Proud to be a UK-based company
Contact us
Important compatibility info
| Width | 102 mm |
| Material | Aluminium |
| Outer diameter | 65 mm |
| Operating Mode | Mechanical |
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.85
Important compatibility info
| Additional Information 2 | with screw |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Wheel Side | 37 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 863 mm |
| Transmission-side joint diameter | 81 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Thread Size | M16x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.82
Important compatibility info
| Material | Sheet Steel |
| Placement on Vehicle | Lower, Front Axle Right |
| Additional Information | with lock nut, with rubber mounts |
| External Thread Size | M16 x 2 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 180517 |
| Cone Size | 26 mm |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.82
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 15 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
| Mounting bores distance | 90 mm |
| Max. Length | 457 mm |
| Min. Length | 282 mm |
| Pipe Diameter | 58 mm |
| Piston conrod diameter | 28 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.73
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 26656 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material, with holder |
| Additional Information 2 | with bearing, with ball joint |
| Additionally Required Parts | 31 10 6 757 145, 7 12 9 906 196, 31 10 6 772 199 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (26641)
- 1x Febi Mounting, control/trailing arm (18687)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (104977)
£105.68
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 180932 |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 17 mm |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Additional Information 2 | with ball joint, with rubber mount |
| Steering arm type | Control Arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.68
Important compatibility info
| External Teeth, Wheel Side | 30 |
| Number of mounting bores | 6 |
| Bolt Hole Circle Diameter | 86 mm |
| Thread Size | M27x1,5 |
| Bore Diameter | 10.5 mm |
| Min. Length | 682 mm |
| ABS Ring Diameter | 83 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Transmission-side joint diameter | 100 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.68
Important compatibility info
| Type | Vacuum Pump, braking system |
| Function | Vacuum Pump, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.68
Important compatibility info
| Number of Connectors / Ports | 4 |
| Ignition Coil | 4 Spark |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Thickness | 330 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Outer diameter | 258 mm. 150 mm |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Number of Connectors / Ports | 6 |
| Function | Ignition Coil |
| Type | Ignition Coil |
| for OE number | 95517924 |
| Ignition Coil | 4 Spark |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.66
Important compatibility info
| Belts | with rounded tooth profile |
| Water pump impeller material | Metal |
| Number of Teeth | 116 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Additional Information | with gasket/seal |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Width | 25.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (37460)
- 1x Febi Water Pump, engine cooling (38898)
£105.64
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 228 mm |
| Thickness | 210 mm |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.62
Important compatibility info
| Type | Tie Rod |
| Pipe Diameter | 50 mm |
| for OE number | 2 853 196 |
| Cone Size | 30 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Length | 1743 mm |
| Placement on Vehicle | Front Axle |
| External Thread Size | M24 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.57
Important compatibility info
| for OE number | 03L 115 105 F |
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.55
Important compatibility info
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.55
Important compatibility info
| Width of castor bearing surface | 20 mm |
| Outer diameter | 76 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| for OE number | 038 903 315 P |
| Type | Belt Tensioner, v-ribbed belt |
| Vibration | with vibration absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.53
Important compatibility info
| Function | Alternator Freewheel Clutch |
| Type | Alternator Freewheel Clutch |
| Additional Information 2 | with coupling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Alternator Freewheel Clutch (26958)
- 1x Febi Flexible Coupling Sleeve (30798)
£105.53
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Material | Rubber/Metal |
| Placement on Vehicle | both sides, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.51
Important compatibility info
| Operating Mode | Mechanical |
| Additional Information 2 | Requires special tools for mounting |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Chain Type | Simplex, Closed chain |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.50
Important compatibility info
| Housing material | Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.49
Important compatibility info
| Width of castor bearing surface | 24 mm |
| Width | 70 mm |
| Material | Plastic |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.49
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Thickness | 46.4 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | perforated/vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.45
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M24x1,5 |
| Paired article numbers | 188158 |
| External Teeth, Wheel Side | 29 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 950 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 84 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.45
