Important compatibility info
| Function | Air Suspension Valve | 
| Type | Air Suspension Valve | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V | 
| Number of Teeth | 13 | 
| Rated Power | 1.6 kW | 
| Type | Starter | 
| Function | Starter | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Sender Unit, fuel tank | 
| Number of Connectors / Ports | 2 | 
| for OE number | 16 11 7 163 295 | 
| Additional Information 2 | with seal ring | 
| Function | Sender Unit, fuel tank | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with piston | 
| Outer diameter | 286 mm. 259 mm | 
| Thickness | 640 mm. 240 mm | 
| Type | Bellow, air suspension | 
| Function | Bellow, air suspension | 
| Rolling piston material | Steel | 
| External Thread Size | M22, M12 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size 2 | 21 mm | 
| Type | Control/Trailing Arm, wheel suspension | 
| Function | Control/Trailing Arm, wheel suspension | 
| Cone Size | 17 mm | 
| Additional Information | with lock nut | 
| Paired article numbers | 185473 | 
| Additional Information 2 | with ball joint, with bearing | 
| Material | Aluminium | 
| Steering arm type | Control Arm | 
| External Thread Size | M14 x 1,5 | 
| Placement on Vehicle | Lower, Front Axle Right, Rear | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V | 
| Number of Teeth | 8 | 
| Rated Power | 0.7 kW | 
| Type | Starter | 
| Function | Starter | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with quick couplers | 
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) | 
| Cooling Hose | from coolant regulator housing to engine cooler | 
| Type | Radiator Hose | 
| Function | Radiator Hose | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Shift Valve, automatic transmission | 
| Function | Shift Valve, automatic transmission | 
| Extra Description | febi Plus | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right | 
| Additional Information 2 | with nut | 
| Thread Size | M24x1,5 | 
| External Teeth, Wheel Side | 27 | 
| External Teeth, Diff.Side | 37 | 
| Number of Teeth, ABS ring | 48 | 
| Min. Length | 954 mm | 
| ABS Ring Diameter | 99 mm | 
| Wheel Sided Joint Diameter | 98 mm | 
| Transmission-side joint diameter | 88.8 mm | 
| Type | Drive Shaft | 
| Function | Drive Shaft | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 30 mm | 
| Function | Timing Belt Kit | 
| Number of Teeth | 178 | 
| Surface | Coated | 
| Type | Timing Belt Kit | 
| Belts | with trapezoidal tooth profile | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (30978)
 - 1x Febi Tensioner Pulley, timing belt (21878)
 - 1x Febi Deflection Pulley/Guide Pulley, timing belt (30980)
 - 1x Febi Bolt, tensioner pulley (196874)
 
Important compatibility info
| Function | Brake Disc | 
| Rotor Style | Internally Vented | 
| Rim Hole Number | 6 -Hole | 
| Placement on Vehicle | Front Axle | 
| Outer diameter | 324 mm | 
| Thickness | 91 mm | 
| Brake Disc Thickness | 30 mm | 
| Minimum thickness | 26 mm | 
| Bolt Hole Circle Diameter | 140 mm | 
| Surface | Coated | 
| Internal Thread Size | M12 x 1,5 | 
| Type | Brake Disc Rotor | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 22 | 
| External Thread Size | M18 x 1,5 | 
| Function | Oxygen Sensor | 
| Type | Oxygen Sensor | 
| Lambda Sensor | Heated | 
| Number of circuits | 4 | 
| Cable Length | 300 mm | 
| Placement on Vehicle | before catalytic converter | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Grey Cast Iron | 
| Additional Information | with gasket/seal | 
| Number of Wings | 7 | 
| Type | Water Pump, engine cooling | 
| Function | Water Pump, engine cooling | 
| Water pump impeller material | Plastic | 
| Seal Material | Rubber | 
| Additional Information 2 | switchable water pump | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with piston | 
| Outer diameter | 252 mm. 311 mm | 
| Thickness | 144 mm. 320 mm | 
| Type | Bellow, air suspension | 
| Function | Bellow, air suspension | 
| Rolling piston material | Steel | 
| External Thread Size | M22 x 1,5, M16 x 2 | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Disc Thickness | 28 mm | 
| Minimum thickness | 26 mm | 
| Rim Hole Number | 5 -Hole | 
| Outer diameter | 330 mm | 
| Number of mounting bores | 1 | 
| Function | Brake Disc | 
| Thickness | 45.1 mm | 
| Centering Diameter | 70 mm | 
| Surface | Coated | 
| Bolt Hole Circle Diameter | 110 mm | 
| Placement on Vehicle | Front Axle | 
| Rotor Style | Internally Vented | 
| Type | Brake Disc Rotor | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right, Upper | 
| Bearing/Mounting Type | Rubber-Metal Mount | 
| Function | Mounting, engine | 
| Type | Mounting, engine | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right | 
| Width | 128 mm | 
| Function | Wheel Bearing Kit | 
| Type | Wheel Bearing Kit | 
| Bearing Type | Angular Ball Bearing | 
| Bolt Hole Circle Diameter | 108 mm | 
| Inner diameter | 30 mm | 
| Additional Information 2 | with ABS sensor ring | 
| Outer diameter | 128 mm | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Left | 
| Material | Sheet Steel | 
| Steering arm type | Control Arm | 
| Paired article numbers | 05271 | 
| Function | Control/Trailing Arm, wheel suspension | 
| Additional Information | with rubber mounts | 
| Type | Control/Trailing Arm, wheel suspension | 
| Additional Information 2 | without ball joint | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Window Regulator | 
| Placement on Vehicle | Left Front | 
| Operating Mode | Electric | 
| Paired article numbers | 27346 | 
| Type | Window Regulator | 
| Additional Information | without electric motor | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Doors | 4 | 
| Placement on Vehicle | Right Front | 
| Operating Mode | Electric | 
| Paired article numbers | 27345 | 
| Function | Window Regulator | 
| Type | Window Regulator | 
| Additional Information | without electric motor | 
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
                  
                
                  
                
                  
                
                  
                
                  
                
                  
                All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


















