Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Length | 450 mm |
| Height | 100 mm |
| Width | 358 mm |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | TC6902 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Length | 450 mm |
| Height | 100 mm |
| Width | 358 mm |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | TC6902 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Additional Information 2 | with cooling duct, with piston ring carrier, for keystone connecting rod |
| Component Number | 08-422007-00 |
| Cylinder Bore | 84.5 mm |
| Bolt Diameter | 32 mm |
| Oversize | 0.5 mm |
| Compression Height | 47.92 mm |
| Bolt length | 65 mm |
| Recess Depth 1 | 14.9 mm |
| Recess Diameter | 49.07 mm |
| Valve pocket depth 1 | 0.4 mm |
| Valve pocket depth 2 | 0.4 mm |
| Height | 76 mm |
| Machined | with cut-out for oil jet |
| Function | Piston |
| Type | Piston |
Important compatibility info
| Additional Information 2 | with cooling duct, with piston ring carrier, for keystone connecting rod |
| Component Number | 08-422007-00 |
| Cylinder Bore | 84.5 mm |
| Bolt Diameter | 32 mm |
| Oversize | 0.5 mm |
| Compression Height | 47.92 mm |
| Bolt length | 65 mm |
| Recess Depth 1 | 14.9 mm |
| Recess Diameter | 49.07 mm |
| Valve pocket depth 1 | 0.4 mm |
| Valve pocket depth 2 | 0.4 mm |
| Height | 76 mm |
| Machined | with cut-out for oil jet |
| Function | Piston |
| Type | Piston |
Important compatibility info
| Includes fitting kit | FK90938B |
| Placement on Vehicle | Right |
| Extra Description | Non-approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| To be used with part number(s) | FK90938 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Includes fitting kit | FK90938B |
| Placement on Vehicle | Right |
| Extra Description | Non-approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| To be used with part number(s) | FK90938 |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Placement on Vehicle | Left |
| To be used with part number(s) | FK90941 |
| Includes fitting kit | FK90941B |
| Extra Description | Non-approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Placement on Vehicle | Left |
| To be used with part number(s) | FK90941 |
| Includes fitting kit | FK90941B |
| Extra Description | Non-approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Material | Ceramic |
Additional Information
Technical Information
Illegal to Supply for Vehicles Registered on or after 01/03/ 01 in the UK
Important compatibility info
| Length | 187 mm |
| Voltage | 12 V |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.2 kW |
| Connecting Angle | 53 ° |
| Pinion Rest Position | 21.5 mm |
| Type | Starter |
| Function | Starter |
| Jaw opening angle measurement [Degree] | 122 ° |
| Fastening hole angle measurement [Degree] | 53 ° |
| Thread Size | M10X1,25 |
| Number of Teeth | 10 |
| Thread Measurement 1 | M10X1,25 |
| Flange Diameter | 77 mm |
| Number of Thread Bores | 2 |
| Position / Degree | links ° |
| Clamp | 50, 30 |
| Starter Type | Self-supporting |
Important compatibility info
| Length | 187 mm |
| Voltage | 12 V |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.2 kW |
| Connecting Angle | 53 ° |
| Pinion Rest Position | 21.5 mm |
| Type | Starter |
| Function | Starter |
| Jaw opening angle measurement [Degree] | 122 ° |
| Fastening hole angle measurement [Degree] | 53 ° |
| Thread Size | M10X1,25 |
| Number of Teeth | 10 |
| Thread Measurement 1 | M10X1,25 |
| Flange Diameter | 77 mm |
| Number of Thread Bores | 2 |
| Position / Degree | links ° |
| Clamp | 50, 30 |
| Starter Type | Self-supporting |
Important compatibility info
| Material | Aluminium |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Radiator type | Brazed cooling fins |
| Core Length | 649 mm |
| Core Width | 296 mm |
| Core Depth | 32 mm |
Important compatibility info
| Material | Aluminium |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Radiator type | Brazed cooling fins |
| Core Length | 649 mm |
| Core Width | 296 mm |
| Core Depth | 32 mm |
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Additional Information 2 | with grooves |
| Extra Description | DriveAlign™ |
