Engine Oils

• Low Speed pre-ignition protection incorporated
• Valvoline Hybrid C-Series engine oils can also be used in non-hybrid engines that require an ACEA: C5, API: SP and API: SN engine oil in the SAE 0W-20 viscosity grade
• Enhanced oxidation stability to ensure engine durability in the most severe stop-start cycles
• Excellent water tolerance and separation capability to prevent sludge forming
• Enhanced soot control to prevent premature oil degradation
• Enhanced oxidation stability to ensure engine durability in the most adverse stop-start situations. Improved oil flow and fast response at low temperature to prevent wear during the most severe stop-start conditions
• Enhanced anti-wear additives to ensure a longer engine life and maintain vehicle efficiency.
• Valvoline Hybrid C-series engine oils are formulated with specially selected additives and antioxidants to ensure an increased level of protection in terms of oxidation, corrosion and wear especially for the hybrid vehicle challenges when compared to conv

• Meets: ACEA: C5
• API: SN, SP

• Protects GDI (Gasoline Direct Injection) engine from Low-Speed Pre-Ignitions (LSPI)
• Provides ultimate protection against wear under all operating conditions
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption
• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Keeps engine extremely clean by minimizing deposits
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and GPF (Gasoline Particulate Filter)
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions Designed to fulfill the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: GM dexos1 Gen 2 D10834IE103
• Meets: API: SP, SN Plus RC (Resource Conserving)
• Ford WSS-M2C962-1A
• ILSAC GF-6, GF-6

• Contains a unique chemical marker to guarantee authenticity
• Zero compromise in engine protection
• Excellent fuel efficiency
• Ensures consistent lubricant performance over extended drain intervals

• ACEA C5, API SN Plus | VW 508.00 / 509.00 (TL 52577), PORSCHE C20
• VW 508.00 / 509.00 (TL 52577), PORSCHE C20

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 0W-20 LL IV is suitable for use in gasoline and diesel engines where the manufacturer recommends an ACEA C5 0W-20 lubricant. Castrol EDGE 0W-20 LL IV is approved for use in gasoline and diesel engines in vehicles from the VW Group that require a VW 508 00 / 509 00 specification 0W-20 lubricant. Castrol EDGE 0W-20 LL IV is approved for use in vehicles that require a Porsche C20 specification 0W-20 lubricant.

Advantages

Castrol EDGE 0W-20 LL IV with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

Castrol EDGE 0W-20 LL IV:

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA C5
• Porsche C20
• VW 508 00/ 509 00
• Meets - Ford WSS-M2C956-A1

• Castrol EDGE 0W-20 LL IV is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C5, C6 0W-20 lubricant.
• Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers, whilst engine technology adapts to meet the demanding legislative limits.
• With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Demonstrates improved performance as a result of better fuel economy
• Delivers more horsepower and greater acceleration
• Stronger under pressure in today’s modern engines

• ACEA C5, C6
• BMW Longlife-17FE+
• MB-Approval 229.71/ 229.72
• Porsche C20
• VW 508 00/ 509 00
• Meets Ford WSS-M2C956-A1

Carlube Triple R 0W-20 R-Tec 6 is a trustworthy, reliable and robust engine oil that provides strong corrosion and wear protection to key components in an engine, maintaining a clean and high-performing engine for trouble-free driving.

Triple R 0W-20 R-Tec 6 is suitable for the latest direct engine gasoline engines in preventing low-speed pre-ignition and has proven real-world performance in conventional and hybrid vehicles. They provide exceptional fuel economy particularly in 0W-16 as well as 0W-20 vehicles.
They are recommended by hybrid vehicle manufacturers because of their strong corrosion control, sludge control and excellent water tolerance.

• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Keeps engine extremely clean by minimizing deposits. Provides ultimate protection against wear under all operating conditions
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: BMW LL-12 FE Meets: ACEA C2

• Very high standards of engine cleanliness
• Fully synthetic, long drain formulation
• Compatibility with after treatment systems
• Fuel saving technology

• ACEA C2
• BMW LONGLIFE-12 FE

Carlube Triple R 0W-30 R-Tec 9 has advanced additive technology that provides powerful detergency and the ability to prevent the build-up of piston deposits, allowing the lubricant to meet the stringent demands and exacting requirements of the VW 504.00/507.00 specification.

