Important compatibility info
| Replaces | ADN132103N |
| Outer diameter | 252 mm |
| Function | Clutch Pressure Plate |
| Type | Clutch Pressure Plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Replaces | ADN132103N |
| Outer diameter | 252 mm |
| Function | Clutch Pressure Plate |
| Type | Clutch Pressure Plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 220 mm |
| Core Width | 195 mm |
| Core Depth | 33 mm |
| Gross Weight | 1800 g |
| Weight | 1100 g |
Important compatibility info
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 220 mm |
| Core Width | 195 mm |
| Core Depth | 33 mm |
| Gross Weight | 1800 g |
| Weight | 1100 g |
Important compatibility info
| Function | Camshaft |
| Type | Camshaft |
| for OE number | 075 109 101 C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Camshaft |
| Type | Camshaft |
| for OE number | 075 109 101 C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M16 x 1,5 |
| Paired article numbers | 188150 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 28 |
| Min. Length | 820 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 75.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M16 x 1,5 |
| Paired article numbers | 188150 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 28 |
| Min. Length | 820 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 75.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 31 |
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 40 |
| Length | 528 mm |
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 31 |
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 40 |
| Length | 528 mm |
Important compatibility info
| Type | Condenser, air conditioning |
| Core Depth | 41 mm |
| Manufacturer Restriction | Valeo |
| Function | Condenser, air conditioning |
| Core Length | 480 mm |
| Core Width | 414 mm |
| Inlet Diameter | 11.7 mm |
| Outlet Diameter | 9 mm |
| Additional Information 2 | with dryer |
| Material | Aluminium |
Important compatibility info
| Type | Condenser, air conditioning |
| Core Depth | 41 mm |
| Manufacturer Restriction | Valeo |
| Function | Condenser, air conditioning |
| Core Length | 480 mm |
| Core Width | 414 mm |
| Inlet Diameter | 11.7 mm |
| Outlet Diameter | 9 mm |
| Additional Information 2 | with dryer |
| Material | Aluminium |
Important compatibility info
| Piston Diameter | 17 mm |
| Inner Brake Drum Diameter | 203 mm |
| Width | 32 mm |
| Additional Information | with wheel brake cylinder |
| Additional Information 2 | with mounting manual |
| Mounting Type | Pre-assembled |
| Adjustment | with automatic adjustment |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Piston Diameter | 17 mm |
| Inner Brake Drum Diameter | 203 mm |
| Width | 32 mm |
| Additional Information | with wheel brake cylinder |
| Additional Information 2 | with mounting manual |
| Mounting Type | Pre-assembled |
| Adjustment | with automatic adjustment |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Length | 404 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | QSA2735S |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Right, Lower |
Important compatibility info
| Length | 404 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | QSA2735S |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Right, Lower |
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | QSA2817S |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Lower |
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | QSA2817S |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Lower |
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | QSA2816S |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | QSA2816S |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Important compatibility info
| Function | Starter |
| Number of Thread Bores | 2 |
| Number of mounting bores | 2 |
| Rated Power | 1.4 kW |
| Number of Teeth | 11 |
| Voltage | 12 V |
| Type | Starter |
| Weight | 4.08 kg |
| Length | 27 cm |
| Manufacturer Restriction | Bosch |
| Height | 13.59 cm |
| Width | 16.21 cm |
Important compatibility info
| Function | Starter |
| Number of Thread Bores | 2 |
| Number of mounting bores | 2 |
| Rated Power | 1.4 kW |
| Number of Teeth | 11 |
| Voltage | 12 V |
| Type | Starter |
| Weight | 4.08 kg |
| Length | 27 cm |
