Important compatibility info
| Width | 27 mm |
| Diameter | 60 mm |
| Additional Information 2 | with damping |
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
Important compatibility info
| Width | 27 mm |
| Diameter | 60 mm |
| Additional Information 2 | with damping |
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
Important compatibility info
| Function | Alternator |
| Alternator Charge Current | 140 A |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Manufacturer Restriction | Valeo |
| Type | Alternator |
| Weight | 6.25 kg |
| Length | 23.5 cm |
| Height | 16.99 cm |
| Width | 18.49 cm |
Important compatibility info
| Function | Alternator |
| Alternator Charge Current | 140 A |
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Manufacturer Restriction | Valeo |
| Type | Alternator |
| Weight | 6.25 kg |
| Length | 23.5 cm |
| Height | 16.99 cm |
| Width | 18.49 cm |
Important compatibility info
| Function | Clutch Kit |
| Type | Clutch Kit |
| Manufacturer Restriction | Borg & Beck Flywheel |
Important compatibility info
| Function | Clutch Kit |
| Type | Clutch Kit |
| Manufacturer Restriction | Borg & Beck Flywheel |
Important compatibility info
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Piston Diameter | 31.7 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Piston Diameter | 31.7 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Net weight | 0.230 kg |
| Function | Ignition Coil |
| Resistance | 0.9 Ohm |
| Connector Shape | Oval |
| Number of Inlets / Outlets | 1 |
| Number of Poles | 2 -pin connector |
| Voltage | 12 V |
| Additional Information 2 | with cable |
| Weight | 0.3 kg |
| Type | Ignition Coil |
Important compatibility info
| Net weight | 0.230 kg |
| Function | Ignition Coil |
| Resistance | 0.9 Ohm |
| Connector Shape | Oval |
| Number of Inlets / Outlets | 1 |
| Number of Poles | 2 -pin connector |
| Voltage | 12 V |
| Additional Information 2 | with cable |
| Weight | 0.3 kg |
| Type | Ignition Coil |
Important compatibility info
| Additional Information | with central slave cylinder |
| Number of Teeth | 21 |
| Hub Profile | 22x24 |
| Friction Lining Outer Diameter | 225 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Extra Description | 3-1 Kit |
Additional Information
- 1x Quinton Hazell Clutch Kit (QKT4882AF)
- 1x Quinton Hazell Central Slave Cylinder, clutch (CSC052)
Important compatibility info
| Additional Information | with central slave cylinder |
| Number of Teeth | 21 |
| Hub Profile | 22x24 |
| Friction Lining Outer Diameter | 225 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Extra Description | 3-1 Kit |
Additional Information
- 1x Quinton Hazell Clutch Kit (QKT4882AF)
- 1x Quinton Hazell Central Slave Cylinder, clutch (CSC052)
Important compatibility info
| Type | Water Pump, engine cooling |
| Pulleys | for v-ribbed belt pulley |
| Function | Water Pump, engine cooling |
Important compatibility info
| Type | Water Pump, engine cooling |
| Pulleys | for v-ribbed belt pulley |
| Function | Water Pump, engine cooling |
Important compatibility info
| Net weight | 0.430 kg |
| Extra Description | Kerr Nelson |
| Function | Fuel Pump |
| Housing Colour | Black |
| Plug Type | Female |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Placement on Vehicle | Fuel Line |
| Weight | 0.730 kg |
| Type | Fuel Pump |
Important compatibility info
| Net weight | 0.430 kg |
| Extra Description | Kerr Nelson |
| Function | Fuel Pump |
| Housing Colour | Black |
| Plug Type | Female |
| Number of Inlets / Outlets | 2 |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Placement on Vehicle | Fuel Line |
| Weight | 0.730 kg |
| Type | Fuel Pump |
Important compatibility info
| Extra Description | Approved |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Placement on Vehicle | Front |
| Type | Catalytic Converter |
| To be used with part number(s) | FK80307 |
| Product met | Euro 4 |
| Material | Ceramic |
Important compatibility info
| Extra Description | Approved |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Placement on Vehicle | Front |
| Type | Catalytic Converter |
| To be used with part number(s) | FK80307 |
| Product met | Euro 4 |
| Material | Ceramic |
Important compatibility info
Important compatibility info
