Engine Oils

• Provides high performance with exceptional fuel economy
• Exceptional long term engine protection
• Provides protection for diesel particulate filters and catalytic converters
• An ideal choice for use in many Peugeot and Citroen vehicles

• ACEA C2, API SN/CF
• FIAT 9.55535-S1, PSA B71 2290 (Pre 2017), Renault RN0700

• Keeps engine extremely clean by minimizing deposits. Exceeds the ACEA A3/B3 limits for piston cleanliness in the Volkswagen TDI engine test
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• Formulated for excellent product stability. Long-lasting performance and suitable for long drain intervals
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: BMW LL-04, MB 229.51, Porsche C30, VW Standard 504.00/507.00*. Meets: ACEA C3
• MB 229.31

• Combines high performance with fuel efficiency
• Exceptional long term additive response
• Provides protection for diesel particulate filters and catalytic converters
• Covers the ACEA C2 low SAPS oil specification

• ACEA C2, API SM/CF

• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition. Keeps engine extremely clean by minimizing deposits
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption
• Officially approved by Volvo for service fill under Volvo VCC RBS0-2AE specification
• Through use of synthetic base oil technology, SynPower FE fights the three major causes of engine stress: heat, deposits and wear
• OEM approved premium grade motor oil

• Approved: Volvo VCC RBSO-2AE Meets: ACEA C5

• Low Speed pre-ignition protection incorporated
• Valvoline Hybrid C-Series engine oils can also be used in engines that require an ACEA: C3, API: SP and API: SN engine oil in the SAE 5W30 viscosity grade
• Enhanced oxidation stability to ensure engine durability in the most severe stop-start cycles
• Excellent water tolerance and separation capability to prevent sludge forming
• Enhanced soot control to prevent premature oil degradation
• Enhanced oxidation stability to ensure engine durability in the most adverse stop-start situations. Improved oil flow and fast response at low temperature to prevent wear during the most severe stop-start conditions
• Enhanced anti-wear additives to ensure a longer engine life and maintain vehicle efficiency
• Valvoline Hybrid C-series engine oils are formulated with specially selected additives and antioxidants to ensure an increased level of protection in terms of oxidation, corrosion and wear especially for the hybrid vehicle challenges when compared to conv

• Meets: ACEA: C5
• API: SN, SP

• Tolerant of biodiesel contamination
• Combines high performance with fuel efficiency
• Exceptional long term additive response
• Designed specifically for the latest Peugeot & Citroen engines
• Provides protection for diesel particulate filters and catalytic converters

• ACEA C2
• PSA B71 2312

• High thermal and oxidation stability resists oil breakdown
• Strong oil film in combination with specialized additives provide high resistance against extreme pressure and high operating temperatures
• Enhanced anti-foaming formulation ensures superior protection at high engine rpm
• VR1 Racing is formulated for ultimate performance under extreme operating conditions Contains special additives that ensure optimal power output and maximum wear resistance for both turbocharged and non turbo charged petrol engines
• Maximum race-level performance and protection

• Meets: ACEA A3/B4, API: SL
• Ford WSS-M2C-153E, GM 6094M, Koenigsegg

Carlube Triple R 10W-60 R-Tec 33 is a technically advanced fully synthetic engine oil designed for the latest generation of high-performance engines, to provide advanced levels of wear protection and performance compared to conventional oils.

It provides excellent engine performance under all driving conditions, excellent cold-weather starting and rapid circulation, and lower oil consumption due to synthetic base.
Lower oil consumption due to synthetic base stocks Excellent cold-weather starting and rapid circulation

Carlube Triple R 0W-30 R-Tec 9 has advanced additive technology that provides powerful detergency and the ability to prevent the build-up of piston deposits, allowing the lubricant to meet the stringent demands and exacting requirements of the VW 504.00/507.00 specification.

This engine oil is designed to lubricate high power modern based engines.
The formulation maintains a good lubricant flow throughout the engine enhancing the lubrication of all engine parts whilst also preventing wear. Provides excellent engine durability as well as giving fuel economy benefits

Carlube Triple R 0W-30 R-Tec 10 contains a unique technology that provides superior oxidation control, wear protection, cleanliness and acid neutralisation.

