Engine Oils

• Ideal for engines in classic vehicles
• Cost effective
• For petrol and diesel engines

• API CC/SE
• CCMC D1, MIL-L-2104B, MIL-L-46152B

Carlube Triple R 0W-30 R-Tec 8 has been developed to offers after treatment device compatibility, superior cold-temperature performance whilst prolonging engine life, it meets the PSA Peugeot Citroen B71 2312 specification, which has been specially developed to sustain the most severe operating conditions.

This specification also requires improved cold flow properties to reduce the hydrodynamic friction of the oil, in order to obtain fuel economy benefits especially when the oil is cold.
Triple R 0W-30 R-Tec 8 provides excellent oil flow at start-up, even when cold, allowing critical engine components to be lubricated quicker. A top tier lower SAPS engine oil, meeting the latest European emission standards.

Carlube Triple R 5W-20 R-Tec 14 meets the Ford M2C948-B specification, which is primarily designed for the 1.0 liter, three-cylinder EcoBoost engine, and also offers backward compatibility.

Engine oils that meet this specification must provide a 0.9% fuel economy improvement over regular 5W-20 oils during testing.
Triple R 5W-20 R-Tec 14 reduces internal friction within the engine in order to deliver full power, while at the same time generating fuel savings.
As a lighter viscosity engine oil, Carlube Triple R 5W-20 R-Tec 14 provides faster flow to engine parts even at low temperatures due to its extreme fluidity. This will result in reduced metal-to-metal contact and continuous oil flow around the engine.

Carlube Triple R 0W-20 R-Tec 4 has been formulated to meet API SN and ILSAC GF-5 specifications. An oil meeting these demanding specifications must demonstrate a range of performance parameters.

Triple R 0W-20 R-Tec 4 delivers excellent performance in both engine protection and cleanliness.
It provides high-temperature deposit protection for pistons and turbochargers whilst improving sludge control.
Additional benefits include enhanced fuel-efficiency and ethanol fuel compatibility.

Carlube SAE30 Classic Motor Oil is a specialist lubricant designed for use in veteran, vintage and classic motor vehicles. The high-quality, low detergent monograde mineral lubricants are suitable for use in naturally aspirated 4 stroke petrol and diesel engines and manual operated gearboxes of that age, providing maximum protection to prolong the life performance of treasured classics.

Provides optimum lubrication protection. Non-detergent motor oil. Meets period performance requirements. Ideal for cold autumn & winter conditions and lower viscosity ensures rapid circulation.

Carlube Triple R 5W-30 R-Tec 25 is a fully synthetic, low SAPS engine oil designed to deliver superior protection and performance for the latest generation of petrol and diesel engines.

Triple R 5W-30 R-Tec 25 has been specially formulated to meet and exceed both the ACEA C3 and C4 specifications as well as Renault RN0720.
The Renault RN0720 performance parameters add to the ACEA baseline with additional performance requirements in areas such as detergency, oxidation, and durability; it is designed to reduce particulate build-up and poisoning within the after-treatment systems.

• Outstanding thermal stability at elevated temperatures
• Highly shear stable
• Excellent anti-wear protection
• Low volatility greatly reduces oil consumption
• High film strength provides superior engine protection

• ACEA A3/B3, A3/B4, API SN/CF

Carlube Triple R 5W-30 R-Tec 24 is a fully synthetic, lower SAPS (Low in Sulfated Ash, Phosphorus, and Sulfur) engine oil designed to deliver advanced protection for the latest generation of petrol or diesel engines.

It is designed to reduce particulate build-up in the exhaust after-treatment systems.
Triple R 5W-30 R-Tec 24 has been specially developed to meet and exceed the ACEA C1 specification. Engine oils meeting the C1 specification will increase the life of after-treatment devices and improve the vehicle’s fuel economy.

• Promotes reduced fuel consumption
• Excellent high and low temperature stability
• Extended drain intervals
• After treatment system compatible

• ACEA C2, C3, API SN/CF

• Provides ultimate engine protection for all driving condition
• Not to be used in vehicles with diesel particulate filters
• Suitable for a wide range of vehicles
• Excellent high temperature stability

• ACEA A3/B3, A3/B4 | API SN/CF
• VW 502.00 / 505.00, 229.3, GM LL-B-025, PSA B71 2296, RENAULT RN0700, RN0710, PORSCHE A40
• VW 502.00, 505.00, 501.01, MB 229.5, 229.3, GM LL-B-025, BMW LL-01, PSA B71 2296, RENAULT RN0700, RN0710, PORSCHE A40

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Mineral Multi

Castrol GTX is one of the world's most trusted motor oils. It's more than just oil. It's liquid engineering that protects against problems, like sludge, that your engine faces every day. Severe driving conditions such as every day stop-and-go/stop-start traffic, harsh weather conditions and extended drain intervals, can all cause the build-up of a thick, tar-like substance called sludge. You can't see this sludge build-up but it can damage your engine's performance and cause premature engine failure. Protect your car from harmful sludge build-up with Castrol GTX.