Important compatibility info
| Thickness | 205 mm |
| Number of Holes | 4 |
| Function | Bush, parabolic spring |
| Length | 220 mm |
| Width | 135 mm |
| Type | Bush, parabolic spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.40
Important compatibility info
| Outer diameter | 163 mm |
| Width | 65 mm |
| Function | Belt Pulley, crankshaft |
| Inner diameter | 27 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.36
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 108820 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.36
Important compatibility info
| Housing Type | without housing |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Type | Mass Air Flow Sensor |
| Number of Connectors / Ports | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.27
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with axle nut |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| Paired article numbers | 193516 |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 28 |
| Min. Length | 613 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.26
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.26
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Right |
| Additional Information | with lock nut, with rubber mounts |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 197797 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.24
Important compatibility info
| Placement on Vehicle | steered leading axle |
| Length | 1025 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Guide Rod |
| Cone Size | 28.6 mm |
| Adjustable | Adjustable on one side |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.21
Important compatibility info
| Function | Charge Air Hose |
| Inner diameter | 97 mm |
| Outer diameter | 119 mm |
| Type | Charge Air Hose |
| Hose Length | 175 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.21
Important compatibility info
| Additional Information | with gasket/seal |
| Type | Cooler, exhaust gas recirculation |
| Function | Cooler, exhaust gas recirculation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.19
Important compatibility info
| Number of Teeth | 63 |
| Function | Gear, air compressor |
| Type | Gear, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.12
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | before soot particulate filter, Left |
| Type | Sensor, exhaust gas temperature |
| for OE number | 07Z 906 088 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.10
Important compatibility info
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Left |
| Type | Ball Joint |
| Function | Ball Joint |
| Extra Description | ProKit |
| Thickness | 175 mm |
| External Thread Size | M30 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.08
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Spanner Size | 22 |
| Cable Length | 700 mm |
| Number of circuits | 4 |
| Function | Oxygen Sensor |
| Placement on Vehicle | after catalytic converter |
| Type | Oxygen Sensor |
| Lambda Sensor | Heated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.08
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 682 mm |
| Min. Length | 408 mm |
| Pipe Diameter | 63 mm. 51 mm |
| Piston conrod diameter | 18 mm |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.02
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
| Type | EGR Valve |
| Function | EGR Valve |
| Additional Information | with gasket/seal |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| for OE number | 1618.LN |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.02
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 22 |
| Rated Power | 1.8 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.01
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 1840 mm |
| Number of circuits | 4 |
| External Thread Size | M18 x 1,5 |
| Lambda Sensor | Heated, Diagnostic Probe |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.98
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Bore Diameter | 42 mm |
| Rod/Strut | Pull Rod |
| Length | 415 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.96
Important compatibility info
| Additional Information | with coolant level sensor |
| Material | Plastic |
| Additional Information 2 | with lid |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.95
Important compatibility info
| Inner diameter 2 | 44 mm |
| Function | Intake Hose, air filter |
| Material | Rubber |
| Inner diameter 1 | 70 mm |
| Hose Length | 195 mm |
| Extra Description | febi Plus |
| Type | Intake Hose, air filter |
| Additional Information | with quick coupling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.95
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 376 mm |
| Thickness | 41.9 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 24 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 64.5 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.92
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 274 mm |
| Thickness | 10.9 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 9.5 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 52.3 mm |
| Surface | Oiled |
| Function | Brake Disc |
| Rotor Style | Solid |
| Additional Information 2 | with ABS sensor ring, with grease cap |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.91
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Number of Connectors / Ports | 2 |
| Operating Mode | Hydraulic |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
| Operating Pressure | 11 bar |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.90
Important compatibility info
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (35334)
- 1x Febi Fuel filter (39367)
- 1x Febi Air Filter (39258)
- 1x Febi Filter, cabin air (22009)
- 1x Febi Air Filter, compressor intake (38976)
- 1x Febi Urea Filter (35435)
£104.88
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.83
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023