This oil has excellent low-temperature pump-ability with proven performance down to -40°C.
The oil protects bearings and vital components from weight loss, wear, and corrosion.
Triple R 0W-30 R-Tec 10 provides excellent fuel economy performance and keeps engines clean by reducing the build-up of sludge in critical areas.

Carlube Triple R 0W-20 R-Tec 2 is suitable for the latest fuel-efficient cars meeting Euro 6 where 0W-20 SAE grade is recommended.

It keeps hot running engine components clean including the prevention of deposit in Turbochargers.
The SAPS level ensures after-treatment operation over its lifetime including engines equipped with Gasoline Particulate Filters.
Carlube Triple R 0W-20 R-Tec 2 also provides multiple 0W-20 OEM specifications on one oil. This reduces complexity and the need to stock several oils.
The product delivers a high fuel economy in the latest OEM specifications. Delivers cleanliness and turbocharger protection in highly loaded engines

• Contains a unique chemical marker to guarantee authenticity
• Zero compromise in engine protection
• Excellent fuel efficiency
• Ensures consistent lubricant performance over extended drain intervals

• ACEA C5, API SN Plus | VW 508.00 / 509.00 (TL 52577), PORSCHE C20
• VW 508.00 / 509.00 (TL 52577), PORSCHE C20

• Provides ultimate protection against wear under all operating conditions
• Can also be used where Renault RN0700 or RN0710 is required in the 5W-30 viscosity grade
• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Keeps engine extremely clean by minimizing deposits
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and GPF (Gasoline Particulate Filter)
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions Designed to fulfill the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: Renault RN-17
• Meets ACEA C3
• API SN

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Part synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently.

Uniquely, Castrol MAGNATEC's breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

Application

Castrol MAGNATEC 10W-40 A/B is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA A3/B4, API SP 10W-40 lubricant. Castrol MAGNATEC 10W-40 A/B is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

Product Performance Claims

• ACEA A3/B4
• API SP
• Meets - Fiat 9.55535-D2
• MB-Approval 229.3
• VW 501 01/ 505 00

• Castrol MAGNATEC’s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to protect..
• DUALOCK molecules cling to critical engine parts and lock to protect and reduce warm-up wear
• Deliver protection designed specifically for modern driving
• Castrol MAGNATEC. Non-stop protection from every start.

• ACEA A3/B4, API SP
• MB-Approval 226.5/ 229.3, Renault RN0700 / RN0710, VW 501 01/ 505 00, Meets Fiat 9.55535-D2

Carlube Triple R 0W-20 R-Tec 5 is a fully synthetic engine oil formulated to provide proven engine protection in those vehicles requiring the latest ACEA C5 specification, particularly new Jaguar Land Rover petrol and diesel engines.

Triple R 0W-20 R-Tec 5 provides excellent viscosity increase control in both old and new engines. This oil offers strong performance in regard to engine cleanliness, and also provides excellent oxidation control even in the presence of biodiesel.
Triple R 0W-20 R-Tec 5 exceeds all fuel economy requirements whilst also offering proven cam wear protection.

Carlube Triple R 0W-30 R-Tec 11 is an ultra-high performing engine oil that has been developed to provide maximum engine protection, fuel economy savings and meet the exacting requirements of BMW LL-12 FE performance level.

Triple R 0W-30 R-Tec 11 delivers a substantial fuel economy without compromising wear performance.
This oil provides excellent performance in piston cleanliness in a whole wide range of engines, controlling the viscosity increase, reducing the formation of sludge and keeping the turbocharger clean, for better engine efficiency and power output.
It provides enhanced engine reliability by controlling wear on critical engine parts exposed to severe mechanical stress.

