Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 96 mm |
| Material | Plastic |
| Outer diameter | 80 mm |
| Inner diameter | 73 mm |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.88
Important compatibility info
| Housing material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Water pump impeller material | Grey Cast Iron |
| Number of Wings | 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Function | Steering Column Switch |
| Combi Switch Function | with indicator function, with light dimmer function, with wipe-wash function, with wipe interval function, with klaxon |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Length | 863 mm |
| Width | 52 mm |
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Outer diameter | 52 mm |
| Thickness | 100 mm |
| Driver Position | for right-hand drive vehicles |
| Cone Size | 29 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 629 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| External Thread Size | M14 x 1,5, M12 x 1,5 |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Type | Tilt Pump, driver cab |
| Function | Tilt Pump, driver cab |
| Hole Spacing | 85 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 426 mm |
| Min. Length | 372 mm |
| Pipe Diameter | 45 mm |
| Mounting points diameter | 20 mm. 32 mm |
| Piston conrod diameter | 18 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Replaces | 102018 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Function | Hydraulic Pump, steering |
| Height | 120 mm |
| Width | 126 mm |
| Length | 128 mm |
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
| Type | Hydraulic Pump, steering |
| for OE number | 002 460 52 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 785 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Internal Thread Size | M30 x 1,5 LHT |
| External Thread Size | M24 x 1,5 |
| Placement on Vehicle | Front Axle |
| Length | 925 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30.2 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 46 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Additional Information | with lock nut |
| Length | 895 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 42 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Rod/Strut | Guide Rod |
| Length | 974 mm |
| Material | Steel |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Pipe Diameter | 40 mm |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Placement on Vehicle | Front Axle |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 379 mm |
| Paired article numbers | 176304 |
| Operating Mode | Mechanical |
| Min. Length | 218 mm |
| Pipe Diameter | 42 mm. 101 mm |
| Mounting points diameter | 12 mm |
| Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Inner length 1 | 1035 mm |
| Inner length 2 | 1093 mm |
| Driver Position | for right-hand drive vehicles |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 1374 mm |
| Outer length 2 | 1287 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M33x1,5 |
| Wheel Sided Joint Diameter | 112 mm |
| Transmission-side joint diameter | 103.5 mm |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 41 |
| Min. Length | 1086 mm |
| External Teeth, Wheel Side | 35 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| External Teeth, Wheel Side | 28 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x2,0 |
| External Teeth, Diff.Side | 36 |
| Min. Length | 1053 mm |
| ABS Ring Diameter | 105 mm |
| Wheel Sided Joint Diameter | 104.7 mm |
| Transmission-side joint diameter | 91 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Placement on Vehicle | Front Axle, outer |
| Length | 980 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Brake Type | Drum Brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M18x1,5 |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 39 |
| Min. Length | 986 mm |
| Wheel Sided Joint Diameter | 90.9 mm |
| Transmission-side joint diameter | 87 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Type | Electric Motor, window regulator |
| Additional Information 2 | with bolts/screws |
| Number of Connectors / Ports | 6 |
| Placement on Vehicle | Left |
| Function | Electric Motor, window regulator |
| Paired article numbers | 179337 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Min. Length | 255 mm |
| Piston conrod diameter | 28 mm |
| Max. Length | 437 mm |
| Bore Diameter | 15 mm |
| Pipe Diameter | 58 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 90 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Shock Absorber System | Twin-Tube |
| Function | Shock Absorber |
| Shock Absorber Design | Suspension Strut |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Type | Gas Pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Function | Cable Pull, manual transmission |
| Transmission Type | 5-Speed Manual Transmission |
| Inner length 2 | 830 mm |
| Type | Cable Pull, manual transmission |
| Outer length 1 | 1183 mm |
| Inner length 1 | 850 mm |
| Outer length 2 | 1114 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.86
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 3 |
| Pump Type | Dual Pump |
| Function | Washer Fluid Pump, window cleaning |
| Type | Washer Fluid Pump, window cleaning |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.83
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Ignition Coil |
| Type | Ignition Coil |
| for OE number | 22448-6N015 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.83
Important compatibility info
| Number of Connectors / Ports | 4. 5 |
| Type | Control Unit, glow time |
| Extra Description | febi Plus |
| Function | Control Unit, glow time |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.82
Important compatibility info
| Operating Mode | Electronic |
| Extra Description | febi Plus |
| Function | Accelerator Pedal |
| Type | Accelerator Pedal |
| Number of Connectors / Ports | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.80
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.78
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 671 mm |
| Min. Length | 418 mm |
| Pipe Diameter | 76 mm. 63.4 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.71
