Important compatibility info
| Material | Aluminium |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Radiator type | Brazed cooling fins |
| Core Length | 628 mm |
| Core Width | 578 mm |
| Core Depth | 26 mm |
Important compatibility info
| Material | Aluminium |
| Type | Radiator, engine cooling |
| Function | Radiator, engine cooling |
| Radiator type | Brazed cooling fins |
| Core Length | 628 mm |
| Core Width | 578 mm |
| Core Depth | 26 mm |
Important compatibility info
| Manufacturer Exclusion | GTC |
| Paired article numbers | OP4107323 |
| Placement on Vehicle | Left |
| Operating Mode | Electric |
| Surface | Primed |
| Outer/Inner Mirror | Heatable, Internal Adjustment |
| Function | Exterior Mirror |
| Type | Exterior Mirror |
Important compatibility info
| Manufacturer Exclusion | GTC |
| Paired article numbers | OP4107323 |
| Placement on Vehicle | Left |
| Operating Mode | Electric |
| Surface | Primed |
| Outer/Inner Mirror | Heatable, Internal Adjustment |
| Function | Exterior Mirror |
| Type | Exterior Mirror |
Important compatibility info
| External Thread Size | M18 x 1,5, M12 x 1,25 |
| Length | 159 mm |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod End |
| Driver Position | for right-hand drive vehicles |
| Spanner Size | 19 |
| Thickness | 86 mm |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M18 x 1,5, M12 x 1,25 |
| Length | 159 mm |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod End |
| Driver Position | for right-hand drive vehicles |
| Spanner Size | 19 |
| Thickness | 86 mm |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Cast Aluminium |
| Function | Water Pump, engine cooling |
| Seal Material | Paper |
| Water pump impeller material | Metal |
| Number of Wings | 6 |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Cast Aluminium |
| Function | Water Pump, engine cooling |
| Seal Material | Paper |
| Water pump impeller material | Metal |
| Number of Wings | 6 |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Catalytic Converter |
| Function | Catalytic Converter |
Additional Information
Important compatibility info
| Type | Catalytic Converter |
| Function | Catalytic Converter |
Additional Information
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 56 mm |
| Current Strength | 120 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 56 mm |
| Current Strength | 120 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Diameter | 230 mm |
| Function | Clutch Kit |
| Additional Information 2 | with clutch release bearing |
| Extra Description | LuK RepSet |
| Type | Clutch Kit |
Additional Information
- 1x LuK Clutch Pressure Plate (123035310)
- 1x LuK Clutch Disc (323037410)
- 1x LuK Clutch Release Bearing (500044010)
Important compatibility info
| Diameter | 230 mm |
| Function | Clutch Kit |
| Additional Information 2 | with clutch release bearing |
| Extra Description | LuK RepSet |
| Type | Clutch Kit |
Additional Information
- 1x LuK Clutch Pressure Plate (123035310)
- 1x LuK Clutch Disc (323037410)
- 1x LuK Clutch Release Bearing (500044010)
Important compatibility info
| Extra Description | Approved |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Product met | Euro 2 |
| To be used with part number(s) | FK90416 |
| Material | Ceramic |
Important compatibility info
| Extra Description | Approved |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Product met | Euro 2 |
| To be used with part number(s) | FK90416 |
| Material | Ceramic |
Important compatibility info
| Length | 793 mm |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 27 |
| External Teeth, Wheel Side | 28 |
| Type | Drive Shaft |
Important compatibility info
| Length | 793 mm |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 27 |
| External Teeth, Wheel Side | 28 |
| Type | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Brake Disc Thickness | 5 mm |
| Number of Holes | 5 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | PRIME - Serie-Oro - Floating Disc |