• Low Speed pre-ignition protection incorporated
• Valvoline Hybrid C-Series engine oils can also be used in engines that require an ACEA: C2, API: SP and API: SN engine oil in the SAE 5W30 viscosity grade.
• Enhanced oxidation stability to ensure engine durability in the most severe stop-start cycles
• Excellent water tolerance and separation capability to prevent sludge forming
• Enhanced soot control to prevent premature oil degradation
• Enhanced oxidation stability to ensure engine durability in the most adverse stop-start situations. Improved oil flow and fast response at low temperature to prevent wear during the most severe stop-start conditions
• Enhanced anti-wear additives to ensure a longer engine life and maintain vehicle efficiency
• Valvoline Hybrid C-series engine oils are formulated with specially selected additives and antioxidants to ensure an increased level of protection in terms of oxidation, corrosion and wear especially for the hybrid vehicle challenges when compared to conv

• Meets: ACEA: C5
• API: SN, SP

• Provides ultimate protection against wear under all operating conditions
• Reduces friction which results in lower fuel consumption
• Keeps engine extremely clean by minimizing deposits
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and GPF (Gasoline Particulate Filter) where the viscosity 0W-20 is allowed
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions Designed to fulfill the latest standards of leading engine manufacturers

• Approved: Jaguar Land Rover STJLR 51.5.122
• MB-Approval 229.71
• Meets ACEA C6

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Up to 75% of engine wear happens while your engine warms up. When the engine stops oils drain off critical engine parts, however Castrol MAGNATEC 5W-40 DPF's intelligent molecules don't. They cling to the engine like a magnet providing an extra layer of protection.

Castrol MAGNATEC 5W-40 DPF's formulation protects from the moment you start, dramatically reducing* engine wear, for protection you can see, hear and feel.

Castrol MAGNATEC 5W-40 DPF. Instant Protection From The Moment You Start.

*As tested in the industry Sequence IVA wear test.

Application

Castrol MAGNATEC 5W-40 DPF is suitable for use in automotive diesel and gasoline engines where the manufacturer recommends an API CF/SN or ACEA C3 5W-40 lubricant including vehicles fitted with a diesel particulate filter.

Castrol MAGNATEC 5W-40 DPF is approved for use in vehicles from a number of leading manufacturers please refer to specifications and owner's hand book.

Advantages

• Synthetic Diesel technology to provide increased protection in high and low temperature applications;
• Provides continuous protection for all driving conditions, styles and temperatures;
• Delivers superior performance under extreme cold start up conditions

Castrol MAGNATEC 5W-40 DPF - suitable for TDI, DI, Inter-cooled, Turbocharged engines, CRDI engines.

Product Performance Claims

• ACEA C3
• API CF/SN
• Meets Fiat 9.55535-S2
• Meets Ford WSS-M2C917-A
• MB-Approval 229.31/ 229.51
• OPEL OV 040 1547 - D40
• VW 505.00/ 505.01

• Castrol MAGNATEC 5W-40 DPF’s formulation protects from the moment you start, dramatically reducing* engine wear, for protection you can see, hear and feel.
• Synthetic Diesel technology to provide increased protection in high and low temperature applications
• Provides continuous protection for all driving conditions, styles and temperatures
• Delivers superior performance under extreme cold start up conditions

• ACEA C3, API CF/SN
• Meets Fiat 9.55535-S2, Meets Ford WSS-M2C917-A, MB-Approval 229.31/ 229.51, OPEL OV 040 1547 - D40, VW 505.00/ 505.01

• Low viscosity and special additives result in maximum reduction friction which results in a lower fuel consumption.
• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition.
• Provides ultimate protection against wear under all operating conditions
• Keeps engine extremely clean by minimizing deposits
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfill the latest standards of leading engine manufacturers.

• BMW LL-12 FE
• Recommended for in-warranty service fill where Ford WSS-M2C950-A is required
• MB-Approval 229.61
• ACEA C2 ACEA A5/B5 API SP-RC, SP, SN Plus ILSAC GF-6A
• Recommended for use by Valvoline where Fiat 9.55535-GS1, DS1 or Iveco 1811 SC1 LV-16 is required

• Keeps engine extremely clean by minimizing deposits. Exceeds the ACEA A3/B3 limits for piston cleanliness in the Volkswagen TDI engine test
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• Formulated for excellent product stability. Long-lasting performance and suitable for long drain intervals
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: PSA B71 2312 for service fill (MA6) Meets: ACEA C2
• Meets requirements of Citroën*

• High thermal and oxidation stability resists oil breakdown
• Strong oil film in combination with specialised additives provide high resistance against extreme pressure and high operating temperatures
• Enhanced anti-foaming formulation ensures superior protection at high engine rpm
• VR1 Racing is formulated for ultimate performance under extreme operating conditions. Contains special additives that ensure optimal power output and maximum wear resistance for both turbocharged and non turbo charged petrol engines
• Maximum race-level performance and protection