This engine oil is designed to lubricate high power modern based engines.
The formulation maintains a good lubricant flow throughout the engine enhancing the lubrication of all engine parts whilst also preventing wear. Provides excellent engine durability as well as giving fuel economy benefits

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine

Castrol EDGE 0W-30 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends API SP, ACEA C3 0W-30 lubricant. Please refer to your owners handbook.

Castrol EDGE W-30 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Specification

• ACEA C3
• API SP
• BMW Longlife-04
• BMW Longlife-19FE
• MB-Approval 226.5/ 229.31/ 229.51
• Opel OV 040 1547 - D30
• Opel OV 040 1547 - G30
• Renault RN 0700 / RN 0710

• Castrol EDGE 0W-30 delivers against HYSPEC, Castrol’s new hybrid performance standard**
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance.

• ACEA C3, API SP
• BMW Longlife-04, BMW Longlife-19FE
• MB-Approval 226.5/ 229.31/ 229.51
• Opel OV 040 1547 - D30, Opel OV 040 1547 - G30, Renault RN 0700 / RN 0710

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

• Suitable for use in hybrid cars
• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance.

• ACEA A1/B1, A5/B5, API SL/CF
• Volvo 95200377

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 0W-40 A3/B4 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA A3/B4, API SP or earlier specifcation 0W-40 lubricant. Please refer to the product performance section and your owners handbook

Advantages

Castrol EDGE 0W-40 A3/B4 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA A3/B4
• API SP
• BMW Longlife-01
• MB-Approval 229.3/ 229.5
• VW 502 00 / 505 00
• Renault RN 0700 / RN 0710
• Meets - Ford WSS-M2C937-A

• Suitable for use in hybrid cars
• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance.

• ACEA A3/B4, API SP
• BMW Longlife-01, MB-Approval 229.5, Porsche A40, Renault RN0700 / RN0710, VW 502 00/ 505 00
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.3

• Compatible with petrol particulate filters
• Ensures consistent lubricant performance over extended drain intervals
• Excellent fuel efficiency
• Low speed pre-ignition prevention

•  ACEA C5, API SP, SN PLUS, SN-RC, ILSAC GF-6A
• BMW LONGLIFE-17 FE+, LONGLIFE-14 FE+, MERCEDES BENZ MB 229.72, MB 229.71, OPEL / VAUXHALL OV0401547, JAGUAR LAND ROVER STJLR.03.5006, FORD WSS-M2C947-B1, FIAT 9.55535-GSX, CHRYSLER MS-12145
• ILSAC GF-6A
• BMW LONGLIFE-17 FE+, LONGLIFE-14 FE+, MERCEDES BENZ MB 229.72, MB 229.71, OPEL / VAUXHALL OV0401547, JAGUAR LAND ROVER STJLR.03.5006, FORD WSS-M2C947-B1, FIAT 9.55535-GSX, CHRYSLER MS-12145

Technical Information

Engine oils: Motorcycle Motorcycle 4T eng oil -- Part Synthetic

Castrol POWER1 4T is an advanced, premium quality, part-synthetic engine oil developed for the latest generation 4-stroke motorcycle engines. It is designed specifically for bikers who love the exhilaration of riding. Up to 30% of power is lost due to friction without you knowing it. Castrol POWER1 4T with Power Release TechnologyTM boosts the performance of your bike by optimising friction and enables you to accelerate faster.

Application

Castrol POWER1 4T is designed to optimise performance for motorcycle engines. It is suitable for all makes of 4-stroke bikes, both carburetor or fuel injected where API SN (or below) and JASO MA or MA2 are recommended.

