Proud to be a UK-based company
Contact usGeneric Lighting
Categories
Important compatibility info
| Placement on Vehicle | Lateral Mounting |
| Length | 140 mm |
| Height | 52 mm |
| Width | 78 mm |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Colour | yellow (amber) |
| Bulb Type | P21W |
| Light Function | with indicator |
| Light Design | Halogen |
| Mounting Type | Screw Connection |
| Quantity | 1 |
| Number of light functions | 1 |
| Lens Colour | yellow (amber) |
| Registration Type | SAE approved |
| Fastening Type | for horizontal fastening |
| Conductor Number | 2 conductor |
| Plug Type | Male |
| Type | Auxiliary Direction Indicator |
| Fulfils ECE norm | R6 |
| Function | Auxiliary Direction Indicator |
£25.60
Important compatibility info
| Placement on Vehicle | Left, Right, Front |
| Length | 55 mm |
| Height | 88 mm |
| Width | 55 mm |
| Additional Information 2 | without bulbs |
| Voltage | 12 V. 24 V |
| Bulb Type | R5W |
| Light Function | with position light |
| Housing Colour | Black |
| Light Design | Halogen |
| Mounting Type | Fitting, Screw Connection |
| Quantity | 20 |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved |
| Type | Position Light |
| Fulfils ECE norm | R7 |
| Function | Position Light |
£9.85
Important compatibility info
| Type | Position Light |
| Fulfils ECE norm | R7 |
| Function | Position Light |
| Plug Type | open cable ends |
| Power Consumption | 1.8 W |
| Registration Type | ECE approved |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Cable Length | 160 mm |
| Quantity | 1 |
| Light Design | LED |
| Mounting Type | Fitting, Screw Connection |
| Housing Colour | Black |
| Voltage | 24 V |
| Bulb Type | LED |
| Width | 98 mm |
| Placement on Vehicle | Vehicle Front |
| Length | 98 mm |
| Height | 30 mm |
| Light Function | with position light (LED) |
| Number of LEDs | 12 |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£76.87
Important compatibility info
| Placement on Vehicle | Vehicle Front |
| Length | 98 mm |
| Height | 30 mm |
| Width | 98 mm |
| Voltage | 24 V |
| Bulb Type | LED |
| Light Function | with position light (LED) |
| Housing Colour | Black |
| Light Design | LED |
| Mounting Type | Fitting, Screw Connection |
| Quantity | 60 |
| Cable Length | 160 mm |
| Number of light functions | 1 |
| Lens Colour | Crystal clear |
| Registration Type | ECE approved |
| Plug Type | open cable ends |
| Power Consumption | 1.8 W |
| Number of LEDs | 12 |
| Type | Position Light |
| Fulfils ECE norm | R7 |
| Function | Position Light |
Additional Information
Technical Information
Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.
£75.61
Important compatibility info
£20.43
