Electrical >

Battery Chargers

Sort by:

Price +/-

Brand

Brand:

Select Brand

invoice Page 4 of 4

Results 91 - 96 of 96

CTEK 40-315 D250SE 20A DC/DC Battery Charger -

Part number: 40-315

Important compatibility info

Charging Voltage	12 V
Height	65 mm
Width	110 mm
12V Charge Capacity (up to)	40 Ah - 300 Ah
Charge Rate	20 A
Length	192 mm
Trickle Charge	40 Ah - 300 Ah

CTEK 40-315 D250SE 20A DC/DC Battery Charger -

ONLY
£311.23

CTEK 40-289 Smartpass 120S Power Management System 12V 120A -

Part number: 40-289

Important compatibility info

Charging Voltage	12 V
Charge Rate	120 A

CTEK 40-289 Smartpass 120S Power Management System 12V 120A -

ONLY
£315.23

CTEK 56-768 MXT14 - 24 Volt 14A Pro Battery Charger MXT 14 MULTI XT 14000 -

Part number: 56-768

Important compatibility info

Charging Voltage	24 V
Trickle Charge	28 Ah - 500 Ah
24V Charge Capacity (up to)	28 Ah - 300 Ah
Charge Rate	14 A

CTEK 56-768 MXT14 - 24 Volt 14A Pro Battery Charger MXT 14 MULTI XT 14000 -

ONLY
£320.92

CTEK 56-740 D250TS 24V 10A DC/DC Smart Charger -

Part number: 56-740

Important compatibility info

Charge Rate	10 A
Charging Voltage	24 V

CTEK 56-740 D250TS 24V 10A DC/DC Smart Charger -

ONLY
£375.25

Noco Pro Battery Charger 50a GENIUSPRO50

Part number: GENIUSPRO50

About NOCO

In 1914 in Cleveland, Ohio, Joseph Henry Nook, a local tire and battery distributor, set out to develop a product that would prevent battery corrosion. After several hundred different formulations, Mr. Nook began commercially manufacturing and distributing the world's first Battery Corrosion Preventative which he called NCP2. NCP2 is an acronym for "No Corrosion Product" which is applied in "2 Steps". The NCP2 brand quickly became a household name in every major battery and automotive shop. For over 100 years, the NCP2 brand has been preventing battery corrosion on over a billion vehicles and applications worldwide.

Important compatibility info

Length	312 mm
Height	91 mm
Width	175 mm
Charging Voltage	12/24 V
Trickle Charge	Maintains
Title	Professional 50a Workshop Charger
Charge Rate	50 A
12V Charge Capacity (up to)	1 Ah - 1000 Ah
Lithium Charge Capacity (up to)	1 Ah - 1000 Ah
6V Charge Capacity (up to)	1 Ah - 1000 Ah
24V Charge Capacity (up to)	1 Ah - 1000 Ah
Tool Type	Battery Chargers

Additional Information

Introducing the all-new GENIUSPRO50, a 6-volt,12-volt, and 24-volt fully-automatic professional smart charger, maintainer, power supply, and battery-desulfator with temperature compensation rated at 50-amps for all types of automotive, marine, and deep-cycle batteries.

A multi-voltage charger - 6-volt (50-amps), 12-volt (50-amps), and 24-volt (25-amps) - for lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion.

Designed for pros who need absolute performance and uncompromising functionality. Featuring ultra-flexible silicone cabling - down to -40ºC - with protective nylon breaded shielding for maximum protection against abrasion.

A dual-voltage power supply - 12-volt (50-amp) and 24-volt (25-amp) - to maintain constant power delivery without unwanted ripple, noise, and transient spikes during ECU flashing, reprogramming, and diagnostic testing.

An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates to maximize battery life and enable fast charging.

Detects batteries as low as 1-volt. Or use the all-new force mode that allows you to manually begin charging dead batteries down to zero volts.

Automatically detects battery sulfation and acid stratification to restore lost battery performance for stronger engine starts and extended battery life. Plus, cutting-edge battery repair modes for 6-volt, 12-volt, and 24-volt batteries.

CE/UKCA

Noco Pro Battery Charger 50a GENIUSPRO50

ONLY
£866.35

Topdon T120A5M T120A BATTERY CHARGER(5M CLAMP?

Part number: T120A5M

About Topdon

Founded in 2017 TOPDON quickly gathered a group of automotive experts, DIY gearheads, and trained technicians to provide users with premium services.

Important compatibility info

Title	Tornado120000A5M
Tool Type	Battery Support Units
Dimensions	H 7cm x L 41cm x W 38cm
Height	7cm
Length	41cm
Material	plastic
Pack Qty	1 1
Product Approvals	CE Compliant
Temperature Range	-10C to 40C
Volts	90-240VAC, 50-60Hz
Weight	14.5Kg
Width	38cm

Additional Information

Meet the TOPDON Tornado120000–a professional smart programming power supply designed to provide efficient charging and voltage stabilization for vehicles equipped with 12V batteries. It features intelligent current (5-120A) and voltage (11-16.8V) output adjustment and boasts a maximum power of 1700W to confidently handle every battery. With 3 major charging modes and 9-step smart charging, it seamlessly balances charging speed and quality. The dot matrix LCD screen ensures easy operation, while 8 built-in safety protection modes provide peace of mind with features like reverse connection protection, short circuit protection, and spark protection. Compatible with both 12V lead-acid batteries and lithium batteries, the T120A serves as your all-in-one charging solution for battery charging, automotive repair, and programming needs.

120A Stable Power

BMW & Benz Ready

Custom Charge Mode

12V Dual Battery

9-Step Charging

Smart Battery Care

Adjustable Output

Lab Test Ready

8 Safety Layers

Spark-Free Safe

Multi-Device Use

Fast & Flexible

5m Output cable

1.Input Voltage: 90-240Vac 2.Output Voltage: 11-16.8V 5-120A(adjustable), up to 1700W 3.Charging Mode: Supply, Lead-Acid, LiFePO4, Custom, NORM, AGM

Negative AWG4#, 2.2m or 5m

Safety Protection: Over-temperature protection, input low voltage protection, overload protection, bad battery protection, short circuit protection, overvoltage protection, reverse connection protection, host abnormality protection.