Advantages

• Tested and proven to deliver superior acceleration at the twist of the throttle
• Power Release TechnologyTM optimises friction in the clutch and reduces internal engine losses due to friction
• Complies with requirements of catalyst equipped engines

Product Performance Claims

• API SL
• JASO MA2

• Its Power Release Formula is specially designed to enable your bike to deliver maximum and sustained power right up to very high operating rpm thus offering a significant advantage over other motorcycle engine oils.
• Castrol Power1 4T reduces internal losses in the engine, whilst retaining optimum wet clutch performance to ensure efficient transfer of power to the rear wheel.
• Tested and proven to deliver improved acceleration at the touch of the throttle
• Castrol Power1 4T - engineered for performance

• API SN
• JASO MA2

• Tolerant of biodiesel contamination
• Combines high performance with fuel efficiency
• Exceptional long term additive response
• Designed specifically for the latest Peugeot & Citroen engines
• Provides protection for diesel particulate filters and catalytic converters

• ACEA C2
• PSA B71 2312

• Outstanding cold-start fluidity
• Exceptional long-term additive response
• Designed specifically for the latest Volvo engines
• Fuel economy formulation with no compromise in protection

• ACEA C5, API SN
• VOLVO VCC RBS0-2AE

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

• Castrol MAGNATEC 0W-30 C2 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C2, 0W-30 lubricant.
• Castrol MAGNATEC clings like a magnet to critical engine parts and locks in place to deliver 50% better engine wear protection*. Helping to safeguard your engine’s vital components - the valvetrain, timing chain, pistons, and bearings - from damage and wear.
• Forms a resistive barrier between metal contact points in the valvetrain
• Manages abrasive piston deposits, guarding against cylinder liner wear
• Maintains timing chain tension and engine synchronicity by minimising chain damage and elongation
• reserves engine bearings from corrosive wear

• Product Performance Claims: ACEA C2
• PSA Approval B71 2302, PSA Approval B71 2312
• Meets Fiat 9.55535-DS1/ GS1

Carlube Triple R 0W-20 R-Tec 2 is suitable for the latest fuel-efficient cars meeting Euro 6 where 0W-20 SAE grade is recommended.

It keeps hot running engine components clean including the prevention of deposit in Turbochargers.
The SAPS level ensures after-treatment operation over its lifetime including engines equipped with Gasoline Particulate Filters.
Carlube Triple R 0W-20 R-Tec 2 also provides multiple 0W-20 OEM specifications on one oil. This reduces complexity and the need to stock several oils.
The product delivers a high fuel economy in the latest OEM specifications. Delivers cleanliness and turbocharger protection in highly loaded engines

Technical Information

Leistungsstarkes Motoröl auf Basis ausgewählter Mineralöle. Sorgt für optimale Leistung und Schutz des Motors unter allen Betriebsbedingungen. Sichere Schmierung, optimale Geräuschdämpfung sowie geringer Verschleiß sind ebenso selbstverständlich wie sanftes Ein- und Auskuppeln sowie Schalten. Kat-getestet.

Technical Information

Heavy-duty motor oil based on selected mineral oils. Ensures optimum performance and protection of the engine under all operating conditions. Reliable lubrication, optimum noise damping and low wear are just as much taken for granted as gentle clutch engagement and disengagement and gear shifting. Tested on engines with catalytic converters.

• Combines high performance with fuel efficiency
• Exceptional long term additive response
• Designed specifically for the latest Ford diesel engines
• Provides protection for diesel particulate filters and catalytic converters

• ACEA C2
• FORD WSS-M2C950-A, JAGUAR LAND ROVER STJLR.03.5007

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under higher pressures than ever before. This means the oil has to be stronger to reduce friction and protect the engine.

Castrol EDGE 5W-30 M is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C3, API SN PLUS 5W-30 lubricant. Castrol EDGE 5W-30 M is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

Castrol EDGE 5W-30 M is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Independently tested at the highest standards
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Proven performance across a variety of driving conditions and temperatures

Specifications

• ACEA C3
• API SN PLUS
• BMW Longlife-04
• MB-Approval 229.31/ 229.51/ 229.52

• Suitable for use in hybrid cars
• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.*

• ACEA C3, API SN PLUS
• BMW Longlife-04, MB-Approval 229.31/ 229.51/ 229.52

• Provides high performance with excellent fuel efficiency
• Exceptional long term additive response
• Provides protection for diesel particulate filters and catalytic converters
• Particularly suitable for latest Mazda and Land Rover vehicles.

