Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with electric motor |
| Brake caliper piston diameter | 34 mm |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179244 |
| Function | Brake Caliper |
| Vehicle Equipment | for vehicles with electric parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.67
Important compatibility info
| Type | Solenoid Valve, retarder |
| Length | 90 mm |
| Thickness | 40 mm |
| Function | Solenoid Valve, retarder |
| Width | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.66
Important compatibility info
| Thread Size | M16x1,6 |
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Additional Information 2 | with bolts/screws |
| Transmission-side joint diameter | 109.7 mm |
| External Teeth, Wheel Side | 36 |
| Min. Length | 783 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.65
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M29x1,5 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 864 mm |
| Wheel Sided Joint Diameter | 93.5 mm |
| Transmission-side joint diameter | 89 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.65
Important compatibility info
| External Thread Size | M10 x 1,5, M36 x 2, M26 x 1,5 |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 197 mm. 157 mm |
| Thickness | 136 mm. 464 mm |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.65
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | EGR Valve |
| Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.57
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.56
Important compatibility info
| Number of Connectors / Ports | 12. 4. 14 |
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.54
Important compatibility info
| Inner diameter | 17 mm |
| Outer diameter | 62 mm |
| Width | 53 mm |
| Number of Ribs | 6 |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.53
Important compatibility info
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Rotor Style | Solid |
| Centering Diameter | 52.3 mm |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Brake Disc Thickness | 8 mm |
| Additional Information 2 | with ABS sensor ring |
| Thickness | 86 mm |
| Outer diameter | 260 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.49
Important compatibility info
| Material | Plastic |
| Paired article numbers | 26942 |
| Colour | Black |
| Placement on Vehicle | Right |
| Function | Exterior Door Handle |
| Type | Exterior Door Handle |
| Lock System | without lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.48
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Thickness | 62.2 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.48
Important compatibility info
| Number of Teeth, ABS ring | 29 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 59.2 mm |
| Outer diameter | 129 mm |
| Inner diameter | 25 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 108 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.47
Important compatibility info
| Height | 239 mm |
| Outer diameter | 117 mm |
| Filter type | Filter Insert |
| Function | Fuel filter set |
| Type | Fuel filter set |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.47
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Paired article numbers | 182647 |
| Colour | Black |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.42
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 34648 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21466)
£103.41
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1025 mm |
| Additional Information | with nuts |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | adjustable |
| Pipe Diameter | 50 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.40
Important compatibility info
| Function | Air Dryer, compressed-air system |
| Type | Air Dryer, compressed-air system |
| Voltage | 24 V |
| Additional Information 2 | with dryer, with integrated oil separator |
| Rated Power | 100 W |
| Cut-off Pressure | 12 bar |
| Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.39
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information 2 | with screw |
| Type | Drive Shaft |
| Additional Information | with grease |
| Function | Drive Shaft |
| Min. Length | 494 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 42 |
| Transmission-side joint diameter | 80 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.31
Important compatibility info
| Function | Joint, propshaft |
| Number of Holes | 6 |
| Placement on Vehicle | Front |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 6x Febi Screw (43413)
£103.30
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting points diameter | 24 mm |
| Piston conrod diameter | 17 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Replaces | 20105 |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Design | Telescopic Shock Absorber |
| Max. Length | 432 mm |
| Min. Length | 292 mm |
| Pipe Diameter | 80 mm. 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.30
Important compatibility info
| Min. Length | 471 mm |
| Pipe Diameter | 73 mm. 63 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Function | Shock Absorber |
| Mounting points diameter | 24 mm |
| Piston conrod diameter | 20 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 764 mm |
| Shock Absorber Type | Oil Pressure |
| Type | Shock Absorber |
| Replaces | 20116 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.30
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Function | Shock Absorber |
| Max. Length | 380 mm |
| Min. Length | 270 mm |
| Pipe Diameter | 86 mm. 76 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 22 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.30
Important compatibility info
| Max. Length | 783 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Pipe Diameter | 73 mm. 63.5 mm |
| Placement on Vehicle | Rear Axle |
| Min. Length | 473 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20088 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.30
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Min. Length | 479 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Max. Length | 801 mm |
| Replaces | 20398 |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.30
Important compatibility info
| Max. Length | 737 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Min. Length | 457 mm |
| Pipe Diameter | 73 mm. 63 mm |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Replaces | 171919 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.30
Important compatibility info
| Shock Absorber Design | Telescopic Shock Absorber |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 715 mm |
| Min. Length | 445 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 19 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.30
Important compatibility info
| Function | Shock Absorber |
| Type | Shock Absorber |
| Max. Length | 750 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Min. Length | 462 mm |
| Placement on Vehicle | Front Axle |
| Pipe Diameter | 63.5 mm. 55 mm |
| Shock Absorber Type | Oil Pressure |
| Mounting points diameter | 16 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.30
Important compatibility info
| Function | Shock Absorber |
| Mounting points diameter | 16 mm |
| Pipe Diameter | 60 mm. 70 mm |
| Min. Length | 400 mm |
| Max. Length | 615 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
| Piston conrod diameter | 16 mm |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.30
Important compatibility info
| Pipe Diameter | 70 mm. 75 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 532 mm |
| Min. Length | 335 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£103.30
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023