Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Quality | OE Exact |
| Colour | silver |
| Operating Mode | Manual |
| Placement on Vehicle | Front, Left |
| Weight | 1.526 g |
Important compatibility info
| Type | Tail Light Assembly |
| Section | Inner Section |
| Function | Tail Light Assembly |
| Registration Type | ECE approved |
| Light Design | LED |
| Number of light functions | 5 |
| Placement on Vehicle | Left |
| Voltage | 12 V |
| Light Function | with taillight (LED), with stop light (LED), with indicator (LED), with rear fog light (LED), with reverse light (LED) |
| Bulb Type | LED |
| Paired article numbers | 2TZ 015 342-921 |
| Left-hand / Right-hand Traffic | for right-hand traffic, for left-hand traffic |
| Additionally Required Parts | 2SD 015 341-931 |
Important compatibility info
| Type | Tail Light Assembly |
| Section | Inner Section |
| Function | Tail Light Assembly |
| Registration Type | ECE approved |
| Light Design | LED |
| Number of light functions | 5 |
| Placement on Vehicle | Left |
| Voltage | 12 V |
| Light Function | with taillight (LED), with stop light (LED), with indicator (LED), with rear fog light (LED), with reverse light (LED) |
| Bulb Type | LED |
| Paired article numbers | 2TZ 015 342-921 |
| Left-hand / Right-hand Traffic | for right-hand traffic, for left-hand traffic |
| Additionally Required Parts | 2SD 015 341-931 |
Important compatibility info
| Title | Power Inverter - 12V to 230V - 1500W |
Additional Information
- Connects directly to battery
- High speed cooling fan
- Safety features protect against: reverse polarity, over & under voltage, low battery shut down, short circuit, overload and over temperature
- Modified sine wave inverter, converts 12Vdc to 230Vac
Important compatibility info
| Function | Clutch Kit |
| Additional Information | with central slave cylinder |
| Type | Clutch Kit |
| Diameter | 220 mm |
Important compatibility info
| Function | Clutch Kit |
| Additional Information | with central slave cylinder |
| Type | Clutch Kit |
| Diameter | 220 mm |
Important compatibility info
| Function | Clutch Kit |
| Type | Clutch Kit |
| Diameter | 260 mm |
| Additional Information | without central slave cylinder |
| Additional Information 2 | with clutch release bearing |
Important compatibility info
| Function | Clutch Kit |
| Type | Clutch Kit |
| Diameter | 260 mm |
| Additional Information | without central slave cylinder |
| Additional Information 2 | with clutch release bearing |
Important compatibility info
| Diameter | 260 mm |
| Number of Teeth | 26 |
| Type | Clutch Kit |
| Function | Clutch Kit |
Important compatibility info
| Diameter | 260 mm |
| Number of Teeth | 26 |
| Type | Clutch Kit |
| Function | Clutch Kit |
Important compatibility info
| Function | Drive Shaft |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 27 |
| Type | Drive Shaft |
| Length | 660 mm |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| Function | Drive Shaft |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 27 |
| Type | Drive Shaft |
| Length | 660 mm |
| Placement on Vehicle | Front Axle Left |
Important compatibility info
| for steering manufacturer | ZF |
| Pulleys | without belt pulley |
| Additional Information | without reservoir |
| Number of Ribs | 4 |
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| Pressure | 90 bar |
| Belt Pulley Diameter | 123 mm |
| Additional Information 2 | Belt Pulley pressed on |
| Number of grooves | 4 |
Important compatibility info
| for steering manufacturer | ZF |
| Pulleys | without belt pulley |
| Additional Information | without reservoir |
| Number of Ribs | 4 |
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| Pressure | 90 bar |
| Belt Pulley Diameter | 123 mm |
| Additional Information 2 | Belt Pulley pressed on |
| Number of grooves | 4 |
Important compatibility info
| for OE number | 17517617604 |
| Type | Charge Air Cooler |
| Function | Charge Air Cooler |
| Radiator type | Brazed cooling fins |
| Core Length | 585 mm |
| Core Width | 98 mm |
| Core Depth | 95 mm |
| Production Number | EL |
| Cooling Type | air-cooled |
Important compatibility info
| for OE number | 17517617604 |
| Type | Charge Air Cooler |
| Function | Charge Air Cooler |
| Radiator type | Brazed cooling fins |