| Rotor Style | Perforated, two-piece brake disc |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Brake Disc Thickness | 5 mm |
| Number of Holes | 5 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | PRIME - Serie-Oro - Floating Disc |
| Rotor Style | Perforated, two-piece brake disc |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 47 mm |
| Outer diameter | 345 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 30 mm |
| Number of Holes | 5 |
| Minimum thickness | 27.4 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Machining | High-carbon |
| Tightening Torque | 110 Nm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | PRIME LINE - UV Coated |
| Rotor Style | internally vented |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 47 mm |
| Outer diameter | 345 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 30 mm |
| Number of Holes | 5 |
| Minimum thickness | 27.4 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Machining | High-carbon |
| Tightening Torque | 110 Nm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | PRIME LINE - UV Coated |
| Rotor Style | internally vented |
Important compatibility info
| Additional Information | without EGR cooler |
| Additional Information 2 | High-pressure Side |
| Type | Cooler, exhaust gas recirculation |
| Function | Cooler, exhaust gas recirculation |
| Extra Description | Cambiare |
Important compatibility info
| Additional Information | without EGR cooler |
| Additional Information 2 | High-pressure Side |
| Type | Cooler, exhaust gas recirculation |
| Function | Cooler, exhaust gas recirculation |
| Extra Description | Cambiare |
Important compatibility info
| Number of Teeth | 28 |
| Hub Profile | 22.1 x 20.2 |
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
Important compatibility info
| Number of Teeth | 28 |
| Hub Profile | 22.1 x 20.2 |
| Function | Conversion Set, clutch |
| Type | Conversion Set, clutch |
Important compatibility info
| Diameter | 240 mm |
| Function | Clutch Kit |
| Extra Description | LuK RepSet |
| Type | Clutch Kit |
| Additional Information 2 | with clutch release bearing |
Additional Information
- 1x LuK Clutch Pressure Plate (124028910)
- 1x LuK Clutch Disc (324027310)
- 1x LuK Clutch Release Bearing (500075160)
Important compatibility info
| Diameter | 240 mm |
| Function | Clutch Kit |
| Extra Description | LuK RepSet |
| Type | Clutch Kit |
| Additional Information 2 | with clutch release bearing |
Additional Information
- 1x LuK Clutch Pressure Plate (124028910)
- 1x LuK Clutch Disc (324027310)
- 1x LuK Clutch Release Bearing (500075160)
Important compatibility info
| Material | Cast Iron |
| Thread Measurement 1 | M10 |
| Diameter 1 | 23.8 mm |
| Number of Connectors / Ports | 2 |
| Manufacturer Restriction | BOSCH |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
Important compatibility info
| Material | Cast Iron |
| Thread Measurement 1 | M10 |
| Diameter 1 | 23.8 mm |
| Number of Connectors / Ports | 2 |
| Manufacturer Restriction | BOSCH |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
Important compatibility info
| Function | V-Ribbed Belt Set |
| Extra Description | FleetRunner™ Micro-V® |
| Type | V-Ribbed Belt Set |
Additional Information
- 1x Gates V-Ribbed Belt (9PK1887HD)
- 1x Gates Belt Tensioner, v-ribbed belt (T38604)
Important compatibility info
| Function | V-Ribbed Belt Set |
| Extra Description | FleetRunner™ Micro-V® |
| Type | V-Ribbed Belt Set |
Additional Information
- 1x Gates V-Ribbed Belt (9PK1887HD)
- 1x Gates Belt Tensioner, v-ribbed belt (T38604)
Important compatibility info
| Type | Pressure Control Valve, common rail system |
| Function | Pressure Control Valve, common rail system |
| Number of Inlets / Outlets | 1 |
| Housing Colour | Black |
| Net weight | 0.194 kg |
Important compatibility info
| Type | Pressure Control Valve, common rail system |
| Function | Pressure Control Valve, common rail system |
| Number of Inlets / Outlets | 1 |
| Housing Colour | Black |
| Net weight | 0.194 kg |
Important compatibility info
