Generic Lighting
Categories
Important compatibility info
| Placement on Vehicle | Left, Right |
| Length | 30 mm |
| Height | 98 mm |
| Width | 98 mm |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with taillight (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Fitting |
| Quantity | 60 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | CCC approved |
| Fastening Type | 3-point attachment |
| Plug Type | open cable ends |
| Power Consumption | 1.8 W |
| Number of LEDs | 12 |
| LED Colour | Red |
| Type | Tail Light |
| Fulfils ECE norm | R7 |
| Function | Tail Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 30 mm |
| Height | 98 mm |
| Width | 98 mm |
| Voltage | 12 V |
| Bulb Type | LED |
| Light Function | with taillight (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Fitting |
| Quantity | 60 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Fastening Type | 3-point attachment |
| Plug Type | open cable ends |
| Power Consumption | 1.8 W |
| Number of LEDs | 12 |
| LED Colour | Red |
| Type | Tail Light |
| Fulfils ECE norm | R7 |
| Function | Tail Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
Important compatibility info
| Lens Colour | yellow (amber) |
| Registration Type | ECE approved |
| Type | Lens, rotating beacon |
| Function | Lens, rotating beacon |
| Light colour | yellow (amber) |
Important compatibility info
| Length | 100 mm |
| DIN / ISO | 72 591 |
| Type | Base, worklight / Holder / Holder, rotating beacon |
| Function | Base, worklight / Holder / Holder, rotating beacon |
| Additional Information 2 | with top, with screw connection |
| Diameter | 24 mm |
| Number of Poles | 2 -pin connector |
Important compatibility info
Important compatibility info
| Temperature range to | +60 °C |
| Temperature range from | -40 °C |
| Weight | 720 g |
| Height | 167 mm |
| Additional Information | with bulb |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | H1 |
| Light Function | With rotating warning signal |
| Housing Colour | Black |
| Outer diameter 1 | 135 mm |
| Light Design | Halogen |
| Mounting Type | Flexible pipe sockets |
| Quantity | 1 |
| Lens Colour | yellow (amber) |
| Registration Type | SAE approved |
| Power Consumption | 70 W |
| Protection Type (IP Code) | IPX9K, IP5K4K |
| Type | Rotating Beacon |
| Diffusing Lens Material | PC (Polycarbonate) |
| Fulfils ECE norm | R10, R65 |
| Housing material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | Rotating Beacon |
| Extra Description | Rota Compact |
| Rotating beacon RPM [1/min] | 180 1/min |
| Replaced by | 2XD013979-011 |
| Light colour | yellow (amber) |
Additional Information
- 1x Hella Lens, rotating beacon (9EL864074-001)
- 1x Hella Timing Belt Kit (9XR855975-001)
- 1x Hella Bulb (8GH002089-251)
Important compatibility info
| Temperature range to | +60 °C |
| Temperature range from | -40 °C |
| Weight | 890 g |
| Height | 194 mm |
| Additional Information | with bulb |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | H1 |
| Light Function | With rotating warning signal |
| Housing Colour | Yellow |
| Outer diameter 1 | 155 mm |
| Light Design | Halogen |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Lens Colour | yellow (amber) |
| Plug Type | Blade Terminal |
| Power Consumption | 70 W |
| Protection Type (IP Code) | IPX9K, IP5K4K |
| Type | Rotating Beacon |
| Diffusing Lens Material | PMMA (Polymethylmethacrylate) |
| Fulfils ECE norm | R65, R10 |
| Housing material | Plastic |
| Function | Rotating Beacon |
| Extra Description | KL 7000 |
| Rotating beacon RPM [1/min] | 192 1/min |
| Light colour | yellow (amber) |
Additional Information
- 1x Hella Lens, rotating beacon (9EL862141-001)
- 1x Hella Lens, rotating beacon (9EL862141-021)
- 1x Hella Timing Belt Kit (9XR854840-001)
- 1x Hella Electric Motor, rotating beacon (9MN862741-001)
- 1x Hella Reflector, rotating beacon (9DX862740-001)
- 1x Hella Bulb (8GH002089-251)
- 1x Hella Base, rotating beacon (9GD862164-001)
Important compatibility info
| Temperature range to | +60 °C |
| Temperature range from | -40 °C |
| Weight | 690 g |
| Height | 174 mm |
| Additional Information | with bulb |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | H1 |