• ACEA C1
• FORD WSS-M2C934-B, Jaguar Land Rover STJLR.03.5005

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine. Application Castrol EDGE 5W-30 LL is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C3 Castrol EDGE 5W-30 LL is approved by leading manufacturers. Please refer to your owners handbook.

Castrol EDGE 5W-30 LL with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

Specification

• ACEA C3
• BMW Longlife-04
• MB-Approval 229.31/ 229.51
• Porsche C30
• VW 504 00/ 507 00

• Suitable for use in hybrid cars
• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.*

• ACEA C3
• BMW Longlife-04
• MB-Approval 229.31/ 229.51
• Porsche C30,VW 504 00/ 507 00

• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Designed for engines running on bio fuel mixtures (for example E85)
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Meets: ACEA C5, API: SN
• Jaguar Land Rover STJLR.03.5004, Ford WSS-M2C948-B (petrol engines), Backwards compatible with Ford WSS-M2C913-B, C and WSS-M2C925-B.Please refer to the product information sheet for specific Ford recommendation.

Carlube Triple R 0W-30 R-Tec 8 has been developed to offers after treatment device compatibility, superior cold-temperature performance whilst prolonging engine life, it meets the PSA Peugeot Citroen B71 2312 specification, which has been specially developed to sustain the most severe operating conditions.

This specification also requires improved cold flow properties to reduce the hydrodynamic friction of the oil, in order to obtain fuel economy benefits especially when the oil is cold.
Triple R 0W-30 R-Tec 8 provides excellent oil flow at start-up, even when cold, allowing critical engine components to be lubricated quicker. A top tier lower SAPS engine oil, meeting the latest European emission standards.

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Castrol GTX is one of the world's most trusted engine oils. It's more than just oil. It's liquid engineering that protects against the problems your engine faces every day.

Severe driving conditions can cause the build up of a thick, tar-like substance called sludge. Sludge can block your engine's vital oilways like cholesterol - and if untreated it can rob an engine of power and, ultimately, its life. Castrol GTX Double Action formula cleans away old sludge*, and protects against new sludge formation better than tough industry standards

Help extend the life of your engine with Castrol GTX.

Castrol GTX 5W-30 C4 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C4 5W-30 lubricant. Castrol GTX 5W-30 C4 is approved for use in vehicles that require a Renault RN 0720 approved 5W-30 lubricant. Castrol GTX 5W-30 C4 is approved for use in vehicles that require a MB-Approval 226.51 approved 5W-30 lubricant

• Provides superior protection against engine sludge
• Advanced protection against viscosity and thermal breakdown
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption

Specification

• ACEA C4
• MB-Approval 226.51
• Renault RN 0720

• Castrol GTX keeps engines cleaner for longer, 35% cleaner than industry standards
• Contains premium synthetic technology base oils and anti-wear additives
• Demonstrates exceptional protection against high temperature deposits
• Provides advanced protection against viscosity and thermal breakdown
• Delivers superior protection against sludge caused by pollutants, heat and frequent short trips.
• Castrol GTX: helps extend engine life

• ACEA C4
• MB-Approval 226.51, Renault RN 0720

• Exceptional low temperature performance
• Zero compromise in engine protection
• Ensures consistent lubricant performance over extended drain intervals
• Excellent fuel efficiency

• ACEA C5, API SN
• JAGUAR LAND ROVER STJLR.51.5122, MERCEDES BENZ MB 229.71

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently.

Castrol MAGNATEC's unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique protection designed specifically for modern driving

Castrol MAGNATEC. Non-stop protection from every start.

Application

Castrol MAGNATEC 0W-30 D is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C2 0W-30 lubricant.

Castrol MAGNATEC 0W-30 D is suitable for use in vehicles that require a 0W-30 lubricant that Meets Ford WSSM2C950-A specification.

Product Performance Claims

• ACEA C2
• Meets Ford WSS-M2C950-A

• Castrol MAGNATEC. Non-stop protection from every start.