| Type | Belt Tensioner, v-ribbed belt |
| Width | 37.5 mm |
| Outer diameter | 26 mm |
| Bolt Diameter | 8.5 mm |
| Number of grooves | 6 |
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Additional Information 2 | with grooves |
| Extra Description | DriveAlign™ |
| Type | Belt Tensioner, v-ribbed belt |
| Width | 37.5 mm |
| Outer diameter | 26 mm |
| Bolt Diameter | 8.5 mm |
| Number of grooves | 6 |
Important compatibility info
| Voltage | 12 V |
| Alternator Charge Current | 139 A |
| Belt Pulley Diameter | 62 mm |
| Function | Alternator |
| Type | Alternator |
| for OE number | 63377492 |
Important compatibility info
| Voltage | 12 V |
| Alternator Charge Current | 139 A |
| Belt Pulley Diameter | 62 mm |
| Function | Alternator |
| Type | Alternator |
| for OE number | 63377492 |
Important compatibility info
| Function | Silencer Insert, rear muffler |
| Type | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Function | Silencer Insert, rear muffler |
| Type | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| External Teeth, Wheel Side | 30 |
| Length | 616 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| External Teeth, Wheel Side | 30 |
| Length | 616 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Intake Manifold, air supply |
| Type | Intake Manifold, air supply |
Important compatibility info
| Rotor Style | solid |
| Placement on Vehicle | Rear Axle |
| Height | 67 mm |
| Number of Holes | 4 |
| Additional Information 2 | with wheel bearing kit, with ABS sensor ring |
| Brake Disc Thickness | 9 mm |
| Outer diameter | 249 mm |
| Extra Description | PRIME LINE - With Bearing Kit |
| Tightening Torque | 90 Nm |
| Minimum thickness | 7 mm |
| Centering Diameter | 25 mm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Important compatibility info
| Rotor Style | solid |
| Placement on Vehicle | Rear Axle |
| Height | 67 mm |
| Number of Holes | 4 |
| Additional Information 2 | with wheel bearing kit, with ABS sensor ring |
| Brake Disc Thickness | 9 mm |
| Outer diameter | 249 mm |
| Extra Description | PRIME LINE - With Bearing Kit |
| Tightening Torque | 90 Nm |
| Minimum thickness | 7 mm |
| Centering Diameter | 25 mm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 2.5 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 2.5 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Core Depth | 32 mm |
| Core Width | 418 mm |
| Core Length | 614 mm |
| Radiator type | Brazed cooling fins |
| Function | Radiator, engine cooling |
| Heating / Cooling | for vehicles with combined radiator/ oil cooler |
| Material | Aluminium |
| Type | Radiator, engine cooling |
Important compatibility info
| Core Depth | 32 mm |
| Core Width | 418 mm |
| Core Length | 614 mm |
| Radiator type | Brazed cooling fins |
| Function | Radiator, engine cooling |
| Heating / Cooling | for vehicles with combined radiator/ oil cooler |
| Material | Aluminium |
| Type | Radiator, engine cooling |
Important compatibility info
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
| Shock Absorber Design | Suspension Strut |
| Placement on Vehicle | Front Axle |
| for OE number | 1869799 |
Important compatibility info
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
| Shock Absorber Design | Suspension Strut |
| Placement on Vehicle | Front Axle |
| for OE number | 1869799 |
Important compatibility info
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Radiator type | Brazed cooling fins |
| Core Length | 510 mm |
| Core Width | 478 mm |
| Core Depth | 22 mm |
Important compatibility info
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Radiator type | Brazed cooling fins |
| Core Length | 510 mm |
| Core Width | 478 mm |
| Core Depth | 22 mm |
Important compatibility info
| Number of Teeth | 21 |
| Additional Information 2 | with bearing |
| Function | Clutch Kit |
| Extra Description | 3-1 Kit |
| Hub Profile | 29,5 |
| Friction Lining Outer Diameter | 236 mm |
| Type | Clutch Kit |
Important compatibility info
| Number of Teeth | 21 |
| Additional Information 2 | with bearing |
| Function | Clutch Kit |
| Extra Description | 3-1 Kit |
| Hub Profile | 29,5 |
| Friction Lining Outer Diameter | 236 mm |
