Important compatibility info
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts |
| Paired article numbers | 179807 |
| Placement on Vehicle | Left, Front Axle |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 6 |
| Function | Sensor, headlight levelling |
| Material | Plastic |
| Type | Sensor, headlight levelling |
| Voltage | 5 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 489 mm |
| Inner diameter | 458 mm |
| Number of Teeth | 161 |
| Function | Ring Gear, flywheel |
| Width | 22 mm |
| Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 29635 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | without holder |
| Additional Information 2 | with rubber mount, without ball joint |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Opening Temperature | 90 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Centering Diameter | 142.1 mm |
| Bolt Hole Circle Diameter | 180 mm |
| Inner diameter | 280 mm |
| Thickness | 131.3 mm |
| Function | Brake Drum |
| Placement on Vehicle | Rear Axle |
| Width | 75.5 mm |
| Outer diameter | 314.8 mm |
| Type | Brake Drum |
| Rim Hole Number | 6 -Hole |
| Max.skimmed drum measure | 282 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Steel |
| Type | Housing Cover, crankcase |
| Function | Housing Cover, crankcase |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 132 W |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | EGR Valve |
| Function | EGR Valve |
| Additional Information | with gaskets/seals |
| for OE number | 038 131 501 AQ |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 27947 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
| Bore Diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Outer diameter | 132 mm |
| Number of Ribs | 6 |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 28 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper Right |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Paired article numbers | 184146 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 12386 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holder |
| Replaces | 22705 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Piston Diameter | 25.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Brake Master Cylinder (46190)
- 2x Febi Nut (08565)
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 360 mm |
| Min. Length | 281 mm |
| Pipe Diameter | 45 mm. 62 mm |
| Mounting points diameter | 14 mm. 35 mm |
| Piston conrod diameter | 18 mm |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Thickness | 123 mm |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Number of Holes | 12 |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 138 mm |
| Surface | Coated |
| Function | Brake Disc |
| Internal Thread Size | M12 x 1,75 |
| Type | Brake Disc |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Oil Filter (35425)
- 1x Febi Oil Filter (27799)
- 1x Febi Fuel filter (35426)
- 1x Febi Fuel filter (35342)
Important compatibility info
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (27799)
- 2x Febi Oil Filter (35425)
- 1x Febi Fuel filter (35426)
- 1x Febi Fuel filter (35342)
- 1x Febi Seal Ring, oil drain plug (103152)
- 2x Febi Seal Ring (05552)
- 2x Febi Gasket, external planetary gearbox (08010)
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Additional Information 2 | with ball bearing |
| Inner diameter | 12 mm |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (173590)
- 1x Febi Rolling Bearing, suspension strut support mount (171299)
Important compatibility info
| Function | Brake Caliper |
| Brake caliper piston diameter | 35 mm |
| Material | Cast Iron |
| Paired article numbers | 181166 |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 75 mm |
| Outer diameter | 142 mm |
| Additional Information 2 | without wheel bearing |
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Paired article numbers | 178974 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
| Lock System | with double sealing |
| Number of Connectors / Ports | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 278 mm |
| Thickness | 68.5 mm |
| Brake Disc Thickness | 22 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter 1 | 58 mm |
| Outer diameter 2 | 133 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 54 mm |
| Outer diameter | 133.5 mm |
| Inner diameter | 35 mm |
| Number of Holes | 3 |
| Bolt Hole Circle Diameter | 112 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Right, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 107472 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter 1 | 72 mm |
| Outer diameter 2 | 161.7 mm |
| Placement on Vehicle | Front Axle |
| Width | 48 mm |
| Outer diameter | 85 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Inner diameter | 32 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided, Rear Axle Left, Rear Axle Right |
| External Teeth, Diff.Side | 29 |
| Int. teeth, diff.side, conn.to transm. | 35 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Sealing Set, air compressor |
| Function | Sealing Set, air compressor |
| for OE number | 4256 2099 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 152 |
| Timing Chain Size | G53HRF-6 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 107473 |
| Cone Size | 16 mm |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Additional Information | with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Function | Wheel Bearing Kit |
| Inner diameter | 30 mm |
| Outer diameter | 93 mm |
| Width | 55 mm |
| Placement on Vehicle | Rear Axle |
| Type | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (174134)
Important compatibility info
| Piston Diameter | 17.5 mm |
| Function | Brake Shoe Set |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Placement on Vehicle | Rear Axle |
| Width | 31 mm |
| Mounting Type | Pre-assembled |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Material | Plastic |
| Paired article numbers | 188386 |
| Type | Exterior Door Handle |
| Function | Exterior Door Handle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter 2 | 136 mm |
| Additional Information | with fastening/mounting material |
| Width | 43 mm |
| Outer diameter | 90 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring |
| Inner diameter | 30 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 64 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter 1 | 68 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 32 mm |
| Length | 387 mm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 36 mm |
| Placement on Vehicle | Front Axle, from steering gear to 1st intermediate steering lever |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 340 mm |
| Thickness | 43 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 17.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 64 mm |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Number of mounting bores | 1 |
| Rotor Style | Internally Vented |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Type | Repair Kit, brake caliper |
| Function | Repair Kit, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Outer diameter | 150 mm |
| Thickness | 43 mm |
| Number of Ribs | 5 |
| Parameter | 4PK + 3PK |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
| Additional Information | with pulse generator wheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (44420)
- 3x Febi Pulley Bolt (33757)
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 39 |
| Min. Length | 642 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 82 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control Element, parking brake caliper |
| Type | Control Element, parking brake caliper |
| Placement on Vehicle | Rear Axle Left |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 194745 |
| Number of Teeth | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control Element, parking brake caliper |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Right |
| Extra Description | febi Plus |
| Type | Control Element, parking brake caliper |
| Paired article numbers | 194744 |
| Number of Teeth | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Manufacturer | Mekra Lang |
| Placement on Vehicle | both sides |
| Length | 337 mm |
| Width | 202 mm |
| Thickness | 25 mm |
| Voltage | 24 V |
| Outer/Inner Mirror | Heatable |
| Type | Mirror Glass, exterior mirror |
| Camber Radius | 1200 mm |
| Function | Mirror Glass, exterior mirror |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 651 200 21 70 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 142 mm |
| Thickness | 72 mm |
| Inner diameter | 44 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
| Bearing Type | Tapered Roller Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Paired article numbers | 175799 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer length 1 | 1130 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Placement on Vehicle | Right |
| Inner length 1 | 835 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with mounting sleeve |
| Type | Housing, water pump |
| Function | Housing, water pump |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Outer diameter | 124 mm |
| Inner diameter | 33 mm |
| Bolt Hole Circle Diameter | 80 mm |
| Thickness | 24 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 5 |
| Surface | Coated |
| Centering Diameter | 73 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Minimum thickness | 25.9 mm |
| Brake Disc Thickness | 28 mm |
| Thickness | 71.5 mm |
| Outer diameter | 280 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































