Important compatibility info
| Number of Inlets / Outlets | 3 |
| Net weight | 0.344 kg |
| Type | Nozzle and Holder Assembly |
| Manufacturer Restriction | Bosch |
| Function | Nozzle and Holder Assembly |
| Housing Colour | black/grey |
Important compatibility info
| Number of Inlets / Outlets | 3 |
| Net weight | 0.344 kg |
| Type | Nozzle and Holder Assembly |
| Manufacturer Restriction | Bosch |
| Function | Nozzle and Holder Assembly |
| Housing Colour | black/grey |
Important compatibility info
| Fuel Type | Diesel |
| Extra Info | Mandatory - check new part against old part (in particular O E No.) |
| Type | Injector Nozzle |
| Function | Injector Nozzle |
| Part number of recommended accessories | X11-800-002-002Z, X11-800-001-002Z |
| Additional Information | with gasket/seal |
Important compatibility info
| Fuel Type | Diesel |
| Extra Info | Mandatory - check new part against old part (in particular O E No.) |
| Type | Injector Nozzle |
| Function | Injector Nozzle |
| Part number of recommended accessories | X11-800-002-002Z, X11-800-001-002Z |
| Additional Information | with gasket/seal |
Important compatibility info
Important compatibility info
| Pulleys | with V-ribbed belt pulley |
| Belt Pulley Diameter | 120 mm |
| Connector Shape | round |
| Refrigerant | R 134a |
| Compressor ID | RS18 |
| Compressor Oil | PAG 46 |
| Number of grooves | 7 |
| Type | Compressor, air conditioning |
| Manufacturer Restriction | GENUINE HALLA |
| Function | Compressor, air conditioning |
| Extra Description | GENUINE |
Important compatibility info
| Pulleys | with V-ribbed belt pulley |
| Belt Pulley Diameter | 120 mm |
| Connector Shape | round |
| Refrigerant | R 134a |
| Compressor ID | RS18 |
| Compressor Oil | PAG 46 |
| Number of grooves | 7 |
| Type | Compressor, air conditioning |
| Manufacturer Restriction | GENUINE HALLA |
| Function | Compressor, air conditioning |
| Extra Description | GENUINE |
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber System | Twin-Tube |
| Placement on Vehicle | Front Axle Left |
| Shock Absorber Mounting Type | Top pin |
| Paired article numbers | MA-AS023 |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Design | Spring-bearing Damper |
| Type | Shock Absorber |
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber System | Twin-Tube |
| Placement on Vehicle | Front Axle Left |
| Shock Absorber Mounting Type | Top pin |
| Paired article numbers | MA-AS023 |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Design | Spring-bearing Damper |
| Type | Shock Absorber |
Important compatibility info
| Type | Catalytic Converter |
| Function | Catalytic Converter |
Additional Information
Important compatibility info
| Type | Catalytic Converter |
| Function | Catalytic Converter |
Additional Information
Important compatibility info
Important compatibility info
| Charge Type | Pneumatically controlled actuator, Charger/Charge Air Cooler |
| Type | Charger, charging (supercharged/turbocharged) |
| Manufacturer Restriction | BorgWarner |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | TurboFit |
Important compatibility info
| Diameter | 240 mm |
| Number of Teeth | 23 |
| Mounting Type | not pre-mounted |
| Additional Information | with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws |
| Additional Information 2 | with clutch disc |
| Function | Clutch Kit |
| Extra Description | ZMS Modul XTend plus CSC |
| Type | Clutch Kit |
Additional Information
- 1x Sachs Flywheel (2294000113)
- 1x Sachs Clutch Kit (3000990081)
- 1x Sachs Bolt Kit, clutch (1874000002)
- 1x Sachs Bolt Kit, clutch (1874000089)
- 1x Sachs Grease (4200080060)
Important compatibility info
| Diameter | 240 mm |
| Number of Teeth | 23 |
| Mounting Type | not pre-mounted |
| Additional Information | with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws |
| Additional Information 2 | with clutch disc |
| Function | Clutch Kit |
| Extra Description | ZMS Modul XTend plus CSC |
| Type | Clutch Kit |
Additional Information
- 1x Sachs Flywheel (2294000113)
- 1x Sachs Clutch Kit (3000990081)
- 1x Sachs Bolt Kit, clutch (1874000002)
- 1x Sachs Bolt Kit, clutch (1874000089)
- 1x Sachs Grease (4200080060)
Important compatibility info
| Number of Teeth | 23 |
| Additional Information 2 | with clutch release bearing |
| Friction Lining Outer Diameter | 250 mm |
| Hub Profile | 23x26 |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Extra Description | 3-1 Kit |
Important compatibility info
| Number of Teeth | 23 |
| Additional Information 2 | with clutch release bearing |
| Friction Lining Outer Diameter | 250 mm |
| Hub Profile | 23x26 |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Extra Description | 3-1 Kit |
Important compatibility info
| Guarantee | 2 years guarantee |
| Product met | Euro 5 |
| Includes fitting kit | FK92050B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| To be used with part number(s) | FK92050 |
| Type | Catalytic Converter |
| Inspection Tag | E57-103R |
| Material | Ceramic |
Important compatibility info
| Guarantee | 2 years guarantee |
| Product met | Euro 5 |
| Includes fitting kit | FK92050B |
| Extra Description | Approved |
| Function | Catalytic Converter |
| To be used with part number(s) | FK92050 |
| Type | Catalytic Converter |
| Inspection Tag | E57-103R |
| Material | Ceramic |
Important compatibility info
| Net weight | 1.206 kg |
| Function | Fuel Feed Unit |
| Plug Type | Female |
| Housing Colour | White |
| Number of Inlets / Outlets | 1 |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
| Additional Information | with fuel sender unit |
| Weight | 1.636 kg |
| Diameter | 138 mm |
| Type | Fuel Feed Unit |
Important compatibility info
| Net weight | 1.206 kg |
| Function | Fuel Feed Unit |
| Plug Type | Female |
| Housing Colour | White |
| Number of Inlets / Outlets | 1 |
| Operating Mode | Electric |
| Number of Poles | 5 -pin connector |
| Additional Information | with fuel sender unit |
| Weight | 1.636 kg |
| Diameter | 138 mm |
| Type | Fuel Feed Unit |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 56.7 mm |
| Outer diameter | 400 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 38 mm |
| Number of Holes | 5 |
| Minimum thickness | 36 mm |
| Centering Diameter | 85 mm |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | PRIME LINE |
| Rotor Style | perforated/vented |
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 56.7 mm |
| Outer diameter | 400 mm |
| Additional Information 2 | with bolts/screws |
| Brake Disc Thickness | 38 mm |
| Number of Holes | 5 |
| Minimum thickness | 36 mm |
| Centering Diameter | 85 mm |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Extra Description | PRIME LINE |
| Rotor Style | perforated/vented |
Important compatibility info
| Extra Description | TYC |
| Function | Headlight |
| Manufacturer Restriction | Hella |
| Type | Headlight |
| Bulb Type | H7/H7 |
| Vehicle Equipment | for vehicles with headlight levelling |
| Paired article numbers | BM1234904 |
| Additional Information 2 | with motor for headlamp levelling |
| Placement on Vehicle | Right |
Important compatibility info
| Extra Description | TYC |
| Function | Headlight |
| Manufacturer Restriction | Hella |
| Type | Headlight |
| Bulb Type | H7/H7 |
| Vehicle Equipment | for vehicles with headlight levelling |
| Paired article numbers | BM1234904 |
| Additional Information 2 | with motor for headlamp levelling |
| Placement on Vehicle | Right |
Important compatibility info
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Includes fitting kit | FK92054B |