| Core Length | 585 mm |
| Core Width | 98 mm |
| Core Depth | 95 mm |
| Production Number | EL |
| Cooling Type | air-cooled |
Important compatibility info
Important compatibility info
Important compatibility info
| Port / Connector type | T1 |
| Battery Type Code | 019 EFB |
| Type | Starter Battery |
| Length | 353 mm |
| Voltage | 12 V |
| Cold Cranking Amperage (CCA) | 850 A |
| Terminal Layout | Positive Front Right |
| Function | Starter Battery |
| Height | 190 mm |
| Width | 175 mm |
| Terminal Type | T1 |
| Filled Weight | 24 kg |
| Ampere-Hours | 100 Ah |
| Cold-test Current, EN | 850 A |
| Battery | with handles, with load status display |
| Hold-down Type | B03 |
| Extra Description | YBX7000 EFB Start Stop Plus Batteries |
| Key Words | 850A; 100Ah; 4Yr Warranty; 353x175x190 |
| Suitable for (starter battery) | with central degassing |
| Warranty | 4 year warranty |
Important compatibility info
| Port / Connector type | T1 |
| Battery Type Code | 019 EFB |
| Type | Starter Battery |
| Length | 353 mm |
| Voltage | 12 V |
| Cold Cranking Amperage (CCA) | 850 A |
| Terminal Layout | Positive Front Right |
| Function | Starter Battery |
| Height | 190 mm |
| Width | 175 mm |
| Terminal Type | T1 |
| Filled Weight | 24 kg |
| Ampere-Hours | 100 Ah |
| Cold-test Current, EN | 850 A |
| Battery | with handles, with load status display |
| Hold-down Type | B03 |
| Extra Description | YBX7000 EFB Start Stop Plus Batteries |
| Key Words | 850A; 100Ah; 4Yr Warranty; 353x175x190 |
| Suitable for (starter battery) | with central degassing |
| Warranty | 4 year warranty |
Important compatibility info
| Function | Clutch Pressure Plate |
| Outer diameter | 342 mm |
| Replaces | ADN13249N; ADN13252N |
| Type | Clutch Pressure Plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Clutch Pressure Plate |
| Outer diameter | 342 mm |
| Replaces | ADN13249N; ADN13252N |
| Type | Clutch Pressure Plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inlet Diameter | 12.2 mm |
| Clutch Equipment | without purge pipe |
| Function | Central Slave Cylinder, clutch |
| Base body material | Aluminium |
| Type | Central Slave Cylinder, clutch |
Important compatibility info
| Inlet Diameter | 12.2 mm |
| Clutch Equipment | without purge pipe |
| Function | Central Slave Cylinder, clutch |
| Base body material | Aluminium |
| Type | Central Slave Cylinder, clutch |
Important compatibility info
| Pipe Diameter | 60 mm |
| Function | Tie Rod |
| Type | Tie Rod |
| Length | 1726 mm |
| Thread Size | M24x1.5 |
| for OE number | 5001868363 |
| Adjustable | Adjustable on one side |
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Additional Information 2 | with screw |
| Number of Teeth | 19 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Camshaft Adjuster (171957)
- 1x Febi Bolt, camshaft gear (173250)
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Additional Information 2 | with screw |
| Number of Teeth | 19 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Camshaft Adjuster (171957)
- 1x Febi Bolt, camshaft gear (173250)
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 183419 |
| Number of Connectors / Ports | 2 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 183419 |
| Number of Connectors / Ports | 2 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Window Regulator |
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 183418 |
| Number of Connectors / Ports | 2 |
| Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Window Regulator |
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 183418 |
| Number of Connectors / Ports | 2 |
| Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Net weight | 0.038 kg |
| Extra Description | Kerr Nelson |
| Function | Air Mass Sensor |
| Housing Type | without housing |
| Connector Shape | Rectangular |
| Number of Poles | 5 -pin connector |
| Additional Information 2 | with integrated air temperature sensor, Can only be fitted with original mounting |
| Weight | 0.4 kg |
| Type | Air Mass Sensor |
Important compatibility info
| Net weight | 0.038 kg |
| Extra Description | Kerr Nelson |
| Function | Air Mass Sensor |
| Housing Type | without housing |
| Connector Shape | Rectangular |
| Number of Poles | 5 -pin connector |