| Other Part Number | CT1051 K2, CT1051 |
| Width | 30 mm |
| Number of Teeth | 141 |
| Packaging height | 9.5 cm |
| Packaging length | 26.5 cm |
| Packaging width | 16.5 cm |
| Weight | 2.11 kg |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Inner diameter | 12 mm |
| Units / Pulleys | incl. deflection pulley |
Additional Information
Technical Information
Please note: Technical Info in the attachment
Technical Information
Appropriate crankshaft bolt(s) available separately. See sec Appropriate crankshaft bolt(s) available separately. See tion belt pulley crankshaft (bolt set) section belt pulley crankshaft (bolt set)
- 1x Continental Timing Belt (CT1051)
- 1x Continental Tensioner Pulley, timing belt (V55766)
- 1x Continental Deflection Pulley/Guide Pulley, timing belt (V55735)
- 1x Continental Deflection Pulley/Guide Pulley, timing belt (V56303)
- 1x Continental Nut (V31183)
- 1x Continental Nut (V31211)
- 1x Continental Screw (V41140)
- 1x Continental Screw (V41151)
- 1x Continental Screw (V41216)
Important compatibility info
| Other Part Number | CT1051 K2, CT1051 |
| Width | 30 mm |
| Number of Teeth | 141 |
| Packaging height | 9.5 cm |
| Packaging length | 26.5 cm |
| Packaging width | 16.5 cm |
| Weight | 2.11 kg |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Inner diameter | 12 mm |
| Units / Pulleys | incl. deflection pulley |
Additional Information
Technical Information
Please note: Technical Info in the attachment
Technical Information
Appropriate crankshaft bolt(s) available separately. See sec Appropriate crankshaft bolt(s) available separately. See tion belt pulley crankshaft (bolt set) section belt pulley crankshaft (bolt set)
- 1x Continental Timing Belt (CT1051)
- 1x Continental Tensioner Pulley, timing belt (V55766)
- 1x Continental Deflection Pulley/Guide Pulley, timing belt (V55735)
- 1x Continental Deflection Pulley/Guide Pulley, timing belt (V56303)
- 1x Continental Nut (V31183)
- 1x Continental Nut (V31211)
- 1x Continental Screw (V41140)
- 1x Continental Screw (V41151)
- 1x Continental Screw (V41216)
Important compatibility info
| Function | Master Cylinder, clutch |
| Number of Connectors / Ports | 2 |
| Bore Diameter | 24 mm |
| Fill Medium | Mineral Oil |
| Additional Information 2 | with sensor |
| Number of circuits | 1 |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Master Cylinder, clutch |
| Number of Connectors / Ports | 2 |
| Bore Diameter | 24 mm |
| Fill Medium | Mineral Oil |
| Additional Information 2 | with sensor |
| Number of circuits | 1 |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Steel |
| Colour | black |
| Type | Mounting Tools, timing belt |
| Function | Mounting Tools, timing belt |
| Extra Description | Carlyle |
| Number of Parts | 8 -part |
| Title | 6 Pc Engine Locking Tool - Belt In Oil PSA |
Additional Information
- Citroën, Peugeot, Toyota, Vauxhall/Opel
- Citroën: Berlingo III, Berlingo IV, C-Elysee, C1 II, C3 Aircross, C3 III / C3 Picasso, C3 IV, C4 Cactus, C4 II, C4 Picasso/Grand Picasso, C4 Space Tourer/Grand Space Tourer, C5 Aircross, DS3 / DS3 Cabrio, DS4, Peugeot: 108, 2008, 208, 3008, 301, 308, 5008, 508, Partner III, Partner IV, Rifter, Toyota: Aygo, Vauxhall/Opel: Combo-E Crossland X, Grandland X
- EB0 (ZMZ), EB0F (ZMZ), 1PP (HM01), B12XHT, D12XHL, D12XHT, EB2 (HMT), EB2 (HMW), EB2 (HMZ), EB2ADT, EB2ADT (HNP), EB2ADT (HNP) / LES / D12XHT, EB2ADT / LES, EB2ADTD, EB2ADTD (HNK), EB2ADTS, EB2ADTS (HNS), EB2ADTS (HNS) / LES / D12, EB2ADTS (HNS) / LES / D12XHT, EB2ADTS / LEG, EB2ADTX, EB2ADTX (HNN) EB2D (HMU), EB2DT (HNV), EB2DT (HNX), EB2DT (HNZ), EB2DT / LES, EB2DTM (HNV), EB2DTS (HNW), EB2DTS (HNY), EB2DTS / LEG, EB2DTS / LES / B12XHT, EB2DTSD (HNX), EB2DTSM (HNW), EB2F (HMT), EB2F (HMX), EB2F (HMZ), EB2F / LEZ, EB2FA (HMR), EB2FA / LEZ, EB2FAD (HMH) ,EB2FAD (HMM), EB2FB (HMP), EB2FD (HMU) EB2M (HMV), EB2M (HMY), HN02
- Equivalent to OE Reference: 0109-2A, 0109-2B, 0109-6, 16 431 900 80, EN-52127-1, EN-52127-2, EN-52809, G-0109-6
- AST5148A contains the setting / locking tools required for engine valve timing applications on all 1.0 & 1.2 'EB' series belt-in-oil (commonly referred to as 'wet belt') petrol engines fitted in models across the Citroën-Peugeot range as well as shared platform models in the Opel/Vauxhall and Toyota ranges.
