Important compatibility info
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| Length | 1977 mm |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| Length | 1977 mm |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| To be used with part number(s) | FK80379 |
| Function | Catalytic Converter |
| Inspection Tag | E9-103R |
| Includes fitting kit | FK80379B |
| Extra Description | Approved |
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Product met | Euro 4 |
| Material | Ceramic |
Important compatibility info
| To be used with part number(s) | FK80379 |
| Function | Catalytic Converter |
| Inspection Tag | E9-103R |
| Includes fitting kit | FK80379B |
| Extra Description | Approved |
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Product met | Euro 4 |
| Material | Ceramic |
Important compatibility info
| Additional Information | with water pump |
| Part number of the recommended special tools | STT-1 |
| Function | Water Pump & Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5558XS)
- 1x Gates Tensioner Pulley, timing belt (T41140)
- 1x Gates Deflection Pulley/Guide Pulley, timing belt (T42070)
- 1x Gates Water Pump, engine cooling (WP0078)
Important compatibility info
| Additional Information | with water pump |
| Part number of the recommended special tools | STT-1 |
| Function | Water Pump & Timing Belt Kit |
| Extra Description | PowerGrip™ |
| Type | Water Pump & Timing Belt Kit |
Additional Information
- 1x Gates Timing Belt (5558XS)
- 1x Gates Tensioner Pulley, timing belt (T41140)
- 1x Gates Deflection Pulley/Guide Pulley, timing belt (T42070)
- 1x Gates Water Pump, engine cooling (WP0078)
Important compatibility info
| Brake Disc Type | Solid |
| Part number of recommended accessories | BBS6, BSC1 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Model | A4 A4 Allroad A5 Q5 |
| Manufacturer | AUDI |
| Brake Caliper Type | Brake caliper with adjusting element for electr. handbrake, Brake Caliper (1 piston) |
| Piston diameter 1 | 43 mm |
| Brake System | TRW |
| for brake disc thickness | 12 mm |
| Placement on Vehicle | in front of axle |
Important compatibility info
| Brake Disc Type | Solid |
| Part number of recommended accessories | BBS6, BSC1 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Model | A4 A4 Allroad A5 Q5 |
| Manufacturer | AUDI |
| Brake Caliper Type | Brake caliper with adjusting element for electr. handbrake, Brake Caliper (1 piston) |
| Piston diameter 1 | 43 mm |
| Brake System | TRW |
| for brake disc thickness | 12 mm |
| Placement on Vehicle | in front of axle |
Important compatibility info
| Type | Clutch Kit |
| Function | Clutch Kit |
| Additional Information | with central slave cylinder |
| Diameter | 240 mm |
Important compatibility info
| Type | Clutch Kit |
| Function | Clutch Kit |
| Additional Information | with central slave cylinder |
| Diameter | 240 mm |
Important compatibility info
| Material | Grey Cast Iron |
| for brake disc thickness | 25 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Piston diameter 1 | 45 mm |
| Placement on Vehicle | Front Axle Right |
| Brake Disc Type | Vented |
| Brake System | Sumitomo |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Piston diameter 2 | 45 mm |
Important compatibility info
| Material | Grey Cast Iron |
| for brake disc thickness | 25 mm |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Piston diameter 1 | 45 mm |
| Placement on Vehicle | Front Axle Right |
| Brake Disc Type | Vented |
| Brake System | Sumitomo |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Piston diameter 2 | 45 mm |
Important compatibility info
| Inspection Tag | E9-103R |
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| To be used with part number(s) | FK90539 |
| Product met | Euro 2 |
| Material | Ceramic |
Important compatibility info
| Inspection Tag | E9-103R |
| Extra Description | Approved |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| To be used with part number(s) | FK90539 |
| Product met | Euro 2 |
| Material | Ceramic |
Important compatibility info
| Labels & Certifications | Euro 3 |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Labels & Certifications | Euro 3 |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Rated Power | 1.7 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 73 ° |
| Starter Type | Floating pinion |
| Bore Diameter 2 | 11 mm |
| Pinion Rest Position | 42.5 mm |
| Connecting Angle | 73 ° |
| Clamp | 50, 30 |
| Position / Degree | rechts ° |
| Flange Diameter | 76.2 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Anticlockwise rotation |
| Bore Diameter | 11 mm |
| Length | 255 mm |
| Voltage | 12 V |
| Type | Starter |
| Number of Teeth | 11. 10 |
Important compatibility info
| Rated Power | 1.7 kW |
| Function | Starter |
| Fastening hole angle measurement [Degree] | 73 ° |
| Starter Type | Floating pinion |
| Bore Diameter 2 | 11 mm |
| Pinion Rest Position | 42.5 mm |
| Connecting Angle | 73 ° |
| Clamp | 50, 30 |
| Position / Degree | rechts ° |
| Flange Diameter | 76.2 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Anticlockwise rotation |
| Bore Diameter | 11 mm |
| Length | 255 mm |
| Voltage | 12 V |
| Type | Starter |
| Number of Teeth | 11. 10 |
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Cooler, exhaust gas recirculation |
| Type | Cooler, exhaust gas recirculation |
| for OE number | 03L 131 512 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gaskets/seals |