| Additional Information 2 | with integrated air temperature sensor, Can only be fitted with original mounting |
| Weight | 0.4 kg |
| Type | Air Mass Sensor |
Important compatibility info
| Net weight | 0.214 kg |
| Housing length | 125 mm |
| Extra Description | Kerr Nelson |
| Function | Air Mass Sensor |
| Housing Diameter | 70 mm |
| Housing Type | with housing |
| Connector Shape | Rectangular |
| Number of Poles | 6 -pin connector |
| Additional Information 2 | with integrated air temperature sensor |
| Weight | 0.4 kg |
| Type | Air Mass Sensor |
Important compatibility info
| Net weight | 0.214 kg |
| Housing length | 125 mm |
| Extra Description | Kerr Nelson |
| Function | Air Mass Sensor |
| Housing Diameter | 70 mm |
| Housing Type | with housing |
| Connector Shape | Rectangular |
| Number of Poles | 6 -pin connector |
| Additional Information 2 | with integrated air temperature sensor |
| Weight | 0.4 kg |
| Type | Air Mass Sensor |
Important compatibility info
| Diameter | 240 mm |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Extra Description | LuK SAC |
| Type | Clutch Kit |
Important compatibility info
| Diameter | 240 mm |
| Adjustment | with automatic adjustment |
| Function | Clutch Kit |
| Extra Description | LuK SAC |
| Type | Clutch Kit |
Important compatibility info
| Function | Tail Light Assembly |
| Section | Inner Section |
| Light Function | without reverse light, with rear fog light |
| Bulb Type | P21W |
| Additional Information 2 | with bulbs |
| Placement on Vehicle | Left |
| Type | Tail Light Assembly |
| Paired article numbers | 710815040020 |
| Quality | O.E. (Original) |
Important compatibility info
| Function | Tail Light Assembly |
| Section | Inner Section |
| Light Function | without reverse light, with rear fog light |
| Bulb Type | P21W |
| Additional Information 2 | with bulbs |
| Placement on Vehicle | Left |
| Type | Tail Light Assembly |
| Paired article numbers | 710815040020 |
| Quality | O.E. (Original) |
Important compatibility info
| Width | 27 mm |
| Diameter | 60 mm |
| Additional Information 2 | with damping |
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
Important compatibility info
| Width | 27 mm |
| Diameter | 60 mm |
| Additional Information 2 | with damping |
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
Important compatibility info
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Additional Information
- 1x Gates Timing Chain (BC116-0A)
- 1x Gates Guide, timing chain (RM1193)
- 1x Gates Guide, timing chain (RM5296)
- 1x Gates Gear/Sprocket, camshaft (GM1065)
- 1x Gates Sprocket, crankshaft (GC1124)
Important compatibility info
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Additional Information
- 1x Gates Timing Chain (BC116-0A)
- 1x Gates Guide, timing chain (RM1193)
- 1x Gates Guide, timing chain (RM5296)
- 1x Gates Gear/Sprocket, camshaft (GM1065)
- 1x Gates Sprocket, crankshaft (GC1124)
Important compatibility info
| Additional Information | with synthetic grease |
| Outer diameter | 237 mm |
| Additional Information 2 | with clutch release bearing |
| Number of Teeth | 21 |
| Multi-piece | Three-piece |
| Function | Clutch Kit |
| Extra Description | SMARTFIT Conversion Service Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with synthetic grease |
| Outer diameter | 237 mm |
| Additional Information 2 | with clutch release bearing |
| Number of Teeth | 21 |
| Multi-piece | Three-piece |
| Function | Clutch Kit |
| Extra Description | SMARTFIT Conversion Service Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Clutch Kit |
| Type | Clutch Kit |
| Manufacturer Restriction | Borg & Beck Flywheel |
Important compatibility info
| Function | Clutch Kit |
| Type | Clutch Kit |
| Manufacturer Restriction | Borg & Beck Flywheel |
Important compatibility info
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Piston Diameter | 31.7 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Piston Diameter | 31.7 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Heat Exchanger, interior heating |
| Core Depth | 26 mm |
| Core Width | 150 mm |
| Core Length | 196 mm |
| Additional Information 2 | without pipe |
| Radiator type | Brazed cooling fins |
| Type | Heat Exchanger, interior heating |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


