Application

GTX 15W-40 A3/B3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an API SL/CF or ACEA A3/B3 15W-40 lubricant. GTX 15W-40 A3/B3 is also approved for use in VW group vehicles and Mercedes Benz vehicles that require a VW 501 01/ 505 00 or MBApproval 229.1 15W-40 lubricant

Advantages

• Contains anti-sludge formula that provides 25% better sludge protection compared to tough industry standards
• Superior protection against viscosity and thermal breakdown
• Anti-wear additives that extend the life of your engine

Product Performance Claims

• ACEA A3/B3
• API SN
• MB-Approval
• 229.1
• VW 501 01 / 505 00
• Meets Fiat 9.55535-D2

• Castrol GTX keeps engines cleaner for longer, 35% cleaner than industry standards
• Contains premium synthetic technology base oils and anti-wear additives
• Demonstrates exceptional protection against high temperature deposits
• Provides advanced protection against viscosity and thermal breakdown
• Delivers superior protection against sludge caused by pollutants, heat and frequent short trips.
• Castrol GTX: helps extend engine life

• ACEA A3/B4, API SP
• VW 501 01 / 505 00, Meets Fiat 9.55535-D2
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.1

• Provides ultimate engine protection for all driving conditions
• Suitable for a wide range of vehicles
• Blended with high quality synthetic and mineral base materials
• Recommended for use in pre-2009 Ford engines

• FORD WSS-M2C913-B, WSS-M2C913-A
• ACEA A5/B5, A1/B1, API SL/CF

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Part synthetic

Drivers and mechanics have trusted Castrol GTX for over 50 years to help extend engine life. Castrol GTX's 3X-Clean formula has been developed to fight the three main causes of engine sludge: heat, contaminants and short trips. By cleaning away existing sludge and creating a barrier that helps stop deposits from forming, Castrol GTX keeps engines cleaner for longer, 35% cleaner than industry standards.* This means drivers and their vehicles enjoy more years together. Castrol GTX: helps extend engine life.

Advantages

The Castrol GTX range:

• Delivers superior protection against sludge caused by pollutants, heat and frequent short trips.
• Provides advanced protection against viscosity and thermal breakdown.
• Demonstrates exceptional protection against high temperature deposits
• Contains premium synthetic technology base oils and anti-wear additives

Product Performance Claims

• ACEA A3/B4
• API SP
• Meets Fiat 9.55535-D2 / 9.55535-G2
• MB-Approval 226.5/ 229.3
• Renault RN 0700 / RN 0710
• VW 501 01/ 505 00

• Anti-wear additive technology to extend engine life
• Offers advanced protection against viscosity and thermal breakdown
• Provides 50% better protection against sludge than latest industry standard
• Specially engineered to reduce oil deposits and provide daily engine protection

• Specifications:ACEA A3/B3, A3/B4, API SL/CF
• Manufacturers Approvals: MB-Approval 229.1, VW 501 01/ 505 00, Meets Fiat 9.55535-D2/G2

Carlube Triple R SAE 50 R-Tec 43 mineral oil is formulated using the highest quality blend of mineral-based oils.

Mineral oils are mixed with advanced technology additives to give high anti-wear and detergency properties, thus providing longer engine life and maintaining maximum performance.
Carlube Triple R SAE 50 R-Tec 43 is tried, tested, and proven to provide strong wear protection, face the stresses of everyday driving with ease, tackling cold winter months in Northern Europe and beyond.
It protects engine components, maintaining a clean and high performing motor and strong corrosion protection.

• Reduces turbocharger deposits
• Provides high performance with fuel efficiency
• Reduces sludge and improves engine cleanliness
• Significantly reduces low speed pre-Ignition

• API SP, ILSAC GF-6A
• GM Dexos 1 Gen 3, SP-RC, SN PLUS, FORD WSS-M2C946-A

Carlube Triple R 0W-30 R-Tec 10 contains a unique technology that provides superior oxidation control, wear protection, cleanliness and acid neutralisation.

This oil has excellent low-temperature pump-ability with proven performance down to -40°C.
The oil protects bearings and vital components from weight loss, wear, and corrosion.
Triple R 0W-30 R-Tec 10 provides excellent fuel economy performance and keeps engines clean by reducing the build-up of sludge in critical areas.

• Outstanding cold-start fluidity
• Exceptional long-term additive response
• Fuel economy formulation with no compromise in protection
• Designed for the latest petrol vehicles requiring low viscosity engine oils

• API SN, SN-RC, ILSAC GF-5

• Provides high performance with exceptional fuel economy
• Exceptional long term engine protection
• Provides protection for diesel particulate filters and catalytic converters
• An ideal choice for use in many Peugeot and Citroen vehicles

• ACEA C2, API SN/CF
• FIAT 9.55535-S1, PSA B71 2290 (Pre 2017), Renault RN0700

• Provides outstanding wear protection
• Backwards compatible to Ford M2C913-A and 913-B specifications
• Delivers high performance with exceptional fuel efficiency
• Suitable for many Ford vehicles (excluding EcoBoost & EcoBlue engines)

• ACEA A5/B5, A1/B1, API SL/CF
• FORD WSS-M2C913-D, WSS-M2C913-C, JAGUAR LAND ROVER STJLR.03.5003, RENAULT RN0700
• FORD WSS-M2C913-D, WSS-M2C913-C, JAGUAR LAND ROVER STJLR.03.5003, RENAULT RN0700

Carlube Triple R 10W-60 R-Tec 33 is a technically advanced fully synthetic engine oil designed for the latest generation of high-performance engines, to provide advanced levels of wear protection and performance compared to conventional oils.

It provides excellent engine performance under all driving conditions, excellent cold-weather starting and rapid circulation, and lower oil consumption due to synthetic base.
Lower oil consumption due to synthetic base stocks Excellent cold-weather starting and rapid circulation

Carlube Triple R 0W-40 R-Tec 12 has a unique technology that provides superior oxidation control, wear protection, cleanliness and acid neutralisation, Test results show that this oil has excellent low-temperature pump-ability with proven performance down to -40°C.

Even at these extreme temperatures, the oil protects bearings and vital components from weight loss, wear, and corrosion.
Triple R 0W-40 R-Tec 12 provides excellent fuel economy performance and keeps engines clean by reducing the build-up of sludge in critical areas.
This product offers excellent viscosity increase control in both gasoline and diesel engines and prevents varnishes from building up on pistons, keeping grooves cleaner and piston rings free.