Important compatibility info
| Material | Steel |
| Colour | black |
| Type | Mounting Tools, timing belt |
| Function | Mounting Tools, timing belt |
| Extra Description | Carlyle |
| Number of Parts | 8 -part |
| Title | 6 Pc Engine Locking Tool - Belt In Oil PSA |
Additional Information
- Citroën, Peugeot, Toyota, Vauxhall/Opel
- Citroën: Berlingo III, Berlingo IV, C-Elysee, C1 II, C3 Aircross, C3 III / C3 Picasso, C3 IV, C4 Cactus, C4 II, C4 Picasso/Grand Picasso, C4 Space Tourer/Grand Space Tourer, C5 Aircross, DS3 / DS3 Cabrio, DS4, Peugeot: 108, 2008, 208, 3008, 301, 308, 5008, 508, Partner III, Partner IV, Rifter, Toyota: Aygo, Vauxhall/Opel: Combo-E Crossland X, Grandland X
- EB0 (ZMZ), EB0F (ZMZ), 1PP (HM01), B12XHT, D12XHL, D12XHT, EB2 (HMT), EB2 (HMW), EB2 (HMZ), EB2ADT, EB2ADT (HNP), EB2ADT (HNP) / LES / D12XHT, EB2ADT / LES, EB2ADTD, EB2ADTD (HNK), EB2ADTS, EB2ADTS (HNS), EB2ADTS (HNS) / LES / D12, EB2ADTS (HNS) / LES / D12XHT, EB2ADTS / LEG, EB2ADTX, EB2ADTX (HNN) EB2D (HMU), EB2DT (HNV), EB2DT (HNX), EB2DT (HNZ), EB2DT / LES, EB2DTM (HNV), EB2DTS (HNW), EB2DTS (HNY), EB2DTS / LEG, EB2DTS / LES / B12XHT, EB2DTSD (HNX), EB2DTSM (HNW), EB2F (HMT), EB2F (HMX), EB2F (HMZ), EB2F / LEZ, EB2FA (HMR), EB2FA / LEZ, EB2FAD (HMH) ,EB2FAD (HMM), EB2FB (HMP), EB2FD (HMU) EB2M (HMV), EB2M (HMY), HN02
- Equivalent to OE Reference: 0109-2A, 0109-2B, 0109-6, 16 431 900 80, EN-52127-1, EN-52127-2, EN-52809, G-0109-6
- AST5148A contains the setting / locking tools required for engine valve timing applications on all 1.0 & 1.2 'EB' series belt-in-oil (commonly referred to as 'wet belt') petrol engines fitted in models across the Citroën-Peugeot range as well as shared platform models in the Opel/Vauxhall and Toyota ranges.
Important compatibility info
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Material | Cast Iron |
| Piston Diameter | 31.7 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Disc Type | Vented |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Piston diameter 1 | 40 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS6, BSC1 |
| Placement on Vehicle | Rear Axle Right |
| Material | Grey Cast Iron |
| Manufacturer | MERCEDES |
| for brake disc thickness | 22 mm |
Important compatibility info
| Brake Disc Type | Vented |
| Brake System | ATE |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Piston diameter 1 | 40 mm |
| Type | Brake Caliper |
| Part number of recommended accessories | BBS6, BSC1 |
| Placement on Vehicle | Rear Axle Right |
| Material | Grey Cast Iron |
| Manufacturer | MERCEDES |
| for brake disc thickness | 22 mm |
Important compatibility info
| Multi-piece | Three-piece |
| Type | Clutch Kit |
| Additional Information | with synthetic grease |
| Outer diameter | 241 mm |
| Clutch | Replacement for self-adjusting clutch pressure plate |
| Additional Information 2 | with release fork, with clutch release bearing |
| Function | Clutch Kit |
| Extra Description | SMARTFIT Solution Kit |
| Number of Teeth | 22 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADBP320019)
- 1x Blue Print Clutch Disc (ADBP310018)
- 1x Blue Print Clutch Release Bearing (ADBP330010)
- 1x Blue Print Release Fork, clutch (ADBP330011)
Important compatibility info
| Multi-piece | Three-piece |
| Type | Clutch Kit |
| Additional Information | with synthetic grease |
| Outer diameter | 241 mm |
| Clutch | Replacement for self-adjusting clutch pressure plate |
| Additional Information 2 | with release fork, with clutch release bearing |
| Function | Clutch Kit |
| Extra Description | SMARTFIT Solution Kit |
| Number of Teeth | 22 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADBP320019)
- 1x Blue Print Clutch Disc (ADBP310018)
- 1x Blue Print Clutch Release Bearing (ADBP330010)
- 1x Blue Print Release Fork, clutch (ADBP330011)
Important compatibility info
| Number of Inlets / Outlets | 2 |
| Net weight | 0.188 kg |
| Type | Nozzle and Holder Assembly |
| Manufacturer Restriction | Bosch |
| Function | Nozzle and Holder Assembly |
| Replaces | LDI090 |
Important compatibility info
| Number of Inlets / Outlets | 2 |
| Net weight | 0.188 kg |
| Type | Nozzle and Holder Assembly |
| Manufacturer Restriction | Bosch |
| Function | Nozzle and Holder Assembly |
| Replaces | LDI090 |
Important compatibility info