| Product met | Euro 5 |
| To be used with part number(s) | FK92054 |
| Inspection Tag | E57-103R |
| Placement on Vehicle | Front |
| Material | Ceramic |
Important compatibility info
| Type | Catalytic Converter |
| Guarantee | 2 years guarantee |
| Function | Catalytic Converter |
| Extra Description | Approved |
| Includes fitting kit | FK92054B |
| Product met | Euro 5 |
| To be used with part number(s) | FK92054 |
| Inspection Tag | E57-103R |
| Placement on Vehicle | Front |
| Material | Ceramic |
Important compatibility info
| Engine Version | for engines with dual-mass flywheel |
| Additional Information 2 | with screw set |
| Outer diameter | 240 mm |
| Replaces | QDF185 |
| Function | Flywheel |
| Type | Flywheel |
Important compatibility info
| Engine Version | for engines with dual-mass flywheel |
| Additional Information 2 | with screw set |
| Outer diameter | 240 mm |
| Replaces | QDF185 |
| Function | Flywheel |
| Type | Flywheel |
Important compatibility info
| Type | Silencer Insert, rear muffler |
| Function | Silencer Insert, rear muffler |
Important compatibility info
| Extra Description | LuK RepSet DMF |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Adjustment | with automatic adjustment |
| Number of mounting bores | 8 |
| Additional Information 2 | with clutch release bearing, with flywheel, with screw set |
Additional Information
- 1x LuK Screw Set, flywheel (411012010)
- 1x LuK Flywheel (415018010)
- 1x LuK Clutch Kit (625302200)
Important compatibility info
| Extra Description | LuK RepSet DMF |
| Type | Clutch Kit |
| Function | Clutch Kit |
| Adjustment | with automatic adjustment |
| Number of mounting bores | 8 |
| Additional Information 2 | with clutch release bearing, with flywheel, with screw set |
Additional Information
- 1x LuK Screw Set, flywheel (411012010)
- 1x LuK Flywheel (415018010)
- 1x LuK Clutch Kit (625302200)
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Weight | 10 kg |
| not for equipment variant | ADS |
| Length | 74 cm |
| Type | Shock Absorber |
| Height | 20 cm |
| Width | 20 cm |
| Function | Shock Absorber |
| Extra Description | Dunlop Original spare part |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Weight | 10 kg |
| not for equipment variant | ADS |
| Length | 74 cm |
| Type | Shock Absorber |
| Height | 20 cm |
| Width | 20 cm |
| Function | Shock Absorber |
| Extra Description | Dunlop Original spare part |
Important compatibility info
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
| Heating / Cooling | Single Fan |
| Additional Information 2 | with radiator fan shroud |
Important compatibility info
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
| Heating / Cooling | Single Fan |
| Additional Information 2 | with radiator fan shroud |
Important compatibility info
| Pitch circle diameter, clutch pressure plate | 410 mm |
| Hub fastening hole diameter | 16 mm |
| Hub internal diameter | 52 mm |
| Number of clutch pressure plate fastening holes | 12 |
| External diameter, clutch pressure plate | 395 mm |
| Number of EDC bores/notches | 58 |
| Number of hub fastening holes | 8 |
| Pitch circle diameter, hub | 84 mm |
| Function | Flywheel |
| Type | Flywheel |
| Number of Teeth | 146 |
| Additional Information | with starter motor sprocket |
| Running surface internal diameter | 236 mm |
| Hub external diameter | 115 mm |
| for OE number | 936 030 51 05 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pitch circle diameter, clutch pressure plate | 410 mm |
| Hub fastening hole diameter | 16 mm |
| Hub internal diameter | 52 mm |
| Number of clutch pressure plate fastening holes | 12 |
| External diameter, clutch pressure plate | 395 mm |
| Number of EDC bores/notches | 58 |
| Number of hub fastening holes | 8 |
| Pitch circle diameter, hub | 84 mm |