| Light Function | With rotating warning signal |
| Housing Colour | Black |
| Outer diameter 1 | 135 mm |
| Light Design | Halogen |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Lens Colour | yellow (amber) |
| Plug Type | Blade Terminal |
| Power Consumption | 70 W |
| Protection Type (IP Code) | IPX9K, IP5K4K |
| Type | Rotating Beacon |
| Diffusing Lens Material | PC (Polycarbonate) |
| Fulfils ECE norm | R65, R10 |
| Housing material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | Rotating Beacon |
| Extra Description | Rotafix |
| Rotating beacon RPM [1/min] | 174 1/min |
| Fulfils test standard | RCM |
| Replaced by | 2XD013979-001 |
| Light colour | yellow (amber) |
Additional Information
- 1x Hella Lens, rotating beacon (9EL859020-001)
- 1x Hella Electric Motor, rotating beacon (9MN858114-011)
Important compatibility info
| Weight | 950 g |
| Height | 210 mm |
| Additional Information | with bulb |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 24 V |
| Bulb Type | H1 |
| Light Function | With rotating warning signal |
| Housing Colour | Orange |
| Outer diameter 1 | 165 mm |
| Shape/Form | Round |
| Light Design | Halogen |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Lens Colour | yellow (amber) |
| Plug Type | Blade Terminal |
| Power Consumption | 70 W |
| Protection Type (IP Code) | IPX9K, IP5K4K |
| Type | Rotating Beacon |
| Diffusing Lens Material | PMMA (Polymethylmethacrylate) |
| Fulfils ECE norm | R10, R65 |
| Housing material | Plastic |
| Function | Rotating Beacon |
| Extra Description | KL 700 |
| Rotating beacon RPM [1/min] | 160 1/min |
| Light colour | yellow (amber) |
| Temperature range from | -40 °C |
| Temperature range to | +60 °C |
Additional Information
- 1x Hella Lens, rotating beacon (9EL856418-001)
- 1x Hella Timing Belt Kit (9XR854840-001)
- 1x Hella Base, rotating beacon (9GD856562-001)
- 1x Hella Reflector, rotating beacon (9DX859560-001)
Important compatibility info
| Temperature range to | +60 °C |
| Temperature range from | -40 °C |
| Weight | 950 g |
| Height | 210 mm |
| Additional Information | with bulb |
| Additional Information 2 | Electromagnetic Compatibility (EMC) |
| Voltage | 12 V |
| Bulb Type | H1 |
| Light Function | With rotating warning signal |
| Housing Colour | Orange |
| Outer diameter 1 | 165 mm |
| Shape/Form | Round |
| Light Design | Halogen |
| Mounting Type | mounting, Bolted |
| Quantity | 1 |
| Lens Colour | yellow (amber) |
| Registration Type | ECE approved |
| Plug Type | Blade Terminal |
| Power Consumption | 55 W |
| Protection Type (IP Code) | IPX9K, IP5K4K |
| Type | Rotating Beacon |
| Diffusing Lens Material | PMMA (Polymethylmethacrylate) |
| Fulfils ECE norm | R65, R10 |
| Housing material | Plastic |
| Function | Rotating Beacon |
| Extra Description | KL 700 |
| Rotating beacon RPM [1/min] | 160 1/min |
| Light colour | yellow (amber) |
Additional Information
- 1x Hella Lens, rotating beacon (9EL856418-001)
- 1x Hella Timing Belt Kit (9XR854840-001)
- 1x Hella Bulb (8GH002089-133)
- 1x Hella Base, rotating beacon (9GD856562-001)
- 1x Hella Reflector, rotating beacon (9DX859560-001)
Important compatibility info
| Height | 46 mm |
| Width | 119 mm |
| Voltage | 24 V |
| Inspection Tag | ADR |
| Colour | Orange |
| Number of Connectors / Ports | 2 |
| Light Design | LED |
| Cable Length | 500 mm |
| Depth | 16 mm |
| Protection Type (IP Code) | IP67 |
| Type | Side Marker Light |
| Fulfils ECE norm | R10, R148, R150 |
| Temperature range from | -30 °C |
| Temperature range to | 60 °C |
| Function | Side Marker Light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 125 mm |
| Height | 45 mm |
| Voltage | 24 V |
| Inspection Tag | ADR |
| Light Design | LED |
| Depth | 44 mm |
| Protection Type (IP Code) | IP67 |
| Type | Side Marker Light |
| Fulfils ECE norm | R10, R148, R150 |
| Temperature range from | -30 °C |
| Temperature range to | 60 °C |
| Function | Side Marker Light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 41 mm |
| Width | 110 mm |
| Voltage | 24 V |
| Inspection Tag | ADR |
| Colour | Orange |
| Number of Connectors / Ports | 2 |
| Light Design | LED |
| Cable Length | 280 mm |
| Depth | 25 mm |
| Protection Type (IP Code) | IP67 |