| Type | Clutch Kit |
Important compatibility info
| Number of screws | 18 |
| Type | Cylinder Head Bolt Set |
| Function | Cylinder Head Bolt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of screws | 18 |
| Type | Cylinder Head Bolt Set |
| Function | Cylinder Head Bolt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 3 |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 3 |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Weight | 1.315 kg |
| Type | Fuel Feed Unit |
| Diameter | 124 mm |
| Function | Fuel Feed Unit |
| Delivery Quantity | 55 l/h |
| Housing Colour | Yellow |
| Number of Inlets / Outlets | 1 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Additional Information | with fuel sender unit |
| Net weight | 1.210 kg |
Important compatibility info
| Weight | 1.315 kg |
| Type | Fuel Feed Unit |
| Diameter | 124 mm |
| Function | Fuel Feed Unit |
| Delivery Quantity | 55 l/h |
| Housing Colour | Yellow |
| Number of Inlets / Outlets | 1 |
| Operating Mode | Electric |
| Number of Poles | 4 -pin connector |
| Additional Information | with fuel sender unit |
| Net weight | 1.210 kg |
Important compatibility info
| Diameter | 260 mm |
| Additional Information 2 | with clutch release bearing |
| Type | Clutch Kit |
| Function | Clutch Kit |
Important compatibility info
| Diameter | 260 mm |
| Additional Information 2 | with clutch release bearing |
| Type | Clutch Kit |
| Function | Clutch Kit |
Important compatibility info
| Alternator Charge Current | 150 A |
| Number of Ribs | 6 |
| Plug Type ID | 0223 |
| Net weight | 7.38 kg |
| Pulleys | with freewheel belt pulley |
| Clamp | M8 B+, COM/LIN2 |
| Type | Alternator |
| Voltage | 14 V |
| Belt Pulley Diameter | 54 mm |
| Vehicle Main Current | for vehicles with 12V main current |
| Bore Diameter 1 | 10 mm |
| Function | Alternator |
Important compatibility info
| Alternator Charge Current | 150 A |
| Number of Ribs | 6 |
| Plug Type ID | 0223 |
| Net weight | 7.38 kg |
| Pulleys | with freewheel belt pulley |
| Clamp | M8 B+, COM/LIN2 |
| Type | Alternator |
| Voltage | 14 V |
| Belt Pulley Diameter | 54 mm |
| Vehicle Main Current | for vehicles with 12V main current |
| Bore Diameter 1 | 10 mm |
| Function | Alternator |
Important compatibility info
| Hub Profile | 21,8x24,3 |
| Friction Lining Outer Diameter | 240 mm |
| Function | Clutch Kit |
| Extra Description | 3-1 Kit |
| Additional Information | with central slave cylinder |
| Number of Teeth | 23 |
| Type | Clutch Kit |
Additional Information
- 1x Quinton Hazell Clutch Kit (QKT2845AF)
Important compatibility info
| Hub Profile | 21,8x24,3 |
| Friction Lining Outer Diameter | 240 mm |
| Function | Clutch Kit |
| Extra Description | 3-1 Kit |
| Additional Information | with central slave cylinder |
| Number of Teeth | 23 |
| Type | Clutch Kit |
Additional Information
- 1x Quinton Hazell Clutch Kit (QKT2845AF)
Important compatibility info
| Voltage | 12 V |
| Alternator Charge Current | 110 A |
| for OE number | F000BL0707 |
| Type | Alternator |
| Function | Alternator |
Important compatibility info
| Voltage | 12 V |
| Alternator Charge Current | 110 A |
| for OE number | F000BL0707 |
| Type | Alternator |
| Function | Alternator |
Important compatibility info
| Length | 580 mm |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 28 |
| Number of Teeth, ABS ring | 48 |
| ABS Ring Diameter | 87 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Additional Information | without intermediate shaft gear |
| Additional Information 2 | without bearing |
Important compatibility info
| Length | 580 mm |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 28 |
| Number of Teeth, ABS ring | 48 |
| ABS Ring Diameter | 87 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Additional Information | without intermediate shaft gear |
| Additional Information 2 | without bearing |
Important compatibility info
| Function | Clutch Kit |
| Engine Version | for engines with dual-mass flywheel |
| Hub Profile | 24.3 x 21.5 |
| Number of Teeth | 21 |
| Outer diameter | 239 mm |
| Number of Parts | 2 -part |
| Type | Clutch Kit |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























