Proud to be a UK-based company
Contact us
Important compatibility info
| Width | 286 mm |
| Additional Information | with gasket/seal, with oil drain plug, Oil sump with permanently integrated filter element |
| Function | Hydraulic Filter, automatic transmission |
| Extra Description | febi Plus |
| Filter type | Screen Filter |
| Additional Information 2 | with bolts/screws |
| Height | 59 mm |
| Type | Hydraulic Filter, automatic transmission |
| Length | 608 mm |
| Transmission Type | Automatic Transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.99
Important compatibility info
| Type | Cable Pull, manual transmission |
| Inner length 1 | 873 mm |
| Inner length 2 | 870 mm |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 1100 mm |
| Outer length 2 | 1167 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.99
Important compatibility info
| Additional Information 2 | with rolling bearing |
| Inner diameter | 30 mm |
| Bearing Type | Rolling Bearing |
| Hole Spacing | 138 mm |
| Type | Suspension, propshaft |
| Length | 178 mm |
| Function | Suspension, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.99
Important compatibility info
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm. 30 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Pipe Diameter | 42 mm |
| Extra Description | ProKit |
| Thread Size | M20 x 1,5, M24 x 1,5 |
| Additional Information | with nuts |
| Adjustable | Adjustable on one side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.99
Important compatibility info
| Function | Drive Shaft |
| Transmission-side joint diameter | 99 mm |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 98 mm |
| Min. Length | 755 mm |
| External Teeth, Diff.Side | 41 |
| External Teeth, Wheel Side | 31 |
| Thread Size | M24x2,0 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.99
Important compatibility info
| Placement on Vehicle | Cylinder Head, Left |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Paired article numbers | 188253 |
| Colour | Grey |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.99
Important compatibility info
| Placement on Vehicle | Cylinder Head, Right |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Paired article numbers | 188252 |
| Colour | Grey |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.99
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 1.1 kW |
| for OE number | 12 02 218 |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.99
Important compatibility info
| Material | Metal |
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, V-ribbed belt |
| Function | Belt Tensioner, V-ribbed belt |
| Width of castor bearing surface | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.99
Important compatibility info
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 610 mm |
| Core Width | 371 mm |
| Core Depth | 16 mm |
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.99
Important compatibility info
| Additional Information 2 | with dryer |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 353 mm |
| Core Width | 644 mm |
| Core Depth | 12 mm |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.99
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1275 mm |
| Inner length 2 | 1596 mm |
| Outer length 1 | 1621 mm |
| Outer length 2 | 1885 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.99
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Additional Information 2 | with bolts/screws, with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 27 |
| Number of Teeth, ABS ring | 48 |
| Min. Length | 595 mm |
| ABS Ring Diameter | 83 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 96 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.99
Important compatibility info
| Additional Information | with piston |
| Port / Connector type | - |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.98
Important compatibility info
| Number of Holes | 6 |
| Inner diameter | 59 mm |
| Additional Information | with nuts |
| Additional Information 2 | with bolts/screws, with washers |
| Outer diameter | 144 mm |
| Thickness | 30 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Replaces | 03659 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (03486)
- 6x Febi Screw (21197)
- 6x Febi Washer (19107)
- 6x Febi Nut (19104)
£78.97
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 38 mm |
| Outer diameter | 203 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 22.2 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.95
Important compatibility info
| Function | Brake Shoe Set |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Placement on Vehicle | Rear Axle |
| Piston Diameter | 19.1 mm |
| Width | 38 mm |
| Outer diameter | 203 mm |
| Type | Brake Shoe Set |
| Additional Information | with accessories, with wheel brake cylinder, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.95
Important compatibility info
| Outer diameter | 61 mm |
| Number of Connectors / Ports | 5 |
| Function | Mass Air Flow Sensor |
| Housing length | 96 mm |
| Resistor Type | Hot-wire Sensor |
| Type | Mass Air Flow Sensor |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.95
Important compatibility info
| Type | Starter |
| Rated Power | 1.1 kW |
| Function | Starter |
| Voltage | 12 V |
| Number of Teeth | 9 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.95
Important compatibility info
| Width of castor bearing surface | 29 mm |
| Material | Metal |
| Outer diameter | 80 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.95
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023