| Additional Information 2 | with integrated ABS sensor |
| Rim Hole Number | 5 -Hole |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Flange Diameter | 161.7 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
- 1x SKF Bearing (SKF01294)
- 4x SKF Screw (SKF00261)
Important compatibility info
| Additional Information 2 | with integrated ABS sensor |
| Rim Hole Number | 5 -Hole |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Flange Diameter | 161.7 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
- 1x SKF Bearing (SKF01294)
- 4x SKF Screw (SKF00261)
Important compatibility info
| Includes fitting kit | FK91499B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E57-103R |
| Placement on Vehicle | Front |
| Product met | Euro 4 |
| To be used with part number(s) | FK91499 |
| Material | Ceramic |
Important compatibility info
| Includes fitting kit | FK91499B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Type | Catalytic Converter |
| Inspection Tag | E57-103R |
| Placement on Vehicle | Front |
| Product met | Euro 4 |
| To be used with part number(s) | FK91499 |
| Material | Ceramic |
Important compatibility info
| Function | Alternator |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 54 mm |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Alternator |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 54 mm |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Weight | 0.4 kg |
| Extra Description | Fuel Parts |
| Function | Air Mass Sensor |
| Housing Type | without housing |
| Connector Shape | Oval |
| Number of Poles | 5 -pin connector |
| Additional Information 2 | with integrated air temperature sensor |
| Type | Air Mass Sensor |
Important compatibility info
| Weight | 0.4 kg |
| Extra Description | Fuel Parts |
| Function | Air Mass Sensor |
| Housing Type | without housing |
| Connector Shape | Oval |
| Number of Poles | 5 -pin connector |
| Additional Information 2 | with integrated air temperature sensor |
| Type | Air Mass Sensor |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rotation Direction | Anticlockwise rotation |
| Function | Starter |
| Type | Starter |
| Number of Thread Bores | 0 |
| Number of mounting bores | 2 |
| Rated Power | 0.95 kW |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rotation Direction | Anticlockwise rotation |
| Function | Starter |
| Type | Starter |
| Number of Thread Bores | 0 |
| Number of mounting bores | 2 |
| Rated Power | 0.95 kW |
Important compatibility info
| Function | Catalytic Converter |
| Product met | Euro 4 |
| Guarantee | 2 years guarantee |
| Includes fitting kit | FK80510B |
| Extra Description | Approved |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| To be used with part number(s) | FK80510 |
| Material | Ceramic |
Important compatibility info
| Function | Catalytic Converter |
| Product met | Euro 4 |
| Guarantee | 2 years guarantee |
| Includes fitting kit | FK80510B |
| Extra Description | Approved |
| Type | Catalytic Converter |
| Inspection Tag | E9-103R |
| To be used with part number(s) | FK80510 |
| Material | Ceramic |
Important compatibility info
| Number of Teeth | 22 |
| Number of Parts | 3 -part |
| Function | Clutch Kit |
| Additional Information | with central slave cylinder |
| Type | Clutch Kit |
Important compatibility info
| Number of Teeth | 22 |
| Number of Parts | 3 -part |
| Function | Clutch Kit |
| Additional Information | with central slave cylinder |
| Type | Clutch Kit |
Important compatibility info
| Length | 150 mm |
| Height | 115 mm |
| Width | 130 mm |
| Rotation Direction | Anticlockwise rotation |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
| Type | Hydraulic Pump, steering |
| for OE number | 1401 926 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 150 mm |
| Height | 115 mm |
| Width | 130 mm |
| Rotation Direction | Anticlockwise rotation |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
| Type | Hydraulic Pump, steering |
| for OE number | 1401 926 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rated Power | 2 kW |
| Number of Teeth | 10 |
| Voltage | 12 V |
| Function | Starter |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rated Power | 2 kW |
| Number of Teeth | 10 |
| Voltage | 12 V |
| Function | Starter |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

























