Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Oxygen Sensor |
| Lambda Sensor | Heated |
| Placement on Vehicle | after catalytic converter |
| Cable Length | 440 mm |
| External Thread Size | M18 x 1,5 |
| Function | Oxygen Sensor |
| Number of circuits | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.02
Important compatibility info
| Additional Information | with nuts |
| External Thread Size | M20 x 1,5 |
| Function | Centre Rod Assembly |
| Rod/Strut | Guide Rod |
| Length | 686 mm |
| Placement on Vehicle | Rear Axle |
| Extra Description | ProKit |
| Diameter 1 | 48 mm |
| Cone Size | 28.6 mm. 32 mm |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.00
Important compatibility info
| Additional Information | with piston |
| Port / Connector type | - |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.00
Important compatibility info
| Function | Tensioner, timing belt |
| for OE number | 9135033 |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.98
Important compatibility info
| Placement on Vehicle | Front Axle Right, Rear Axle Left |
| Length | 232 mm |
| Width | 165 mm |
| Material | Rubber/Metal |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.97
Important compatibility info
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| Additional Information 2 | with screw |
| Inner diameter | 32 mm |
| Width | 73 mm |
| Outer diameter | 153 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (171097)
- 1x Febi Centering Bolt, crankshaft pulley (33655)
£99.94
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 142 |
| Timing Chain Size | Z53H |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.93
Important compatibility info
| Placement on Vehicle | Right Front, Lower |
| Additional Information | with rubber mounts, with lock nut |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 196497 |
| Cone Size | 16 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 23.5 mm |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.93
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 40314 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (29253)
- 1x Febi Screw (36678)
- 1x Febi Nut (34653)
- 1x Febi Nut (38356)
£99.92
Important compatibility info
| Rotor Style | perforated/vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Thickness | 46.6 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.90
Important compatibility info
| Length | 150 mm |
| Height | 115 mm |
| Width | 150 mm |
| Rotation Direction | Anticlockwise rotation |
| Number of Connectors / Ports | 2 |
| Pressure | 180 bar |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5, M26 x 1,5 |
| Type | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.90
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 491 mm |
| Min. Length | 315 mm |
| Pipe Diameter | 70 mm. 75 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.89
Important compatibility info
| Additional Information | with electric motor |
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 183229 |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.89
Important compatibility info
| for OE number | 960 300 00 04 |
| Operating Mode | Electronic |
| Type | Accelerator Pedal |
| Function | Accelerator Pedal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.77
Important compatibility info
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 132 |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.74
Important compatibility info
| Material | NBR (nitrile butadiene rubber), Steel, EPDM (ethylene propylene diene Monomer (M-class) rubber), PTFE (polytetrafluoroethylene) |
| Function | Gasket Set, steering gear |
| Type | Gasket Set, steering gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 660 mm |
| Material | Steel |
| Steering arm type | Trailing Arm |
| Bore Diameter | 16.6 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 111 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Placement on Vehicle | Rear |
| Number of Connectors / Ports | 6 |
| Type | Solenoid Valve, air suspension |
| Function | Solenoid Valve, air suspension |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 179451 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.69
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 29 |
| Min. Length | 773 mm |
| Wheel Sided Joint Diameter | 63 mm |
| Transmission-side joint diameter | 95 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.69
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 179452 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.69
Important compatibility info
| Refrigerant | R 134a, R 1234yf |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 451 mm |
| Core Width | 670 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.69
Important compatibility info
| Seal Material | Rubber |
| Number of grooves | 6 |
| Function | Water Pump, engine cooling |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Additional Information 2 | switchable water pump |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.68
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Length | 160 mm |
| Width | 47 mm. 65 mm |
| Colour | Black |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 4 |
| Function | Gear Lever Knob |
| Type | Gear Lever Knob |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.68
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 82 00 902 955 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.67
Important compatibility info
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 134 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (40398)
- 1x Febi Tensioner, timing chain (36298)
- 1x Febi Guide, timing chain (108914)
- 1x Febi Guide, timing chain (108915)
£99.66
Important compatibility info
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Material | Aluminium |
