Engine Oils

• Low Speed pre-ignition protection incorporated
• Valvoline Hybrid C-Series engine oils can also be used in non-hybrid engines that require an ACEA: C5, API: SP and API: SN engine oil in the SAE 0W-20 viscosity grade
• Enhanced oxidation stability to ensure engine durability in the most severe stop-start cycles
• Excellent water tolerance and separation capability to prevent sludge forming
• Enhanced soot control to prevent premature oil degradation
• Enhanced oxidation stability to ensure engine durability in the most adverse stop-start situations. Improved oil flow and fast response at low temperature to prevent wear during the most severe stop-start conditions
• Enhanced anti-wear additives to ensure a longer engine life and maintain vehicle efficiency.
• Valvoline Hybrid C-series engine oils are formulated with specially selected additives and antioxidants to ensure an increased level of protection in terms of oxidation, corrosion and wear especially for the hybrid vehicle challenges when compared to conv

• Meets: ACEA: C5
• API: SN, SP

• Protects GDI (Gasoline Direct Injection) engine from Low-Speed Pre-Ignitions (LSPI)
• Provides ultimate protection against wear under all operating conditions
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption
• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Keeps engine extremely clean by minimizing deposits
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and GPF (Gasoline Particulate Filter)
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions Designed to fulfill the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: GM dexos1 Gen 2 D10834IE103
• Meets: API: SP, SN Plus RC (Resource Conserving)
• Ford WSS-M2C962-1A
• ILSAC GF-6, GF-6

• Contains a unique chemical marker to guarantee authenticity
• Zero compromise in engine protection
• Excellent fuel efficiency
• Ensures consistent lubricant performance over extended drain intervals

• ACEA C5, API SN Plus | VW 508.00 / 509.00 (TL 52577), PORSCHE C20
• VW 508.00 / 509.00 (TL 52577), PORSCHE C20

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 0W-20 LL IV is suitable for use in gasoline and diesel engines where the manufacturer recommends an ACEA C5 0W-20 lubricant. Castrol EDGE 0W-20 LL IV is approved for use in gasoline and diesel engines in vehicles from the VW Group that require a VW 508 00 / 509 00 specification 0W-20 lubricant. Castrol EDGE 0W-20 LL IV is approved for use in vehicles that require a Porsche C20 specification 0W-20 lubricant.

Advantages

Castrol EDGE 0W-20 LL IV with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

Castrol EDGE 0W-20 LL IV:

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA C5
• Porsche C20
• VW 508 00/ 509 00
• Meets - Ford WSS-M2C956-A1

• Castrol EDGE 0W-20 LL IV is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C5, C6 0W-20 lubricant.
• Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers, whilst engine technology adapts to meet the demanding legislative limits.
• With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Demonstrates improved performance as a result of better fuel economy
• Delivers more horsepower and greater acceleration
• Stronger under pressure in today’s modern engines

• ACEA C5, C6
• BMW Longlife-17FE+
• MB-Approval 229.71/ 229.72
• Porsche C20
• VW 508 00/ 509 00
• Meets Ford WSS-M2C956-A1

Carlube Triple R 0W-20 R-Tec 6 is a trustworthy, reliable and robust engine oil that provides strong corrosion and wear protection to key components in an engine, maintaining a clean and high-performing engine for trouble-free driving.

Triple R 0W-20 R-Tec 6 is suitable for the latest direct engine gasoline engines in preventing low-speed pre-ignition and has proven real-world performance in conventional and hybrid vehicles. They provide exceptional fuel economy particularly in 0W-16 as well as 0W-20 vehicles.
They are recommended by hybrid vehicle manufacturers because of their strong corrosion control, sludge control and excellent water tolerance.

• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Keeps engine extremely clean by minimizing deposits. Provides ultimate protection against wear under all operating conditions
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: BMW LL-12 FE Meets: ACEA C2

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine

Castrol EDGE 0W-30 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends API SP, ACEA C3 0W-30 lubricant. Please refer to your owners handbook.

Castrol EDGE W-30 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Specification

• ACEA C3
• API SP
• BMW Longlife-04
• BMW Longlife-19FE
• MB-Approval 226.5/ 229.31/ 229.51
• Opel OV 040 1547 - D30
• Opel OV 040 1547 - G30
• Renault RN 0700 / RN 0710

• Castrol EDGE 0W-30 delivers against HYSPEC, Castrol’s new hybrid performance standard**
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance.

• ACEA C3, API SP
• BMW Longlife-04, BMW Longlife-19FE
• MB-Approval 226.5/ 229.31/ 229.51
• Opel OV 040 1547 - D30, Opel OV 040 1547 - G30, Renault RN 0700 / RN 0710

Technical Information

Engine oils: Motorcycle Motorcycle 4T eng oil -- Part Synthetic

Castrol POWER1 4T is an advanced, premium quality, part-synthetic engine oil developed for the latest generation 4-stroke motorcycle engines. It is designed specifically for bikers who love the exhilaration of riding. Up to 30% of power is lost due to friction without you knowing it. Castrol POWER1 4T with Power Release TechnologyTM boosts the performance of your bike by optimising friction and enables you to accelerate faster.

Application

Castrol POWER1 4T is designed to optimise performance for motorcycle engines. It is suitable for all makes of 4-stroke bikes, both carburetor or fuel injected where API SN (or below) and JASO MA or MA2 are recommended.

Advantages

• Tested and proven to deliver superior acceleration at the twist of the throttle
• Power Release TechnologyTM optimises friction in the clutch and reduces internal engine losses due to friction
• Complies with requirements of catalyst equipped engines

Product Performance Claims

• API SL
• JASO MA2

• Its Power Release Formula is specially designed to enable your bike to deliver maximum and sustained power right up to very high operating rpm thus offering a significant advantage over other motorcycle engine oils.
• Castrol Power1 4T reduces internal losses in the engine, whilst retaining optimum wet clutch performance to ensure efficient transfer of power to the rear wheel.
• Tested and proven to deliver improved acceleration at the touch of the throttle
• Castrol Power1 4T - engineered for performance

• API SN
• JASO MA2

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

• Suitable for use in hybrid cars
• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance.

• ACEA A1/B1, A5/B5, API SL/CF
• Volvo 95200377

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 0W-40 A3/B4 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA A3/B4, API SP or earlier specifcation 0W-40 lubricant. Please refer to the product performance section and your owners handbook

Advantages

Castrol EDGE 0W-40 A3/B4 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA A3/B4
• API SP
• BMW Longlife-01
• MB-Approval 229.3/ 229.5
• VW 502 00 / 505 00
• Renault RN 0700 / RN 0710
• Meets - Ford WSS-M2C937-A

• Suitable for use in hybrid cars
• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance.

• ACEA A3/B4, API SP
• BMW Longlife-01, MB-Approval 229.5, Porsche A40, Renault RN0700 / RN0710, VW 502 00/ 505 00
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.3