| Type | Side Marker Light |
| Fulfils ECE norm | R10, R148, R150 |
| Temperature range from | -30 °C |
| Temperature range to | 60 °C |
| Function | Side Marker Light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 54 mm |
| Width | 104 mm |
| Voltage | 24 V |
| Colour | Orange |
| Number of Connectors / Ports | 2 |
| Light Design | LED |
| Cable Length | 2000 mm |
| Depth | 36 mm |
| Protection Type (IP Code) | IP67 |
| Type | Side Marker Light |
| Fulfils ECE norm | R10, R148, R150 |
| Temperature range from | -30 °C |
| Temperature range to | 60 °C |
| Function | Side Marker Light |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inspection Tag | EMC |
| Rated Power | 36 W, 12 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Cable Length | 350 mm |
| Depth | 65 mm |
| Voltage from | 9 V |
| Light Distribution | Long-range illumination |
| Voltage to | 32 V |
| Protection Type (IP Code) | IP6K9K |
| Type | Worklight |
| Fulfils ECE norm | R10, R148, R65 |
| Lumen | 3240 lm |
| Function | Worklight |
| Extra Description | febi Plus |
| Height | 136 mm |
| Width | 110 mm |
| Housing material | Aluminium |
| Temperature range from | -40 °C |
| Temperature range to | 60 °C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Light Design | LED |
| Colour | Orange |
| Placement on Vehicle | both sides |
| Number of Connectors / Ports | 2 |
| Cable Length | 1250 mm |
| Type | Side Marker Light |
| Fulfils ECE norm | R3, R91 |
| Function | Side Marker Light |
| Voltage | 24 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Manufacturer | Aspöck |
| Placement on Vehicle | Left |
| Length | 173 mm |
| Voltage | 24 V |
| Paired article numbers | 193009 |
| Port / Connector type | PRS |
| Number of Connectors / Ports | 2 |
| Mounting bores distance | 78.4 mm |
| Light Design | LED |
| Cable Length | 1250 mm |
| Manufacturer Release | ADR Zone 2 |
| Protection Type (IP Code) | IP69K |
| Type | End Outline Marker Light |
| Fulfils ECE norm | R7, R10, R91 |
| Function | End Outline Marker Light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Manufacturer | Aspöck |
| Placement on Vehicle | Right |
| Length | 173 mm |
| Voltage | 24 V |
| Paired article numbers | 193012 |
| Port / Connector type | PRS |
| Number of Connectors / Ports | 2 |
| Mounting bores distance | 78.4 mm |
| Light Design | LED |
| Cable Length | 1250 mm |
| Manufacturer Release | ADR Zone 2 |
| Protection Type (IP Code) | IP69K |
| Type | End Outline Marker Light |
| Fulfils ECE norm | R7, R10, R91 |
| Function | End Outline Marker Light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 64 mm |
| Voltage | 24 V |
| Inspection Tag | ADR Zone 2 |
| Port / Connector type | PRS |
| Number of Connectors / Ports | 2 |
| Mounting bores distance | 78.4 mm |
| Light Design | LED |
| Cable Length | 1500 mm |
| Protection Type (IP Code) | IP69K |
| Type | End Outline Marker Light |
| Fulfils ECE norm | R7, R10, R91 |
| Function | End Outline Marker Light |
| Manufacturer | Aspöck |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inspection Tag | CISPR 25 Class 4, EMC |
| Number of Connectors / Ports | 2 |
| Rated Power | 50 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Depth | 63 mm |
| Heating / Cooling | with heating |
| Voltage from | 9 V |
| Light Distribution | Long-range illumination |
| Plug Type | DEUTSCH plug |
| Voltage to | 32 V |
| Protection Type (IP Code) | IP6K9K |
| Type | Worklight |
| Fulfils ECE norm | R10 |
| Housing material | Aluminium |
| Lumen | 4500 lm |
| Temperature range from | -30 °C |
| Temperature range to | 50 °C |
| Function | Worklight |
| Extra Description | febi Plus |
| Height | 152 mm |
| Width | 125 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Worklight |
| Lumen | 2600 lm |
| Voltage from | 9 V |
| Depth | 63 mm |
| Mounting Type | Fully assembled |
| Light Design | LED |
| Rated Power | 24 W |
| Light Distribution | Long-range illumination |
| Plug Type | DEUTSCH plug |
| Voltage to | 32 V |
| Protection Type (IP Code) | IP6K9K |
| Type | Worklight |
| Fulfils ECE norm | R10, R148 |
| Height | 123 mm |
| Width | 143 mm |
| Inspection Tag | EMC, ADR, Cispr 25 Class 3 |
| Additional Information | with attachment/mounting material |