| Piston Diameter | 23.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.65
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| External Teeth, Diff.Side | 22 |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 24 |
| Transmission-side joint diameter | 79 mm |
| Wheel Sided Joint Diameter | 83.8 mm |
| Min. Length | 958 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.64
Important compatibility info
| Water pump impeller material | Metal |
| Additional Information | with gasket/seal |
| Function | Water Pump, engine cooling |
| Additional Information 2 | switchable water pump |
| Seal Material | Rubber/Metal |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.64
Important compatibility info
| Function | Drive Shaft |
| External Teeth, Diff.Side | 28 |
| Min. Length | 964 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Transmission-side joint diameter | 87.5 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Wheel Side | 40 |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.64
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Outer diameter | 75 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| for OE number | 059 145 201 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.64
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Paired article numbers | 36689 |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.62
Important compatibility info
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
| Outer diameter | 313 mm |
| Height | 207 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.61
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 4M0 199 371 GD |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.61
Important compatibility info
| Length | 1920 mm |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt Set |
| Extra Description | ProKit |
| Type | V-Ribbed Belt Set |
| Additional Information 2 | with tensioner element |
| Units / Pulleys | incl. deflection pulley |
| Number of Deflection Rollers | 2 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Deflection/Guide Pulley, v-ribbed belt (30389)
- 1x Febi Belt Tensioner, v-ribbed belt (27135)
- 1x Febi V-Ribbed Belt (34136)
£99.61
Important compatibility info
| Number of Holes | 16 |
| Inner diameter | 6.9 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right |
| Function | Brake Shoe |
| Type | Brake Shoe |
| Brake Pad | without lining |
| Width | 203 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.59
Important compatibility info
| Rotor Style | slotted/perforated, internally vented |
| Rim Hole Number | 5 -Hole |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 390 mm |
| Thickness | 54.3 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 34 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.57
Important compatibility info
| Type | Door Lock, driver cab |
| Function | Door Lock, driver cab |
| Internal Thread Size | M10 x 1 |
| Additional Information 2 | without switch |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.57
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Placement on Vehicle | Left |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 49424 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.54
Important compatibility info
| Outer diameter 2 | 175 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 130 mm |
| Function | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Inner diameter | 41.5 mm |
| Outer diameter | 98 mm |
| Width | 62 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter 1 | 85 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring, with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.53
Important compatibility info
| Number of Connectors / Ports | 12 |
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.53
Important compatibility info
| Number of Connectors / Ports | 5 |
| Extra Description | febi Plus |
| Function | Resistor, interior blower |
| Weight | 0.20 kg |
| Type | Resistor, interior blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.52
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.51
Important compatibility info
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Wheel Side | 31 |
| Thread Size | M24x2,0 |
| Min. Length | 1093 mm |
| External Teeth, Diff.Side | 41 |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 99 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.49
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 887 mm |
| Outer diameter | 52 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.49
Important compatibility info
| Inner diameter | 19 mm |
| Outer diameter | 135 mm |
| Width | 135 mm |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| Parameter | 6PK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.48
Important compatibility info
| Function | Shock Absorber |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 869 mm |
| Min. Length | 521 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.45
Important compatibility info
| Additional Information 2 | with bearing |
| Additional Information | with kingpin |
| Outer diameter | 54 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (15864)
- 4x Febi Bush, steering knuckle (15858)
- 1x Febi Seal Ring, steering knuckle (15859)
- 1x Febi Bush, steering knuckle (15860)
£99.43
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 614 mm |
| Wheel Sided Joint Diameter | 90.9 mm |
| Transmission-side joint diameter | 85 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.41
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Function | Alternator |
| Type | Alternator |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 50 mm |
| for OE number | 038 903 018 R |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.41
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023