• ACEA C2
• Meets Ford WSS-M2C950-A

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Drivers and mechanics have trusted Castrol GTX for over 50 years to help extend engine life. Castrol GTX's 3X-Clean formula has been developed to fight the three main causes of engine sludge: heat, contaminants and short trips. By cleaning away existing sludge and creating a barrier that helps stop deposits from forming, Castrol GTX keeps engines cleaner for longer, 35% cleaner than industry standards. This means drivers and their vehicles enjoy more years together. Castrol GTX: helps extend engine life

Application

Castrol GTX 5W-30 RN17 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3 5W-30 lubricant. Castrol GTX 5W-30 RN17 is approved for use in vehicles that require a Renault RN17 specification 5W-30 lubricant.

Advantages

• Delivers superior protection against sludge caused by pollutants, heat and frequent short trips.
• Provides advanced protection against viscosity and thermal breakdown.
• Demonstrates exceptional protection against high temperature deposits
• Contains premium synthetic technology base oils and anti-wear additives

Performance

• ACEA C3
• MB-Approval 226.52
• Renault RN 17

• Castrol GTX keeps engines cleaner for longer, 35% cleaner than industry standards
• Contains premium synthetic technology base oils and anti-wear additives
• Demonstrates exceptional protection against high temperature deposits
• Provides advanced protection against viscosity and thermal breakdown
• Delivers superior protection against sludge caused by pollutants, heat and frequent short trips.
• Castrol GTX: helps extend engine life

• ACEA C3
• MB-Approval 226.52
• Renault RN 17

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently. Uniquely, Castrol MAGNATEC's breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

Application

Castrol MAGNATEC 5W-30 A5 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA A1/B1, A5/B5, API SN, ILSAC GF-5 or earlier specification 5W-30 lubricant.

Castrol MAGNATEC 5W-30 A5 is approved for use in vehicles where a 5W-30 lubricant that Meets - Ford WSS-M2C913- C/WSS-M2C913-D is required, please refer to your owners handbook.

Product Performance Claims

• ACEA A1/B1, A5/B5
• API SN ILSAC GF-5
• Meets - Ford WSS-M2C913-C/WSS-M2C913-D

• Deliver unique protection designed specifically for modern driving
• Castrol MAGNATEC’s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to reduce warm-up and stop-start wear
• Castrol MAGNATEC: Non-stop protection from every start.

• ACEA A1/B1, A5/B5, API SN
• ILSAC GF-5
• Meets - Ford WSS-M2C913-C/WSS-M2C913-D

• Covers Longlife III applications
• Provides protection for diesel particulate filters and catalytic converters
• Suitable for VW, Audi, GM, BMW, Mercedes, Seat, Skoda, and certain Peugeot & Citroen models
• A highly versatile low SAPS engine oil for ACEA C3 applications

• ACEA C3, API SN
• VW 504.00/507.00, BMW LONGLIFE-04, MB 229.51, PORSCHE C30

Carlube Triple R 0W-40 R-Tec 12 has a unique technology that provides superior oxidation control, wear protection, cleanliness and acid neutralisation, Test results show that this oil has excellent low-temperature pump-ability with proven performance down to -40°C.

Even at these extreme temperatures, the oil protects bearings and vital components from weight loss, wear, and corrosion.
Triple R 0W-40 R-Tec 12 provides excellent fuel economy performance and keeps engines clean by reducing the build-up of sludge in critical areas.
This product offers excellent viscosity increase control in both gasoline and diesel engines and prevents varnishes from building up on pistons, keeping grooves cleaner and piston rings free.

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently.

Uniquely, Castrol MAGNATEC's breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

Application

Castrol Magnatec 5W-40 C3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3, API SN or earlier specification 5W-40 lubricant. Castrol Magnatec 5W-40 C3 is approved for use in a vehicles from a wide range of manufacturers, please refer to the specifications section and your vehicle handbook.

Product Performance Claims

• ACEA C3
• API SN Plus
• BMW Longlife-04
• Meets Fiat 9.55535-S2

Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.31/ 229.51/ 229.52

• Deliver unique patented protection designed specifically for modern driving
• Dramatically reduce both warm-up2 and stop-start3 wear by 50%
• Form a powerful force field of protection
• Castrol MAGNATEC: Non-stop protection from every start.