| Function | Flywheel |
| Type | Flywheel |
| Number of Teeth | 146 |
| Additional Information | with starter motor sprocket |
| Running surface internal diameter | 236 mm |
| Hub external diameter | 115 mm |
| for OE number | 936 030 51 05 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Weight | 0.962 kg |
| Net weight | 0.842 kg |
| Function | High-pressure Pump |
| Plug Type | Female |
| Housing Colour | Black |
| Number of Inlets / Outlets | 3 |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Type | High-pressure Pump |
Important compatibility info
| Weight | 0.962 kg |
| Net weight | 0.842 kg |
| Function | High-pressure Pump |
| Plug Type | Female |
| Housing Colour | Black |
| Number of Inlets / Outlets | 3 |
| Operating Mode | Electric |
| Number of Poles | 2 -pin connector |
| Type | High-pressure Pump |
Important compatibility info
| Voltage | 14 V |
| Number of Ribs | 8 |
| Pulleys | with multi-belt pulley |
| Alternator Charge Current | 210 A |
| Belt Pulley Diameter | 51 mm |
| Quality | OE |
| Vehicle Main Current | for vehicles with 12V main current |
| Type | Alternator |
| Function | Alternator |
| Gross Weight | 7810 g |
Important compatibility info
| Voltage | 14 V |
| Number of Ribs | 8 |
| Pulleys | with multi-belt pulley |
| Alternator Charge Current | 210 A |
| Belt Pulley Diameter | 51 mm |
| Quality | OE |
| Vehicle Main Current | for vehicles with 12V main current |
| Type | Alternator |
| Function | Alternator |
| Gross Weight | 7810 g |
Important compatibility info
| Alternator Charge Current | 90 A |
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 62 mm |
| Function | Alternator |
| Number of Ribs | 6 |
| Type | Alternator |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Alternator Charge Current | 90 A |
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 62 mm |
| Function | Alternator |
| Number of Ribs | 6 |
| Type | Alternator |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with pilot bearing |
| Number of mounting bores | 8 |
| Function | Flywheel |
| Transmission Type | Manual Transmission |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Additional Information | with pilot bearing |
| Number of mounting bores | 8 |
| Function | Flywheel |
| Transmission Type | Manual Transmission |
| Extra Description | LuK DMF |
| Type | Flywheel |
Important compatibility info
| Weight | 3424 g |
| Placement on Vehicle | Right |
| Material | Aluminium |
| Core Dimensions | 245x251x80 |
| for OE number | 4H0145805H |
| Frame Material | Plastic |
| Type | Charge Air Cooler |
| Function | Charge Air Cooler |
| Core Length | 245 mm |
| Core Width | 251 mm |
| Core Depth | 80 mm |
| Gross Weight | 4450 g |
| alternative item | - |
Important compatibility info
| Weight | 3424 g |
| Placement on Vehicle | Right |
| Material | Aluminium |
| Core Dimensions | 245x251x80 |
| for OE number | 4H0145805H |
| Frame Material | Plastic |
| Type | Charge Air Cooler |
| Function | Charge Air Cooler |
| Core Length | 245 mm |
| Core Width | 251 mm |
| Core Depth | 80 mm |
| Gross Weight | 4450 g |
| alternative item | - |
Important compatibility info
| Injection System | Common Rail |
| Manufacturer Restriction | DENSO |
| Fuel Type | Diesel |
| for OE number | 1465A041 |
| Type | Injector |
| Function | Injector |
| Packaging height | 43 cm |
| Packaging length | 56.6 cm |
| Packaging width | 15.1 cm |
| Gross Weight | 0.78 kg |
Important compatibility info
| Injection System | Common Rail |
| Manufacturer Restriction | DENSO |
| Fuel Type | Diesel |
| for OE number | 1465A041 |
| Type | Injector |
| Function | Injector |
| Packaging height | 43 cm |
| Packaging length | 56.6 cm |
| Packaging width | 15.1 cm |
| Gross Weight | 0.78 kg |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023























