Engine Oils
Important compatibility info
| Type | Synthetic Engine Oil |
| Function | Engine Oil |
| Oil Viscosity Classification SAE | 0W-20 |
| Capacity | 1 Litre |
| Oil Specification | Volvo VCC RBS0-2AE |
| Volume | 1 L |
| SAE Viscosity | 0W20 |
| ACEA specification | C5 |
| Grade | Multigrade |
| Key Words | Edge; Synthetic |
Additional Information
Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.
Castrol EDGE Professional is micro-filtered and certified CO2 Neutral according to the highest global standard*. Its patented Fluid TITANIUM transforms to be stronger under pressure and reduces friction for maximum engine performance when you need it most. Castrol EDGE Professional with Fluid TITANIUM: unlock the true performance of your engine.
* in accordance with the BSI PAS 2060 specification
Application
Castrol EDGE Professional V 0W-20 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends and ACEA C5 0W-20 lubricant. Castrol EDGE Professional V 0W-20 is approved for use in vehicles that require a Volvo VCC RBS0-2AE specification 0W-20 lubricant. Please refer to your owners handbook.
Advantages
Castrol EDGE Professional V 0W-20 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's sophisticated vehicles requiring a high level of protection and higher performance oils.
- Transforms to be strongest when the pressure is highest, protecting your engine
- Reduces power-robbing friction across engine speeds and conditions Independently tested at the highest standards for proven performance
- Recommended by world-leading car manufacturers
- Protects the engine for the entire drain interval even under extreme pressure
- Delivers high levels of fuel efficiency and low temperature performance
Product Performance Claims
- ACEA C5
- Volvo VCC RBS0-2AE
Important compatibility info
| Title | CASTROL MAGNATEC 5W-30 C2 - 1L |
| Specification | ACEA Light Duty C2 |
| Extra Description | Castrol Magnatec 5W-30 C2 |
| Packing Type | Bottle |
| Manufacturer Release | PSA B71 2290, FIAT 9.55535-S1 |
| Oil | Synthetic Oil |
| SAE Viscosity | 5W-30 |
| Capacity | 1 l |
| Type | Engine Oil |
| Function | Engine Oil |
| Oil Specification | PSA B71 2290 |
| Volume | 1 L |
| ACEA specification | C2 |
| Grade | Multigrade |
| Key Words | Magnatec; Synthetic |
Additional Information
Technical Information
Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic
Up to 75% of engine wear happens while your engine warms up. When the engine stops, oil drains off critical engine parts, however Castrol MAGNATEC's Intelligent Molecules don't. They cling to the engine like a magnet, providing an extra layer of protection. Castrol MAGNATEC's formulation protects from the moment you start, dramatically reducing engine wear*. Castrol MAGNATEC. Instant Protection From The Moment You Start.
*As tested in the industry Sequence IVA wear test.
Application
Castrol MAGNATEC 5W-30 C2 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C2 5W-30 lubricant.
Castrol MAGNATEC 5W-30 C2 is approved for use in Peugeot Citroen vehicles that require a PSA Approval B71 2290 5W-30 lubricant.
Advantages
Castrol MAGNATEC's Intelligent Molecules:
- Cling to engine parts when the oil drains down
- Adsorbs to metal surfaces to make engine parts more resistant to wear
- Are combined with synthetic technology to provide increased protection in high and low temperature applications
- Provide continuous protection for different driving conditions, styles and temperatures
Product Performance Claims
- ACEA C2
- PSA Approval B71 2290
- Provide continuous protection for different driving conditions, styles and temperatures
- combined with synthetic technology to provide increased protection in high and low temperature applications
- Adsorbs to metal surfaces to make engine parts more resistant to wear
- Cling to engine parts when the oil drains down
- Castrol MAGNATEC: Non-stop protection from every start.