| Extra Description | Approved |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Product met | Euro 2 |
| To be used with part number(s) | FK90765 |
| Material | Ceramic |
Important compatibility info
| Extra Description | Approved |
| Inspection Tag | E9-103R |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Type | Catalytic Converter |
| Product met | Euro 2 |
| To be used with part number(s) | FK90765 |
| Material | Ceramic |
Important compatibility info
| Centering Diameter | 63.5 mm |
| Outer diameter | 325 mm |
| Drill Diameter, up to | 15.8 mm |
| Machining | High-carbon |
| Surface | Coated |
| Bolt Hole Circle Diameter | 107.9 mm |
| Minimum thickness | 28 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 30 mm |
| Height | 52 mm |
| Function | Brake Disc |
| Rotor Style | Vented |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Centering Diameter | 63.5 mm |
| Outer diameter | 325 mm |
| Drill Diameter, up to | 15.8 mm |
| Machining | High-carbon |
| Surface | Coated |
| Bolt Hole Circle Diameter | 107.9 mm |
| Minimum thickness | 28 mm |
| Number of Holes | 5 |
| Brake Disc Thickness | 30 mm |
| Height | 52 mm |
| Function | Brake Disc |
| Rotor Style | Vented |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | OP7157304 |
| Type | Exterior Mirror |
| Function | Exterior Mirror |
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | OP7157304 |
| Type | Exterior Mirror |
| Function | Exterior Mirror |
Important compatibility info
| Surface | Coated |
| Centering Diameter | 69 mm |
| Placement on Vehicle | Front Axle |
| Number of Holes | 5 |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.4 mm |
| Tightening Torque | 100 Nm |
| Type | Brake Disc Rotor |
| Rotor Style | internally vented |
| Outer diameter | 321 mm |
| Height | 49 mm |
| Extra Description | PRIME LINE - UV Coated |
| Function | Brake Disc |
Important compatibility info
| Surface | Coated |
| Centering Diameter | 69 mm |
| Placement on Vehicle | Front Axle |
| Number of Holes | 5 |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.4 mm |
| Tightening Torque | 100 Nm |
| Type | Brake Disc Rotor |
| Rotor Style | internally vented |
| Outer diameter | 321 mm |
| Height | 49 mm |
| Extra Description | PRIME LINE - UV Coated |
| Function | Brake Disc |
Important compatibility info
| Voltage | 12 V |
| Rated Power | 1.7 kW |
| Manufacturer Restriction | Denso |
| Type | Starter |
| Number of Teeth | 15 |
| Function | Starter |
Important compatibility info
| Voltage | 12 V |
| Rated Power | 1.7 kW |
| Manufacturer Restriction | Denso |
| Type | Starter |
| Number of Teeth | 15 |
| Function | Starter |
Important compatibility info
| Valve type | Control Valve |
| Function | Pressure Control Valve, common rail system |
| Type | Pressure Control Valve, common rail system |
Important compatibility info
| Valve type | Control Valve |
| Function | Pressure Control Valve, common rail system |
| Type | Pressure Control Valve, common rail system |
Important compatibility info
| Additional Information | without central slave cylinder |
| Number of Teeth | 21 |
| Weight | 6.07 kg |
| Hub Profile | 24,8 x 21,1 |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Extra Description | KIT2P with High Efficiency Clutch |
| External diameter, clutch pressure plate | 240 mm |
Additional Information
General Information
Valeo Clutch Kit with hydraulic bearing also available
Important compatibility info
| Additional Information | without central slave cylinder |
| Number of Teeth | 21 |
| Weight | 6.07 kg |
| Hub Profile | 24,8 x 21,1 |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Extra Description | KIT2P with High Efficiency Clutch |
| External diameter, clutch pressure plate | 240 mm |
Additional Information
General Information
Valeo Clutch Kit with hydraulic bearing also available
Important compatibility info
| Type | Throttle body |
| Connector Shape | D Shape |
| Number of Poles | 7 -pin connector |
| Function | Throttle body |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
























