Engine Oils

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Up to 75% of engine wear happens while your engine warms up. When the engine stops oils drain off critical engine parts, however Castrol MAGNATEC 5W-40 DPF's intelligent molecules don't. They cling to the engine like a magnet providing an extra layer of protection.

Castrol MAGNATEC 5W-40 DPF's formulation protects from the moment you start, dramatically reducing* engine wear, for protection you can see, hear and feel.

Castrol MAGNATEC 5W-40 DPF. Instant Protection From The Moment You Start.

*As tested in the industry Sequence IVA wear test.

Application

Castrol MAGNATEC 5W-40 DPF is suitable for use in automotive diesel and gasoline engines where the manufacturer recommends an API CF/SN or ACEA C3 5W-40 lubricant including vehicles fitted with a diesel particulate filter.

Castrol MAGNATEC 5W-40 DPF is approved for use in vehicles from a number of leading manufacturers please refer to specifications and owner's hand book.

Advantages

• Synthetic Diesel technology to provide increased protection in high and low temperature applications;
• Provides continuous protection for all driving conditions, styles and temperatures;
• Delivers superior performance under extreme cold start up conditions

Castrol MAGNATEC 5W-40 DPF - suitable for TDI, DI, Inter-cooled, Turbocharged engines, CRDI engines.

Product Performance Claims

• ACEA C3
• API CF/SN
• Meets Fiat 9.55535-S2
• Meets Ford WSS-M2C917-A
• MB-Approval 229.31/ 229.51
• OPEL OV 040 1547 - D40
• VW 505.00/ 505.01

• Castrol MAGNATEC 5W-40 DPF’s formulation protects from the moment you start, dramatically reducing* engine wear, for protection you can see, hear and feel.
• Synthetic Diesel technology to provide increased protection in high and low temperature applications
• Provides continuous protection for all driving conditions, styles and temperatures
• Delivers superior performance under extreme cold start up conditions

• ACEA C3, API CF/SN
• Meets Fiat 9.55535-S2, Meets Ford WSS-M2C917-A, MB-Approval 229.31/ 229.51, OPEL OV 040 1547 - D40, VW 505.00/ 505.01

• Provides ultimate protection against wear under all operating conditions
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption Demonstrates up to 0 7% fuel economy improvement in relation to higher viscosity reference fluids (SAE 5W-30 to WSS M2C913 D)
• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Keeps engine extremely clean by minimizing deposits Passed the Daimler biodiesel oxidation test (80% diesel and 20% bio diesel)
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst) systems Low SAPS output keeps the emission control system clean and in optimal conditions
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions Designed to fulfill the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: GM dexos1 Gen 2 D10834IE103
• Meets: API: SN Plus RC (Resource Conserving)
• ILSAC GF-6

Carlube Triple R 0W-20 R-Tec 5 is a fully synthetic engine oil formulated to provide proven engine protection in those vehicles requiring the latest ACEA C5 specification, particularly new Jaguar Land Rover petrol and diesel engines.

Triple R 0W-20 R-Tec 5 provides excellent viscosity increase control in both old and new engines. This oil offers strong performance in regard to engine cleanliness, and also provides excellent oxidation control even in the presence of biodiesel.
Triple R 0W-20 R-Tec 5 exceeds all fuel economy requirements whilst also offering proven cam wear protection.

Carlube Triple R 0W-30 R-Tec 11 is an ultra-high performing engine oil that has been developed to provide maximum engine protection, fuel economy savings and meet the exacting requirements of BMW LL-12 FE performance level.

Triple R 0W-30 R-Tec 11 delivers a substantial fuel economy without compromising wear performance.
This oil provides excellent performance in piston cleanliness in a whole wide range of engines, controlling the viscosity increase, reducing the formation of sludge and keeping the turbocharger clean, for better engine efficiency and power output.
It provides enhanced engine reliability by controlling wear on critical engine parts exposed to severe mechanical stress.

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently. Uniquely, Castrol MAGNATEC's breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

Application

Castrol MAGNATEC 5W-30 A5 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA A1/B1, A5/B5, API SN, ILSAC GF-5 or earlier specification 5W-30 lubricant.

Castrol MAGNATEC 5W-30 A5 is approved for use in vehicles where a 5W-30 lubricant that Meets - Ford WSS-M2C913- C/WSS-M2C913-D is required, please refer to your owners handbook.

Product Performance Claims

• ACEA A1/B1, A5/B5
• API SN ILSAC GF-5
• Meets - Ford WSS-M2C913-C/WSS-M2C913-D

• Meets Ford WSS-M2C913-C/ WSS-M2C913-D
• Provides superior performance under extreme cold start-up conditions
• Proven to reduce wear in stop-start operation
• The molecules form a self-healing layer to protect at each of the critical stages of stop-start driving and beyond
• The Magnatec intelligent molecules cling to critical engine parts when the oil drains down - forming an extra layer that protects during start up and beyond

• Specifications: ACEA A1/B1, A5/B5, API SN, ILSAC GF4