint Diameter | 94 mm |
| Min. Length | 661 mm |
| Number of mounting bores | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.62
Important compatibility info
| Outer diameter | 50 mm |
| Length | 399 mm. 631 mm |
| Placement on Vehicle | Front Axle |
| Function | Shock Absorber, steering |
| Type | Shock Absorber, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Length | 237 mm |
| Additional Information | with Thrust Bearing |
| Outer diameter | 54 mm |
| Additional Information 2 | with bearing |
| Paired article numbers | 15899 |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (15864)
- 4x Febi Bush, steering knuckle (15858)
- 1x Febi Seal Ring, steering knuckle (15886)
- 1x Febi Bush, steering knuckle (15860)
- 1x Febi Washer (15887)
£111.61
Important compatibility info
| Function | Centre Rod Assembly |
| Width | 40 mm |
| Thickness | 116 mm |
| Rod/Strut | Push Rod |
| Thread Type | with right-hand thread |
| Internal Thread Size | M30 x 1,5 |
| Pipe Diameter | 60 mm |
| Cone Size | 30 mm |
| Length | 825 mm |
| Placement on Vehicle | Front Axle |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Operating Mode | Manual |
| Spanner Size | 22 |
| Number of Connectors / Ports | 2 |
| Type | Tilt Pump, driver cab |
| Hole Spacing | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Function | Bush, kingpin |
| Extra Description | ProKit |
| Type | Bush, kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (38490)
- 1x Febi Ball Joint (28356)
- 1x Febi Mounting, control/trailing arm (44400)
- 2x Febi Mounting, control/trailing arm (26933)
- 1x Febi Screw (44467)
- 1x Febi Screw (44469)
- 2x Febi Nut (44470)
£111.61
Important compatibility info
| Function | Wheel Bearing |
| Inner diameter | 78 mm |
| Bearing Type | Tapered Roller Bearing |
| Width | 90 mm |
| Outer diameter | 130 mm |
| Type | Wheel Bearing |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
| Hole Spacing | 100 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 14 mm. 35 mm |
| Min. Length | 281 mm |
| Pipe Diameter | 62 mm. 44 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Max. Length | 360 mm |
| Placement on Vehicle | Front, both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Paired article numbers | 179577 |
| Additional Information | with rubber mounts |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Steering arm type | Triangular Control Arm (CV) |
| Placement on Vehicle | Front Axle, Upper Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Placement on Vehicle | Front Axle, Upper Left |
| Cone Size | 18 mm |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Steering arm type | Triangular Control Arm (CV) |
| Paired article numbers | 179576 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
Important compatibility info
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Inner diameter | 26 mm |
| Parameter | 7PK |
| Width | 146 mm |
| Outer diameter | 146 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.61
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023