• ACEA C3, API SN Plus
• BMW Longlife-04, Meets Fiat 9.55535-S2
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.31/ 229.51/ 229.52

Carlube Triple R 5W-30 R-Tec 19 is an ultra high performing engine oil that has been developed to meet the exacting requirements of Volkswagen VW 504.00/507.00 performance level.

This oil is suitable for use in older vehicles as well as the most modern engines. As a lubricant that meets the highest performance engine oil specification, it provides superior engine cleanliness, wear protection, fuel economy and after treatment device compatibility, prevents the formation of harmful engine sludge and deposits. Keeps key components cool, clean, lubricated and working at their best, providing an impressive 1.7% improvement in fuel economy.

Carlube Triple R 0W-30 R-Tec 11 is an ultra-high performing engine oil that has been developed to provide maximum engine protection, fuel economy savings and meet the exacting requirements of BMW LL-12 FE performance level.

Triple R 0W-30 R-Tec 11 delivers a substantial fuel economy without compromising wear performance.
This oil provides excellent performance in piston cleanliness in a whole wide range of engines, controlling the viscosity increase, reducing the formation of sludge and keeping the turbocharger clean, for better engine efficiency and power output.
It provides enhanced engine reliability by controlling wear on critical engine parts exposed to severe mechanical stress.

• Provides protection for diesel particulate filters and catalytic converters
• Provides high performance with fuel efficiency
• Suitable for VW PD engines, GM dexos2, modern and certain Fiat & Ford KA models
• A highly advanced low SAPS engine oil

• ACEA C3, API SN/CF
• BMW LONGLIFE-04, GM Dexos 2, MB-229.51, MB-229.31, FIAT 9.55535-S2, FORD WSS-M2C917-A, Porsche A40, RENAULT RN0700, RN0710

• Provides high performance with fuel efficiency
• Exceptional long term additive response
• Provides protection for diesel particulate filters and catalytic converters
• Primarily designed for Vauxhall vehicles requiring Dexos 2 specification

• ACEA C3, API SN/CF
• BMW LONGLIFE-04, GM Dexos 2, MB-229.52, MB-229.51, MB-229.31, MB-226.5, VW 505 00/505 01, RENAULT RN0700, RN0710
• MB 229.52, 229.51, 229.31, 226.5
• BMW LONGLIFE-04, VW 502.00/505.01, RENAULT RN0700, RN0710

Carlube Triple R 0W-30 R-Tec 7 is a fully synthetic low SAPS engine oil suitable for vehicles with either diesel or petrol engines that are fitted with after-treatment devices to meet European emissions requirements

This oil will protect after-treatment devices such as Three-Way Catalysts (TWCs) or Diesel Particulate Filters (DPFs) for the lifetime of the vehicle.
Prevents the formation of sludge and deposits in the engine which can cause oil starvation and increased engine wear Low-SAPS technology therefore DPF, SCR & EGR compatible

Carlube Triple R 5W-30 R-Tec 23 is a trustworthy, reliable and robust engine oil that provides strong corrosion and wear protection to key components in an engine, maintaining a clean and high-performing engine for trouble-free driving.

Triple R 5W-30 R-Tec 23 is a mid-SAPs oil suitable for all diesel/gasoline Euro 4 and Euro 5 cars.
It carries the PSA B71 2290 (2014) specification, attained through outstanding fuel economy test results, whilst providing the highest level of piston cleanliness and engine protection. This also helps protect the environment from damaging pollution and contributes towards cleaner air quality.

• Provides outstanding wear protection
• Backwards compatible to Ford M2C913-A and 913-B specifications
• Delivers high performance with exceptional fuel efficiency
• Suitable for many Ford vehicles (excluding EcoBoost & EcoBlue engines)

• ACEA A5/B5, A1/B1, API SL/CF
• FORD WSS-M2C913-D, WSS-M2C913-C, JAGUAR LAND ROVER STJLR.03.5003, RENAULT RN0700
• FORD WSS-M2C913-D, WSS-M2C913-C, JAGUAR LAND ROVER STJLR.03.5003, RENAULT RN0700

Carlube Triple R 0W-30 R-Tec 10 contains a unique technology that provides superior oxidation control, wear protection, cleanliness and acid neutralisation.