- ACEA C2
- PSA Approval B71 2290
Important compatibility info
| Manufacturer Release | FIAT 9.55535-DS1, FIAT 9.55535-GS1, PSA B71 2302, PSA B71 2312 |
| Oil | Synthetic Oil |
| Packing Type | Bottle |
| Capacity | 1 l |
| Extra Description | Castrol Magnatec 0W-30 C2 |
| Function | Engine Oil |
| SAE Viscosity | 0W-30 |
| Specification | ACEA Light Duty C2 |
| Type | Engine Oil |
| Volume | 1 L |
| ACEA specification | C2 |
| Grade | Multigrade |
| Key Words | Magnatec; Synthetic |
| Title | Castrol Magnatec 0W-30 C2 - 1L |
Additional Information
Technical Information
Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic
- Castrol MAGNATEC 0W-30 C2 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C2, 0W-30 lubricant.
- Castrol MAGNATEC clings like a magnet to critical engine parts and locks in place to deliver 50% better engine wear protection*. Helping to safeguard your engine’s vital components - the valvetrain, timing chain, pistons, and bearings - from damage and wear.
- Forms a resistive barrier between metal contact points in the valvetrain
- Manages abrasive piston deposits, guarding against cylinder liner wear
- Maintains timing chain tension and engine synchronicity by minimising chain damage and elongation
- reserves engine bearings from corrosive wear
- Product Performance Claims: ACEA C2
- PSA Approval B71 2302, PSA Approval B71 2312
- Meets Fiat 9.55535-DS1/ GS1
Important compatibility info
| Manufacturer Release | FIAT 9.55535-DS1, FIAT 9.55535-GS1, PSA B71 2302, PSA B71 2312 |
| Packing Type | Bottle |
| Title | CASTROL MAGNATEC 0W-30 C2 - 4L |
| Extra Description | Castrol Magnatec 0W-30 C2 |
| Function | Engine Oil |
| Type | Engine Oil |
| Capacity | 4 l |
| Oil | Synthetic Oil |
| SAE Viscosity | 0W-30 |
| Specification | ACEA Light Duty C2 |
| Oil Specification | PSA B71 2312 |
| Volume | 4 L |
| ACEA specification | C2 |
| Grade | Multigrade |
| Key Words | Magnatec; Synthetic |
Additional Information
Technical Information
Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic
Up to 75% of engine wear happens while your engine warms up. When the engine stops, oils drain off critical engine parts, however Castrol MAGNATEC's Intelligent Molecules don't. They cling to the engine like a magnet providing an extra layer of protection.
Castrol MAGNATEC's formulation protects from the moment you start, dramatically reducing engine wear*.
Castrol MAGNATEC. Instant Protection From The Moment You Start.
*As tested in the industry Sequence IVA wear test.
Application
Castrol MAGNATEC 0W-30 C2 is suitable for use in automotive gasoline and vehicles where the manufacturer recommends an ACEA C2 specification lubricant.
Advantages
Castrol MAGNATEC's Intelligent Molecules:
- Cling to engine parts when the oil drains down
- Adsorbs to metal surfaces to make engine parts more resistant to wear
- Are combined with synthetic technology to provide increased protection in high and low temperature applications
- Provide continuous protection for different driving conditions, styles and temperatures
Product Performance Claims
- ACEA C2
- PSA Approval B71 2312
- Provide continuous protection for different driving conditions, styles and temperatures
- combined with synthetic technology to provide increased protection in high and low temperature applications
- Adsorbs to metal surfaces to make engine parts more resistant to wear
- Cling to engine parts when the oil drains down
- Castrol MAGNATEC’s formulation protects from the moment you start, dramatically reducing engine wear
- ACEA C2
- PSA Approval B71 2312
Important compatibility info
| SAE Viscosity | 0W-30 |
| Extra Description | Castrol Magnatec 0W-30 C2 |
| Function | Engine Oil |
| Type | Engine Oil |
| Oil | Synthetic Oil |
| Manufacturer Release | FIAT 9.55535-DS1, FIAT 9.55535-GS1, PSA B71 2302, PSA B71 2312 |
| Packing Type | Bottle |
| Capacity | 5 l |
| Specification | ACEA Light Duty C2 |
Additional Information
Technical Information
Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