| Housing material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Light Design | LED |
| Fulfils ECE norm | R10, R148, R150 |
| Type | Side Marker Light |
| Protection Type (IP Code) | IP67 |
| Depth | 38 mm |
| Rated Power | 15 W |
| Number of Connectors / Ports | 2 |
| Colour | Orange |
| Inspection Tag | EMC |
| Voltage | 24 V |
| Width | 103 mm |
| Height | 55 mm |
| Function | Side Marker Light |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Mounting bores distance | 90 mm |
| Function | Side Marker Light |
| Fulfils ECE norm | R3, R91 |
| Voltage to | 24 V |
| Light Design | LED |
| Height | 50 mm |
| Width | 111 mm |
| Colour | Orange |
| Port / Connector type | PRS |
| Type | Side Marker Light |
| Protection Type (IP Code) | IP67 |
| Cable Length | 500 mm |
| Depth | 24 mm |
| Voltage from | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage to | 24 V |
| Voltage from | 12 V |
| Height | 45 mm |
| Fulfils ECE norm | R10, R3, R91 |
| Light Design | LED |
| Cable Length | 500 mm |
| Type | Side Marker Light |
| Protection Type (IP Code) | IP67 |
| Width | 102 mm |
| Inspection Tag | EMC |
| Colour | Orange |
| Depth | 14 mm |
| Port / Connector type | PRS |
| Mounting bores distance | 84 mm |
| Function | Side Marker Light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage to | 24 V |
| Protection Type (IP Code) | IP67 |
| Depth | 14 mm |
| Port / Connector type | PRS |
| Type | End Outline Marker Light |
| Height | 45 mm |
| Width | 102 mm |
| Inspection Tag | EMC |
| Colour | White |
| Light Design | LED |
| Cable Length | 500 mm |
| Function | End Outline Marker Light |
| Fulfils ECE norm | R10, R3, R7 |
| Mounting bores distance | 84 mm |
| Voltage from | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Mounting bores distance | 116 mm |
| Width | 130 mm |
| Height | 32 mm |
| Voltage to | 24 V |
| Type | End Outline Marker Light |
| Voltage from | 12 V |
| Depth | 14 mm |
| Cable Length | 500 mm |
| Colour | White |
| Inspection Tag | EMC |
| Protection Type (IP Code) | IP67 |
| Function | End Outline Marker Light |
| Light Design | LED |
| Fulfils ECE norm | R10, R7, R3 |
| Port / Connector type | PRS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Side Marker Light |
| Fulfils ECE norm | R10, R3, R91 |
| Function | Side Marker Light |
| Voltage from | 12 V |
| Colour | Orange |
| Inspection Tag | EMC |
| Mounting bores distance | 116 mm |
| Depth | 14 mm |
| Protection Type (IP Code) | IP67 |
| Light Design | LED |
| Cable Length | 500 mm |
| Port / Connector type | PRS |
| Width | 130 mm |
| Voltage to | 24 V |
| Height | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | End Outline Marker Light |
| Light Design | LED |
| Fulfils ECE norm | R3, R7 |
| Port / Connector type | PRS |
| Type | End Outline Marker Light |
| Protection Type (IP Code) | IP67 |
| Voltage to | 24 V |
| Voltage from | 12 V |
| Colour | White |
| Height | 32 mm |
| Width | 130 mm |
| Cable Length | 500 mm |
| Depth | 15 mm |
| Mounting bores distance | 116 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | Orange |
| Light Design | LED |
| Cable Length | 500 mm |
| Type | Side Marker Light |
| Depth | 15 mm |
| Height | 32 mm |
| Width | 130 mm |
| Fulfils ECE norm | R3, R91 |
| Function | Side Marker Light |
| Voltage from | 12 V |
| Voltage to | 24 V |
| Port / Connector type | PRS |
| Mounting bores distance | 116 mm |
| Protection Type (IP Code) | IP67 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Protection Type (IP Code) | IP6K9K |
| Depth | 49 mm |
| Housing material | Aluminium |
| Lumen | 2500 lm |
| Temperature range from | -40 °C |
| Temperature range to | 60 °C |
| Function | Worklight |
| Type | Worklight |
| Fulfils ECE norm | R10, R148 |
| Height | 145 mm |
| Inspection Tag | EMC, ADR, Cispr 25 Class 3 |
| Width | 115 mm |
| Cable Length | 200 mm |
| Light Distribution | Long-range illumination |
| Voltage from | 9 V |
| Voltage to | 36 V |
| Plug Type | DEUTSCH plug |
| Number of Connectors / Ports | 2 |
| Rated Power | 24 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Extra Description | febi Plus |
| Additional Information | with attachment/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.





