| Function | Cooler, exhaust gas recirculation |
| Type | Cooler, exhaust gas recirculation |
| for OE number | 03L 131 512 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Teeth, Wheel Side | 27 |
| Seal Diameter | 56 mm |
| Internal Teeth, wheel side | 23 |
| Number of Teeth, ABS ring | 44 |
| Length | 164 mm |
| Placement on Vehicle | Wheel Side, Front Axle |
| Function | Joint Kit, drive shaft |
| Outer diameter | 82 mm |
| External Thread Size | M24 x 1,5 |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Teeth, Wheel Side | 27 |
| Seal Diameter | 56 mm |
| Internal Teeth, wheel side | 23 |
| Number of Teeth, ABS ring | 44 |
| Length | 164 mm |
| Placement on Vehicle | Wheel Side, Front Axle |
| Function | Joint Kit, drive shaft |
| Outer diameter | 82 mm |
| External Thread Size | M24 x 1,5 |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 225 mm |
| Function | Clutch Kit |
| Multi-piece | Three-piece |
| Number of Teeth | 22 |
| Additional Information 2 | with clutch release bearing |
| Additional Information | with synthetic grease |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Disc (ADM53112)
- 1x Blue Print Clutch Release Bearing (ADM53309)
Important compatibility info
| Outer diameter | 225 mm |
| Function | Clutch Kit |
| Multi-piece | Three-piece |
| Number of Teeth | 22 |
| Additional Information 2 | with clutch release bearing |
| Additional Information | with synthetic grease |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Disc (ADM53112)
- 1x Blue Print Clutch Release Bearing (ADM53309)
Important compatibility info
| Inspection Tag | E9-103R |
| Includes fitting kit | FK90431B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| To be used with part number(s) | FK90431 |
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Product met | Euro 2 |
| Material | Ceramic |
Important compatibility info
| Inspection Tag | E9-103R |
| Includes fitting kit | FK90431B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| To be used with part number(s) | FK90431 |
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Product met | Euro 2 |
| Material | Ceramic |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 24.1 x 21.4 |
| Outer diameter | 235 mm |
| Function | Clutch Kit |
| Number of Teeth | 21 |
| Type | Clutch Kit |
| Replaces | HK6587 |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 24.1 x 21.4 |
| Outer diameter | 235 mm |
| Function | Clutch Kit |
| Number of Teeth | 21 |
| Type | Clutch Kit |
| Replaces | HK6587 |
Important compatibility info
| Hub Profile | 22.7 x 20.2 |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Number of Teeth | 20 |
| Additional Information | with central slave cylinder |
Important compatibility info
| Hub Profile | 22.7 x 20.2 |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Number of Teeth | 20 |
| Additional Information | with central slave cylinder |
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.8 kW |
| Type | Starter |
| Manufacturer Restriction | Denso |
| Function | Starter |
| Voltage | 12 V |
| Number of Teeth | 9 |
| Weight | 5.06 kg |
| Length | 27 cm |
| Height | 13.59 cm |
| Width | 16.21 cm |
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.8 kW |
| Type | Starter |
| Manufacturer Restriction | Denso |
| Function | Starter |
| Voltage | 12 V |
| Number of Teeth | 9 |
| Weight | 5.06 kg |
| Length | 27 cm |
| Height | 13.59 cm |
| Width | 16.21 cm |
Important compatibility info
| Alternator Charge Current | 110 A |
| Number of Ribs | 7 |
| Voltage | 12 V |
| Manufacturer Restriction | Bosch |
| Function | Alternator |
| Type | Alternator |
| Manufacturer | FORD TAXI |
| Model | TRANSIT TX |
| Pulleys | with freewheel belt pulley |
Important compatibility info
| Alternator Charge Current | 110 A |
| Number of Ribs | 7 |
| Voltage | 12 V |
| Manufacturer Restriction | Bosch |
| Function | Alternator |
| Type | Alternator |
| Manufacturer | FORD TAXI |
| Model | TRANSIT TX |
| Pulleys | with freewheel belt pulley |
Important compatibility info
| Diameter | 240 mm |
| Type | Clutch Kit |
| Additional Information | with central slave cylinder |
| Function | Clutch Kit |
Important compatibility info
| Diameter | 240 mm |
| Type | Clutch Kit |
| Additional Information | with central slave cylinder |
| Function | Clutch Kit |
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 3 |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 3 |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 3 |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 3 |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Labels & Certifications | Euro 3 |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Labels & Certifications | Euro 3 |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 3 |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 3 |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Labels & Certifications | Euro 4 |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Labels & Certifications | Euro 4 |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 4 |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Labels & Certifications | Euro 4 |
| Type | Catalytic Converter |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Labels & Certifications | Euro 4 |
Additional Information
Important compatibility info
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Labels & Certifications | Euro 4 |
Additional Information
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
