| Manufacturer Restriction | Bosch |
| Height | 13.59 cm |
| Width | 16.21 cm |
Important compatibility info
| Number of Poles | 3 -pin connector |
| Operating Mode | Electric |
| Connector Shape | Rectangular |
| Function | EGR Valve |
| Type | EGR Valve |
Important compatibility info
| Number of Poles | 3 -pin connector |
| Operating Mode | Electric |
| Connector Shape | Rectangular |
| Function | EGR Valve |
| Type | EGR Valve |
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Additional Information
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Net weight | 5.6 kg |
| Paired article numbers | 5011012 |
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Net weight | 5.6 kg |
| Paired article numbers | 5011012 |
Important compatibility info
| Alternator Charge Current | 100 A |
| Pulleys | with freewheel belt pulley |
| Type | Alternator |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Function | Alternator |
| Manufacturer Restriction | Denso |
| Weight | 5.09 kg |
| Length | 20.9 cm |
| Height | 18.01 cm |
| Width | 18.49 cm |
Important compatibility info
| Alternator Charge Current | 100 A |
| Pulleys | with freewheel belt pulley |
| Type | Alternator |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Function | Alternator |
| Manufacturer Restriction | Denso |
| Weight | 5.09 kg |
| Length | 20.9 cm |
| Height | 18.01 cm |
| Width | 18.49 cm |
Important compatibility info
| Pulleys | with freewheel belt pulley |
| Number of Poles | 2 -pin connector |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Alternator Charge Current | 120 A |
| Type | Alternator |
| Manufacturer Restriction | Denso |
| Function | Alternator |
| Manufacturer | FIAT VAUXHALL |
Important compatibility info
| Pulleys | with freewheel belt pulley |
| Number of Poles | 2 -pin connector |
| Number of Ribs | 6 |
| Voltage | 12 V |
| Alternator Charge Current | 120 A |
| Type | Alternator |
| Manufacturer Restriction | Denso |
| Function | Alternator |
| Manufacturer | FIAT VAUXHALL |
Important compatibility info
| Caster correction | -3 mm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Lower, Front, Front Axle Right, Front Axle Left |
| Type | Mounting, control/trailing arm |
| for OE number | 213 333 08 00 |
| Material | Rubber/Metal |
| Outer diameter | 79.5 mm |
| Thickness | 80 mm |
| Additional Information 2 | with mounting sleeve |
| Inner diameter | 14.2 mm |
| Paired article numbers | 182263 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Caster correction | -3 mm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Lower, Front, Front Axle Right, Front Axle Left |
| Type | Mounting, control/trailing arm |
| for OE number | 213 333 08 00 |
| Material | Rubber/Metal |
| Outer diameter | 79.5 mm |
| Thickness | 80 mm |
| Additional Information 2 | with mounting sleeve |
| Inner diameter | 14.2 mm |
| Paired article numbers | 182263 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Teeth, Wheel Side | 36 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Length | 525 mm |
| Transmission-side joint diameter | 93 mm |
Important compatibility info
| External Teeth, Wheel Side | 36 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Length | 525 mm |
| Transmission-side joint diameter | 93 mm |
Important compatibility info
| Inspection Tag | E9-103R |
| Product met | Euro 3 |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Type | Catalytic Converter |
| Placement on Vehicle | Front |
| To be used with part number(s) | FK91017 |
| Material | Ceramic |
Important compatibility info
| Inspection Tag | E9-103R |
| Product met | Euro 3 |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Type | Catalytic Converter |
| Placement on Vehicle | Front |
| To be used with part number(s) | FK91017 |
| Material | Ceramic |
Important compatibility info
| Title | EV461 - EV4 Winter Parka Black |
Additional Information
- Drawcord adjustable hem and Dropped back hem for better coverage
- Side zip pockets, Zipped chest pockets and Internal pockets for safe storage
- Waterproof zips to prevent water penetration
- Reflective print for increased visibility and safety
- Engineered with an active fit
- Helmet compatible adjustable hood
- Chunky baffle inner for enhanced comfort
- Flotech™ System for ventilation and added breathability