This oil has excellent low-temperature pump-ability with proven performance down to -40°C.
The oil protects bearings and vital components from weight loss, wear, and corrosion.
Triple R 0W-30 R-Tec 10 provides excellent fuel economy performance and keeps engines clean by reducing the build-up of sludge in critical areas.

• Combines high performance with fuel efficiency
• Exceptional long term additive response
• Designed specifically for the latest Ford diesel engines
• Provides protection for diesel particulate filters and catalytic converters

• ACEA C2, FORD WSS-M2C950-A, JAGUAR LAND ROVER STJLR.03.5007

Carlube Triple R 0W-20 R-Tec 5 is a fully synthetic engine oil formulated to provide proven engine protection in those vehicles requiring the latest ACEA C5 specification, particularly new Jaguar Land Rover petrol and diesel engines.

Triple R 0W-20 R-Tec 5 provides excellent viscosity increase control in both old and new engines. This oil offers strong performance in regard to engine cleanliness, and also provides excellent oxidation control even in the presence of biodiesel.
Triple R 0W-20 R-Tec 5 exceeds all fuel economy requirements whilst also offering proven cam wear protection.

Carlube 2-Stroke Endurance Oil has been developed to satisfy and meet the requirements of water-cooled outboard marine 2-stroke engines for both leaded and unleaded petrol engines. The high resistance to water wash-off and corrosion protection makes it an ideal choice for boats, trailer wheel bearings, swivel hinges, pins, propeller shafts, cables and pulleys, winches and other routine marine maintenance.

High resistance to water wash-off. Corrosion protection. Excellent protection against piston scuffing and seizure. Ashless detergent, dispersant additives reduce engine deposits and ring sticking. Strong anti-gel performance. Excellent rust protection.

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently. Castrol MAGNATEC's unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to protect. Castrol MAGNATEC. Non-stop protection from every start.

Application

Castrol MAGNATEC 5W-30 C3 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an API SN, ACEA C3 or earlier specification 5W-30 lubricant.

Advantages

Castrol MAGNATEC's unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver protection designed specifically for modern driving

Product Performance Claims

• ACEA C3
• API SN
• BMW Longlife-04
• Renault RN0700 / RN0710
• Meets Fiat 9.55535-S3
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 226.5/ 229.31

• Deliver unique protection designed specifically for modern driving
• Castrol MAGNATEC’s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to reduce warm-up and stop-start wear
• Castrol MAGNATEC: Non-stop protection from every start.

• ACEA C3, API SN
• BMW Longlife-04, Renault RN0700 / RN0710, Meets Fiat 9.55535-S3
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 226.5/ 229.31

• Very high standards of engine cleanliness
• Fully synthetic, long drain formulation
• Compatibility with after treatment systems
• Fuel saving technology

• BMW LONGLIFE-12 FE

• Provides ultimate protection against wear under all operating conditions
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption Demonstrates up to 0 7% fuel economy improvement in relation to higher viscosity reference fluids (SAE 5W-30 to WSS M2C913 D)
• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Keeps engine extremely clean by minimizing deposits Passed the Daimler biodiesel oxidation test (80% diesel and 20% bio diesel)
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst) systems Low SAPS output keeps the emission control system clean and in optimal conditions
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions Designed to fulfill the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: GM dexos1 Gen 2 D10834IE103 Meets: API: SN, ILSAC GF-5
• API Resource Conserving

• Outstanding cold-start fluidity
• Exceptional long-term additive response
• Fuel economy formulation with no compromise in protection
• Designed for the latest petrol vehicles requiring low viscosity engine oils

• API SN, SN-RC, ILSAC GF-5

• Keeps engine extremely clean by minimizing deposits. Exceeds the ACEA A3/B3 limits for piston cleanliness in the Volkswagen TDI engine test
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• Formulated for excellent product stability. Long-lasting performance and suitable for long drain intervals
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: BMW LL-01, MB-Approval 229.5, VW Standard 502.00, 505.00 Meets: ACEA A3/B4, API: SL/CF
• MB 229.3, GM LL-A-025 and LL-B-025. Recommended for use where Fiat 9.55535.G1 is specified.