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 316 mm |
| Thickness | 51 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.71
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 429 mm |
| Housing Diameter | 19 mm |
| Eject Force | 520 N |
| Stroke | 136 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.71
Important compatibility info
| Width | 35 mm |
| Outer diameter | 180 mm |
| Inner diameter | 35 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Additional Information 2 | with screw |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
Technical Information
Attention!: The old bolt has to be replaced with the enclosed bolt. Tightening torque specification of the vehicle manufacturer have to be obeyed.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (27215)
- 1x Febi Centering Bolt, crankshaft pulley (33619)
£90.70
Important compatibility info
| Replaces | 39475 |
| Function | Timing Chain Kit |
| Timing Chain Size | G68HRNG-1-70E |
| Number of Chain Links | 70 |
| Chain Type | Simplex, Closed chain |
| Placement on Vehicle | Lower |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (39474)
- 1x Febi Tensioner, timing chain (28717)
- 1x Febi Guide, timing chain (48770)
- 1x Febi Guide, timing chain (48773)
£90.70
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 98 009 431 80, KT210393 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.70
Important compatibility info
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| Type | Shock Absorber, driver cab suspension |
| Piston Diameter | 12 mm |
| Mounting points diameter | 14 mm |
| Min. Length | 284 mm |
| Pipe Diameter | 51 mm. 44.5 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Function | Shock Absorber, driver cab suspension |
| Max. Length | 364 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.67
Important compatibility info
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 273 mm. 210 mm |
| Thickness | 156 mm. 606 mm |
| External Thread Size | M16 x 1,5, M12 x 1,5, M18 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.64
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 345 mm |
| Thickness | 66.3 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| for OE number | 34 20 6 797 607 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.62
Important compatibility info
| Rod/Strut | Push Rod |
| Additional Information 2 | with crown nut |
| Length | 651 mm |
| Extra Description | ProKit |
| Cone Size | 30 mm |
| Placement on Vehicle | Front Axle |
| External Thread Size | M24 x 1,5 |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable on both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.60
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 11 65 7 802 595 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.59
Important compatibility info
| Number of Connectors / Ports | 14 |
| Combi Switch Function | with cruise control, with light dimmer function, with indicator function |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.58
Important compatibility info
| Placement on Vehicle | Right |
| Additional Information | with gasket/seal, with fuel sender unit |
| Number of Connectors / Ports | 6 |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.56
Important compatibility info
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Housing Type | with housing |
| Material | Plastic |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.51
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 8 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 290 mm |
| Thickness | 70 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 96 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.50
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 224 |
| Timing Chain Size | D67ZN |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.49
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front, Front Axle Left |
| Material | Aluminium |
| Additional Information 2 | with bearing, with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 180549 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.49
Important compatibility info
| Cone Size | 30 mm |
| Pipe Diameter | 36 mm |
| Function | Centre Rod Assembly |
| Placement on Vehicle | Front Axle |
| Length | 860 mm |
| Width | 62 mm |
| Thickness | 115 mm |
| Rod/Strut | Push Rod |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.49
Important compatibility info
| Inner length 1 | 1086 mm |
| Outer length 1 | 1481 mm |
| Inner length 2 | 1012 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Outer length 2 | 1330 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.46
Important compatibility info
| Width | 41.5 mm |
| Outer diameter | 55 mm |
| Function | Tensioner Pulley, timing belt |
| Additional Information 2 | with screw |
| Type | Tensioner Pulley, timing belt |
| Additional Information | with spring |
| Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, tensioner pulley (31844)
- 1x Febi Tension Spring, tensioner pulley (timing belt) (31828)
- 1x Febi Tensioner Pulley, timing belt (31310)
£90.45
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Length | 206.2 mm |
| Width | 104 mm |
| Additional Information 2 | with fastening material |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | R90 |
| Thickness/Strength 1 | 31.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.44
Important compatibility info
| Parameter | 6PK |
| Width | 36 mm |
| Material | Steel |
| Outer diameter | 169 mm |
| Inner diameter | 31 mm |
| Number of Ribs | 5 |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.39
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M22 x 1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 23 |
| Min. Length | 932 mm |
| Wheel Sided Joint Diameter | 81.4 mm |
| Transmission-side joint diameter | 80.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.37
Important compatibility info
| Placement on Vehicle | Rear |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 329 mm |
| Min. Length | 253 mm |
| Pipe Diameter | 44 mm. 53 mm |
| External Thread Size | M10 x 1 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.35
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023