• Meets: ACEA A3/B4, API: SL
• Ford WSS-M2C-153E, GM 6094M. Recommended for use where Fiat 9.55535.H3 is specified

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Up to 75% of engine wear happens while your engine warms up. When the engine stops, oil drains off critical engine parts, however Castrol MAGNATEC's Intelligent Molecules don't. They cling to the engine like a magnet, providing an extra layer of protection. Castrol MAGNATEC's formulation protects from the moment you start, dramatically reducing engine wear*. Castrol MAGNATEC. Instant Protection From The Moment You Start.

*As tested in the industry Sequence IVA wear test.

Application

Castrol MAGNATEC 5W-30 C2 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C2 5W-30 lubricant.

Castrol MAGNATEC 5W-30 C2 is approved for use in Peugeot Citroen vehicles that require a PSA Approval B71 2290 5W-30 lubricant.

Advantages

Castrol MAGNATEC's Intelligent Molecules:

• Cling to engine parts when the oil drains down
• Adsorbs to metal surfaces to make engine parts more resistant to wear
• Are combined with synthetic technology to provide increased protection in high and low temperature applications
• Provide continuous protection for different driving conditions, styles and temperatures

Product Performance Claims

• ACEA C2
• PSA Approval B71 2290

• Castrol MAGNATEC’s formulation protects from the moment you start, dramatically reducing engine wear
• Provide continuous protection for different driving conditions, styles and temperatures
• combined with synthetic technology to provide increased protection in high and low temperature applications
• Adsorbs to metal surfaces to make engine parts more resistant to wear
• Cling to engine parts when the oil drains down
• Castrol MAGNATEC: Non-stop protection from every start.

• ACEA C2
• PSA Approval B71 2290

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Castrol GTX is one of the world's most trusted engine oils. It's more than just oil. It's liquid engineering that protects against the problems your engine faces every day.

Severe driving conditions can cause the build up of a thick, tar-like substance called sludge. Sludge can block your engine's vital oilways like cholesterol - and if untreated it can rob an engine of power and, ultimately, its life. Castrol GTX Double Action formula cleans away old sludge*, and protects against new sludge formation better than tough industry standards

Help extend the life of your engine with Castrol GTX.

Castrol GTX 5W-30 C4 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C4 5W-30 lubricant. Castrol GTX 5W-30 C4 is approved for use in vehicles that require a Renault RN 0720 approved 5W-30 lubricant. Castrol GTX 5W-30 C4 is approved for use in vehicles that require a MB-Approval 226.51 approved 5W-30 lubricant

• Provides superior protection against engine sludge
• Advanced protection against viscosity and thermal breakdown
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption

Specification

• ACEA C4
• MB-Approval 226.51
• Renault RN 0720

• Castrol GTX keeps engines cleaner for longer, 35% cleaner than industry standards
• Contains premium synthetic technology base oils and anti-wear additives
• Demonstrates exceptional protection against high temperature deposits
• Provides advanced protection against viscosity and thermal breakdown
• Delivers superior protection against sludge caused by pollutants, heat and frequent short trips.
• Castrol GTX: helps extend engine life

• ACEA C4
• MB-Approval 226.51, Renault RN 0720

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently.

Uniquely, Castrol MAGNATEC's breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

Application

Castrol Magnatec 5W-40 C3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3, API SN or earlier specification 5W-40 lubricant. Castrol Magnatec 5W-40 C3 is approved for use in a vehicles from a wide range of manufacturers, please refer to the specifications section and your vehicle handbook.

Product Performance Claims

• ACEA C3
• API SN Plus
• BMW Longlife-04
• Meets Fiat 9.55535-S2

Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.31/ 229.51/ 229.52

• Deliver unique patented protection designed specifically for modern driving
• Dramatically reduce both warm-up2 and stop-start3 wear by 50%
• Form a powerful force field of protection
• Castrol MAGNATEC: Non-stop protection from every start.

• ACEA C3, API SN Plus
• BMW Longlife-04, Meets Fiat 9.55535-S2
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.31/229.51/ 229.52