- Inner soft Insulatex lining offering warmth and comfort
- Vertical and horizontal hood adjustment for customisable fit
- Contemporary design with an ergonomic cut
- Laser cut holes for added ventilation
- Sherpa lined inner side panels for maximum warmth
- Extremely water resistant eco-conscious fabric finish, water beads away from fabric surface
- Waterproof and breathable with taped seams to prevent water penetration
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated ABS sensor |
| Flange Diameter | 139 mm |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle |
Additional Information
- 4x SKF Screw (SKF00266)
- 1x SKF Bearing (SKF01845)
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with integrated ABS sensor |
| Flange Diameter | 139 mm |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle |
Additional Information
- 4x SKF Screw (SKF00266)
- 1x SKF Bearing (SKF01845)
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Flange Diameter | 158.6 mm |
| Placement on Vehicle | Front Axle |
Additional Information
- 1x SKF Nut (SKF04558)
- 1x SKF Bearing (SKF00689)
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Flange Diameter | 158.6 mm |
| Placement on Vehicle | Front Axle |
Additional Information
- 1x SKF Nut (SKF04558)
- 1x SKF Bearing (SKF00689)
Important compatibility info
| Flange Diameter | 138 mm |
| Placement on Vehicle | Front Axle |
| Rim Hole Number | 5 -Hole |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated ABS sensor |
Additional Information
- 1x SKF Nut (SKF04518)
- 1x SKF Bearing (SKF00554)
Important compatibility info
| Flange Diameter | 138 mm |
| Placement on Vehicle | Front Axle |
| Rim Hole Number | 5 -Hole |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated ABS sensor |
Additional Information
- 1x SKF Nut (SKF04518)
- 1x SKF Bearing (SKF00554)
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information 2 | with motor for headlamp levelling |
| Weight | 3.51 kg |
| Paired article numbers | 044895 |
| Bulb Type | H7, H15, W5W |
| Type | Headlight |
| Function | Headlight |
| Extra Description | ORIGINAL PART |
| Vehicle Equipment | for vehicles with headlight levelling (electric) |
| Light Function | with low beam |
| Indicator Colour | transparent |
| Light Design | Halogen |
| Driver Position | for right-hand drive vehicles |
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information 2 | with motor for headlamp levelling |
| Weight | 3.51 kg |
| Paired article numbers | 044895 |
| Bulb Type | H7, H15, W5W |
| Type | Headlight |
| Function | Headlight |
| Extra Description | ORIGINAL PART |
| Vehicle Equipment | for vehicles with headlight levelling (electric) |
| Light Function | with low beam |
| Indicator Colour | transparent |
| Light Design | Halogen |
| Driver Position | for right-hand drive vehicles |
Important compatibility info
| Rated Power | 1.1 kW |
| Fastening hole angle measurement [Degree] | 40 ° |
| Jaw opening angle measurement [Degree] | 320 ° |
| Starter Type | Self-supporting |
| Bore Diameter 2 | 8.6 mm |
| Pinion Rest Position | 17.3 mm |
| Connecting Angle | 40 ° |
| Clamp | 30,50 |
| Position / Degree | links ° |
| Flange Diameter | 68 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 8.6 mm |
| Number of Teeth | 9 |
| Length | 199 mm |
| Function | Starter |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Rated Power | 1.1 kW |
| Fastening hole angle measurement [Degree] | 40 ° |
| Jaw opening angle measurement [Degree] | 320 ° |
| Starter Type | Self-supporting |
| Bore Diameter 2 | 8.6 mm |
| Pinion Rest Position | 17.3 mm |
| Connecting Angle | 40 ° |
| Clamp | 30,50 |
| Position / Degree | links ° |
| Flange Diameter | 68 mm |
| Number of mounting bores | 2 |
| Rotation Direction | Clockwise rotation |
| Bore Diameter | 8.6 mm |
| Number of Teeth | 9 |
| Length | 199 mm |
| Function | Starter |
| Voltage | 12 V |
| Type | Starter |
Important compatibility info
| Additional Information | with fastening/mounting material |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Bearing Type | Ball Bearing |
| Inner diameter | 41 mm |
| Additional Information 2 | with rolling bearing |
| Length | 220 mm |
| Hole Spacing | 193 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
























