Engine Oils

• Always check the correct application on the Valvoline oil lookup: https://valvoline-eu.lubricantadvisor.com/en
• Thermal and oxidation stable oil film resists oil breakdown.
• Deposit control prevents forming of sludge and harmful deposits inside the engine.
• Through the use of detergent additives the engine is kept in good condition.
• Strong oil film provides protection against wear under all operating conditions.
• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition. For climate conditions below -20oC we advise SAE 10W-40..
• Broad vehicle application with high quality formulation suitable for a wide range of vehicles.
• All-Climate engine oils are formulated for year round performance. Meeting industry performance levels.
• Applications Formulated for turbo and nonturbocharged diesel, petrol and LPG engines. Can be used in passenger cars, light trucks, small marine engines and motorcycles without wet clutch. Also suitable for industrial equipment such as telehandlers or forklifts.

• Performance levels ACEA A3/B3 API: SL/CF MB-229.1 Recommended by Valvoline for use in engines specifying VW 50500 or VW 50101

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Mineral Multi

Castrol GTX is one of the world's most trusted motor oils. It's more than just oil. It's liquid engineering that protects against problems, like sludge, that your engine faces every day. Severe driving conditions such as every day stop-and-go/stop-start traffic, harsh weather conditions and extended drain intervals, can all cause the build-up of a thick, tar-like substance called sludge. You can't see this sludge build-up but it can damage your engine's performance and cause premature engine failure. Protect your car from harmful sludge build-up with Castrol GTX.

Application

GTX 15W-40 A3/B3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an API SL/CF or ACEA A3/B3 15W-40 lubricant. GTX 15W-40 A3/B3 is also approved for use in VW group vehicles and Mercedes Benz vehicles that require a VW 501 01/ 505 00 or MBApproval 229.1 15W-40 lubricant

Advantages

• Contains anti-sludge formula that provides 25% better sludge protection compared to tough industry standards
• Superior protection against viscosity and thermal breakdown
• Anti-wear additives that extend the life of your engine

Product Performance Claims

• ACEA A3/B3
• API SN
• MB-Approval
• 229.1
• VW 501 01 / 505 00
• Meets Fiat 9.55535-D2

• Castrol GTX keeps engines cleaner for longer, 35% cleaner than industry standards
• Contains premium synthetic technology base oils and anti-wear additives
• Demonstrates exceptional protection against high temperature deposits
• Provides advanced protection against viscosity and thermal breakdown
• Delivers superior protection against sludge caused by pollutants, heat and frequent short trips.
• Castrol GTX: helps extend engine life

• ACEA A3/B4, API SP
• VW 501 01 / 505 00, Meets Fiat 9.55535-D2
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.1

Carlube Triple R 0W-30 R-Tec 7 is a fully synthetic low SAPS engine oil suitable for vehicles with either diesel or petrol engines that are fitted with after-treatment devices to meet European emissions requirements

This oil will protect after-treatment devices such as Three-Way Catalysts (TWCs) or Diesel Particulate Filters (DPFs) for the lifetime of the vehicle. Prevents the formation of sludge and deposits in the engine which can cause oil starvation and increased engine wear Low-SAPS technology therefore DPF, SCR & EGR compatible

• Keeps engine extremely clean by minimizing deposits. Exceeds the ACEA A3/B3 limits for piston cleanliness in the Volkswagen TDI engine test
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• Formulated for excellent product stability. Long-lasting performance and suitable for long drain intervals
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: BMW LL-01
• MB-Approval 229.5
• Porsche A-40
• Renault RN 0700, RN 0710
• Meets: ACEA A3/B3, A3/B4,
• API: SL, SM, SN/CF
• GM LL-B-025
• MB-229.3, 226.5
• PSA B71 2296
• VW Standard 502.00, 505.00
• Recommended for use where Fiat 9.55535.H2, M2, N2 or Z2 is specified.

Carlube Triple R 5W-30 R-Tec 19 is an ultra high performing engine oil that has been developed to meet the exacting requirements of Volkswagen VW 504.00/507.00 performance level.

This oil is suitable for use in older vehicles as well as the most modern engines. As a lubricant that meets the highest performance engine oil specification, it provides superior engine cleanliness, wear protection, fuel economy and after treatment device compatibility, prevents the formation of harmful engine sludge and deposits. Keeps key components cool, clean, lubricated and working at their best, providing an impressive 1.7% improvement in fuel economy.