Engine Oils

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently.

Uniquely, Castrol MAGNATEC's breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

Application

Castrol Magnatec 5W-40 C3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3, API SN or earlier specification 5W-40 lubricant. Castrol Magnatec 5W-40 C3 is approved for use in a vehicles from a wide range of manufacturers, please refer to the specifications section and your vehicle handbook.

Product Performance Claims

• ACEA C3
• API SN Plus
• BMW Longlife-04
• Meets Fiat 9.55535-S2

Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.31/ 229.51/ 229.52

• Deliver unique patented protection designed specifically for modern driving
• Dramatically reduce both warm-up2 and stop-start3 wear by 50%
• Form a powerful force field of protection
• Castrol MAGNATEC: Non-stop protection from every start.

• ACEA C3, API SN Plus
• BMW Longlife-04, Meets Fiat 9.55535-S2
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.31/ 229.51/ 229.52

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

• Castrol MAGNATEC 0W-30 C2 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C2, 0W-30 lubricant.
• Castrol MAGNATEC clings like a magnet to critical engine parts and locks in place to deliver 50% better engine wear protection*. Helping to safeguard your engine’s vital components - the valvetrain, timing chain, pistons, and bearings - from damage and wear.
• Forms a resistive barrier between metal contact points in the valvetrain
• Manages abrasive piston deposits, guarding against cylinder liner wear
• Maintains timing chain tension and engine synchronicity by minimising chain damage and elongation
• reserves engine bearings from corrosive wear

• Product Performance Claims: ACEA C2
• PSA Approval B71 2302, PSA Approval B71 2312
• Meets Fiat 9.55535-DS1/ GS1

Carlube Triple R 0W-30 R-Tec 7 is a fully synthetic low SAPS engine oil suitable for vehicles with either diesel or petrol engines that are fitted with after-treatment devices to meet European emissions requirements

This oil will protect after-treatment devices such as Three-Way Catalysts (TWCs) or Diesel Particulate Filters (DPFs) for the lifetime of the vehicle.
Prevents the formation of sludge and deposits in the engine which can cause oil starvation and increased engine wear Low-SAPS technology therefore DPF, SCR & EGR compatible

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Carlube Triple R 0W-30 R-Tec 11 is an ultra-high performing engine oil that has been developed to provide maximum engine protection, fuel economy savings and meet the exacting requirements of BMW LL-12 FE performance level.

Triple R 0W-30 R-Tec 11 delivers a substantial fuel economy without compromising wear performance.
This oil provides excellent performance in piston cleanliness in a whole wide range of engines, controlling the viscosity increase, reducing the formation of sludge and keeping the turbocharger clean, for better engine efficiency and power output.
It provides enhanced engine reliability by controlling wear on critical engine parts exposed to severe mechanical stress.

Carlube Triple R 0W-30 R-Tec 8 has been developed to offers after treatment device compatibility, superior cold-temperature performance whilst prolonging engine life, it meets the PSA Peugeot Citroen B71 2312 specification, which has been specially developed to sustain the most severe operating conditions.

This specification also requires improved cold flow properties to reduce the hydrodynamic friction of the oil, in order to obtain fuel economy benefits especially when the oil is cold.
Triple R 0W-30 R-Tec 8 provides excellent oil flow at start-up, even when cold, allowing critical engine components to be lubricated quicker. A top tier lower SAPS engine oil, meeting the latest European emission standards.

Carlube Triple R 0W-30 R-Tec 10 contains a unique technology that provides superior oxidation control, wear protection, cleanliness and acid neutralisation.

This oil has excellent low-temperature pump-ability with proven performance down to -40°C.
The oil protects bearings and vital components from weight loss, wear, and corrosion.
Triple R 0W-30 R-Tec 10 provides excellent fuel economy performance and keeps engines clean by reducing the build-up of sludge in critical areas.

Technical Information

Engine oils: Motorcycle Motorcycle 4T eng oil -- Part Synthetic

Castrol POWER1 4T is an advanced, premium quality, part-synthetic engine oil developed for the latest generation 4-stroke motorcycle engines. It is designed specifically for bikers who love the exhilaration of riding. Up to 30% of power is lost due to friction without you knowing it. Castrol POWER1 4T with Power Release TechnologyTM boosts the performance of your bike by optimising friction and enables you to accelerate faster.

Application

Castrol POWER1 4T is designed to optimise performance for motorcycle engines. It is suitable for all makes of 4-stroke bikes, both carburetor or fuel injected where API SN (or below) and JASO MA or MA2 are recommended.

Advantages

• Tested and proven to deliver superior acceleration at the twist of the throttle
• Power Release TechnologyTM optimises friction in the clutch and reduces internal engine losses due to friction
• Complies with requirements of catalyst equipped engines

Product Performance Claims

• API SL
• JASO MA2

• Its Power Release Formula is specially designed to enable your bike to deliver maximum and sustained power right up to very high operating rpm thus offering a significant advantage over other motorcycle engine oils.
• Castrol Power1 4T reduces internal losses in the engine, whilst retaining optimum wet clutch performance to ensure efficient transfer of power to the rear wheel.
• Tested and proven to deliver improved acceleration at the touch of the throttle
• Castrol Power1 4T - engineered for performance

• API SN
• JASO MA2